Lines Matching refs:We
71 % We never want plain's \outer definition of \+ in Texinfo.
213 % We want to insert a rule with the height and depth of the current
231 % and nothing on the terminal. We don't just call \tracingall here,
232 % since that produces some useless output on the terminal. We also make
282 % We dump everything together because we only have one kind of mark.
355 % We don't want .vr (or whatever) entries like this:
387 % (We lessened \vsize for it in \oddfootingyyy.)
487 % We prepended an \empty token at the very beginning and we expand it now,
729 % it in a TeX vbox. We use \vtop instead of \vbox to construct the box
756 % end-of-line in the output. We don't want the end-of-line after
1003 % We'll use ems for NCHARS, close enough.
1005 % We cannot feasibly implement @paragraphindent asis, though.
1024 % We'll use ems for NCHARS like @paragraphindent.
1046 % We switch the definition of this back and forth according to WORD.
1067 % We also make \indent itself not actually do anything until the next
1137 % We have to reset their definitions in case the @math was an argument
1160 % We do .5em per period so that it has the same spacing in the cm
1419 % We have to set dummies so commands such as @code, and characters
1455 % page number. We could generate a destination for the section
1518 % We use the node names as the destinations.
1636 % We don't need math for this font style.
2229 % We provide the user-level command
2267 % of just \STYLE. We do this because \STYLE needs to also set the
2393 % like \smartslanted except unconditionally use \sl. We never want
2410 % We can't just use \exhyphenpenalty, because that only has effect at
2480 % We *must* turn on hyphenation at `-' and `_' in @code.
2486 % We must therefore turn them both off (\tclose does that)
2654 % and it is not used as such in any manual I can find. We need it for
2664 % We print this one point size smaller, since it's intended for
2693 % We use the free feym* fonts from the eurosym package by Henrik
2717 % We set the font at each command, rather than predefining it in
2740 % Hacks for glyphs from the EC fonts similar to \euro. We don't
2753 % We can't distinguish serif/sanserif and italic/slanted, but this
2828 % at the top of the second. We don't want the ragged left on the second.
3111 % line. We do not start a paragraph here because then if the next
3125 % We're going to be starting a paragraph, but we don't want the
3273 % (We will always have one token, because of the test we just made.
3284 % We need the \relax at the end of the \ifnum lines to stop TeX from
3298 % Multiple tokens in the argument. We hope it's a number.
3432 % be just 1. We just use it, whatever it is.
3491 % We use \def instead of \let so that if one of the multitable entries
3583 % \multitableparskip calculation. We used define \multistrut based on
3662 { \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
3694 % We have to swallow the remaining "\_STOP_".
3697 \ifnum\doignorecount = 0 % We have just found the outermost @end.
3722 % We rely on the fact that \parsearg sets \catcode`\ =10.
3757 % We don't want these characters active, ...
3766 % We have this subroutine so that we can handle at least some @value's
4051 % We want to disable all macros so that they are not expanded by \write.
4129 % We can just ignore other control letters.
4195 % We need to get rid of all macros, leaving only the arguments (if present).
4259 % the original text, including any font commands. We write
4284 % But don't do any of this if we're not in vertical mode. We
4290 % We'll have to check whether \lastskip is zero skip. \ifdim is not
4407 % false. We have to make TeX try to read something from the file, so
4437 % We like breaks before the index initials, so insert a bonus.
4598 % Change the page size parameters. We could do this once outside this
4605 % the columns. We compute the gutter based on the line length, so it
4610 % We put the result in a separate register, \doublecolumhsize, so we
4619 % Double the \vsize as well. (We don't need a separate register here,
4692 % definition right away. (We hope \balancecolumns will never be
4701 % the current page. We're now back to normal single-column
4740 % outlines by their "section number". We avoid collisions with chapter
4753 % We do the following ugly conditional instead of the above simple
4957 % as a result of the \message, we just want `@cite' itself. We use
4959 % simply yielding the contents of <toks register>. (We also do this for
5057 % 1) We use \vbox rather than the earlier \line to permit
5248 % updating it with the new noderef stuff. We'll see. --karl, 11aug03.
5376 % \writetocentry if there was no node). We don't want to allow that
5394 % We'll almost certainly start a paragraph next, so don't let that
5417 % We append the current node name (if any) and page number as additional
5422 % We open the .toc file for writing here instead of at @setfilename (or
5448 % writing pdf. These are used in the table of contents. We can't
5508 % redefined for the two-volume lispref. We always output on
5539 % We want a true roman here for the page numbers.
5578 % We'd like to right-justify chapter numbers, but that looks strange
5604 % We use M since it's probably the widest letter.
5662 % We use the same \entry macro as for the index entries.
5772 % Make spacing and below environment symmetrical. We use \parskip here
5908 % We often define two environments, @foo and @smallfoo.
5969 % and narrows the margins. We keep \parskip nonzero in general, since
5988 % We have retained a nonzero parskip for the environment, since we're
6161 % We really want {...\end verbatim} in the body of the macro, but
6187 % We save the uninterpreted tokens, rather than creating a box.
6392 % We are followed by (but not passed) the arguments, if any.
6426 % defun fonts. We use typewriter by default (used to be bold) because:
6462 % We want ()&[] to print specially on the defun line.
6572 % \catcode`\\=\other instead. We'll see whether a problem appears
6682 % We define \csname macarg.\endcsname to be \realbackslash, so
6754 % We need to get `macro parameter char #' into several definitions.
6858 % We need some trickery to remove the optional spaces around the equal
6887 % We don't want such trailing spaces in the node name.
6973 % We know the real title if we have the xref values.
7007 % instead of "[somenode], p.3". We distinguish them by the
7313 % We want to typeset this text as a normal paragraph, even if the
7409 % @image. We use the macros from epsf.tex to support this.
7424 % We will only complain once about lack of epsf.tex.
7483 % etc. We don't actually implement floating yet, we always include the
7501 % We keep a separate counter for each FLOATTYPE, which we reset at each
7516 % We can't be used inside a paragraph.
7538 % We want each FLOATTYPE to be numbered separately (Figure 1,
7674 % \setref calls this to get the XREFLABEL-snt value. We want an @xref
7675 % to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
7691 % (safe) float type for this float. We set \iffloattype to #2.
7726 % This is called on each entry in a list of floats. We're passed the
7728 % aux file. We strip off the -title and look up \XRLABEL-lof, which
8629 % using an old version of TeX, don't do anything. We want the amount of
8631 % \hsize. We call this whenever the paper size is set.
8646 % We also call \setleading{\textleading}, so the caller should define