Lines Matching refs:logmsg
295 # logmsg is our general message logging subroutine.
297 sub logmsg {
318 logmsg "runtests.pl received SIG$signame, exiting\n";
391 logmsg "startnew: $cmd\n" if ($verbose);
397 logmsg "startnew: fork() failure detected\n";
418 logmsg "startnew: $pidfile faked with pid=$child\n" if($verbose);
421 logmsg "startnew: failed to write fake $pidfile with pid=$child\n";
426 logmsg "startnew: child process has failed to start\n" if($verbose);
446 logmsg "startnew: child process has died, server might start up\n"
539 logmsg " CMD: $testcmd\n" if($verbose);
551 logmsg " found no allocs to make fail\n";
555 logmsg " $count allocations to make fail\n";
570 logmsg "Fail alloc no: $limit at $now\r";
579 logmsg "*** Alloc number $limit is now set to fail ***\n" if($gdbthis);
588 #logmsg "$_ Returned " . $ret >> 8 . "\n";
595 logmsg " core dumped\n";
603 logmsg " system() returned $ret\n";
617 logmsg "** MEMORY FAILURE\n";
618 logmsg @memdata;
619 logmsg `$memanalyze -l $memdump`;
624 logmsg " Failed on alloc number $limit in test.\n",
631 logmsg "torture OK\n";
690 logmsg "Warning: $server server unexpectedly alive\n";
734 logmsg "RUN: $cmd\n" if($verbose);
739 logmsg "RUN: curl command died with a coredump\n";
744 logmsg "RUN: curl command returned $res\n";
747 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
767 logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
771 logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
808 logmsg "RUN: $cmd\n" if($verbose);
813 logmsg "RUN: curl command died with a coredump\n";
826 logmsg "RUN: Unknown server on our $server port: $port\n";
834 logmsg "RUN: Verifying our test $server server took $took seconds\n";
871 logmsg "RUN: $cmd\n" if($verbose);
876 logmsg "RUN: curl command died with a coredump\n";
881 logmsg "RUN: curl command returned $res\n";
884 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
904 logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
908 logmsg "RUN: Unknown server on our $server port: $port\n";
932 logmsg "RUN: SSH server has died after starting up\n";
952 logmsg "RUN: SFTP server cannot find $sftpexe\n";
958 logmsg "RUN: SFTP server cannot find $sshexe\n";
1011 logmsg "RUN: $cmd\n" if($verbose);
1016 logmsg "RUN: curl command died with a coredump\n";
1021 logmsg "RUN: curl command returned $res\n";
1024 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
1045 logmsg "RUN: $server server has died after starting up\n";
1055 logmsg "RUN: failed to resolve host (https://$ip:$port/verifiedserver)\n";
1059 logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
1081 logmsg "RUN: SOCKS server has died after starting up\n";
1158 logmsg " server precheck FAILED (unresponsive $srvrname server)\n";
1225 logmsg "RUN: failed to start the $srvrname server\n";
1235 logmsg "RUN: $srvrname server failed verification\n";
1245 logmsg "RUN: $srvrname server is now running PID $httppid\n";
1300 logmsg "RUN: failed to start the $srvrname server\n";
1310 logmsg "RUN: $srvrname server failed verification\n";
1320 logmsg "RUN: $srvrname server is now running PID $httppid\n";
1381 logmsg "RUN: failed to start the $srvrname server\n";
1391 logmsg "RUN: $srvrname server failed verification\n";
1403 logmsg "RUN: $srvrname server is now running PID $httpspid\n";
1461 logmsg "RUN: failed to start the $srvrname server\n";
1471 logmsg "RUN: $srvrname server failed verification\n";
1481 logmsg "RUN: $srvrname server is now running PID $httptlspid\n";
1556 logmsg "RUN: failed to start the $srvrname server\n";
1566 logmsg "RUN: $srvrname server failed verification\n";
1577 logmsg "RUN: $srvrname server is now running PID $ftppid\n";
1638 logmsg "RUN: failed to start the $srvrname server\n";
1648 logmsg "RUN: $srvrname server failed verification\n";
1660 logmsg "RUN: $srvrname server is now running PID $ftpspid\n";
1720 logmsg "RUN: failed to start the $srvrname server\n";
1730 logmsg "RUN: $srvrname server failed verification\n";
1740 logmsg "RUN: $srvrname server is now running PID $tftppid\n";
1801 logmsg "RUN: failed to start the $srvrname server\n";
1811 logmsg "RUN: $srvrname server failed verification\n";
1821 logmsg "RUN: $srvrname server is now running PID $rtsppid\n";
1883 logmsg "RUN: failed to start the $srvrname server\n";
1895 logmsg "RUN: $srvrname server failed verification\n";
1911 logmsg "RUN: SFTP server failed verification\n";
1923 logmsg "RUN: $srvrname server is now running PID $pid2\n";
1966 logmsg "RUN: SOCKS server cannot find running SSH server\n";
1974 logmsg "RUN: SOCKS server cannot find $sshdexe\n";
1983 logmsg "$sshderror\n" if($verbose);
1984 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
1988 logmsg "ssh server found $sshd is $sshdverstr\n" if($verbose);
1993 logmsg "RUN: SOCKS server cannot find $sshexe\n";
2002 logmsg "$ssherror\n" if($verbose);
2003 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
2011 logmsg "ssh client found $ssh is $sshverstr\n";
2012 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
2016 logmsg "ssh client found $ssh is $sshverstr\n" if($verbose);
2021 logmsg "Warning: version mismatch: sshd $sshdverstr - ssh $sshverstr\n"
2027 logmsg "RUN: SOCKS server cannot find $sshconfig\n";
2040 logmsg "RUN: failed to start the $srvrname server\n";
2053 logmsg "RUN: $srvrname server failed verification\n";
2062 logmsg "RUN: $srvrname server is now running PID $pid2\n";
2222 # logmsg "FILTER: off $filter from $infile to $ofile\n";
2248 logmsg "\n $testnum: $subject FAILED:\n";
2249 logmsg showdiff($LOGDIR, $firstref, $secondref);
2252 logmsg "FAILED\n";
2256 logmsg "FAIL: $testnum - $testname - $subject\n";
2460 logmsg "unable to get curl's version, further details are:\n";
2461 logmsg "issued command: \n";
2462 logmsg "$versioncmd \n";
2464 logmsg "command failed with: \n";
2465 logmsg "$versnoexec \n";
2468 logmsg sprintf("command died with signal %d, and %s coredump.\n",
2472 logmsg sprintf("command exited with value %d \n", $versretval >> 8);
2474 logmsg "contents of $curlverout: \n";
2476 logmsg "contents of $curlvererr: \n";
2521 logmsg ("********* System characteristics ******** \n",
2530 logmsg("*\n",
2535 logmsg sprintf("* Server SSL: %8s", $stunnel?"ON ":"OFF");
2536 logmsg sprintf(" libcurl SSL: %s\n", $ssl_version?"ON ":"OFF");
2537 logmsg sprintf("* debug build: %8s", $debug_build?"ON ":"OFF");
2538 logmsg sprintf(" track memory: %s\n", $has_memory_tracking?"ON ":"OFF");
2539 logmsg sprintf("* valgrind: %8s", $valgrind?"ON ":"OFF");
2540 logmsg sprintf(" HTTP IPv6 %s\n", $http_ipv6?"ON ":"OFF");
2541 logmsg sprintf("* FTP IPv6 %8s", $ftp_ipv6?"ON ":"OFF");
2542 logmsg sprintf(" Libtool lib: %s\n", $libtool?"ON ":"OFF");
2543 logmsg sprintf("* Shared build: %-3s", $has_shared);
2544 logmsg sprintf(" Resolver: %s\n", $resolver);
2546 logmsg sprintf("* SSL library: %13s\n", $ssllib);
2549 logmsg "* Ports:\n";
2551 logmsg sprintf("* HTTP/%d ", $HTTPPORT);
2552 logmsg sprintf("FTP/%d ", $FTPPORT);
2553 logmsg sprintf("FTP2/%d ", $FTP2PORT);
2554 logmsg sprintf("RTSP/%d ", $RTSPPORT);
2556 logmsg sprintf("FTPS/%d ", $FTPSPORT);
2557 logmsg sprintf("HTTPS/%d ", $HTTPSPORT);
2559 logmsg sprintf("\n* TFTP/%d ", $TFTPPORT);
2561 logmsg sprintf("HTTP-IPv6/%d ", $HTTP6PORT);
2562 logmsg sprintf("RTSP-IPv6/%d ", $RTSP6PORT);
2565 logmsg sprintf("FTP-IPv6/%d ", $FTP6PORT);
2568 logmsg sprintf("TFTP-IPv6/%d ", $TFTP6PORT);
2570 logmsg sprintf("\n* GOPHER/%d ", $GOPHERPORT);
2572 logmsg sprintf("GOPHER-IPv6/%d", $GOPHERPORT);
2574 logmsg sprintf("\n* SSH/%d ", $SSHPORT);
2575 logmsg sprintf("SOCKS/%d ", $SOCKSPORT);
2576 logmsg sprintf("POP3/%d ", $POP3PORT);
2577 logmsg sprintf("IMAP/%d ", $IMAPPORT);
2578 logmsg sprintf("SMTP/%d\n", $SMTPPORT);
2580 logmsg sprintf("* POP3-IPv6/%d ", $POP36PORT);
2581 logmsg sprintf("IMAP-IPv6/%d ", $IMAP6PORT);
2582 logmsg sprintf("SMTP-IPv6/%d\n", $SMTP6PORT);
2585 logmsg sprintf("* HTTPTLS/%d ", $HTTPTLSPORT);
2587 logmsg sprintf("HTTPTLS-IPv6/%d ", $HTTPTLS6PORT);
2589 logmsg "\n";
2591 logmsg sprintf("* HTTP-PIPE/%d \n", $HTTPPIPEPORT);
2595 logmsg "***************************************** \n";
2753 logmsg "Warning: test$testnum not present in tests/data/Makefile.am\n";
2756 logmsg "Warning: test$testnum is explicitly disabled\n";
2763 logmsg "RUN: $testnum doesn't look like a test case\n";
3121 logmsg "prechecked $cmd\n" if($verbose);
3135 logmsg sprintf("test %03d SKIPPED: $why\n", $testnum);
3142 logmsg sprintf("test %03d...", $testnum) if(!$automakestyle);
3191 logmsg "[$testname]\n" if(!$short);
3240 logmsg "ERROR: section client=>file has no name attribute\n";
3246 # logmsg "DEBUG: writing file " . $filename . "\n";
3328 logmsg "The tool set in the test case for this: '$tool' does not exist\n";
3343 logmsg "This test cannot run event based\n";
3386 logmsg "$CMDLINE\n";
3403 logmsg "perl: $code\n";
3404 logmsg "precommand: $@";
3458 logmsg "core dumped\n";
3460 logmsg "running gdb for post-mortem analysis:\n";
3482 logmsg "Warning: server logs lock timeout ",
3559 logmsg "Warning: $server server unexpectedly alive\n";
3576 logmsg "postcheck $cmd\n" if($verbose);
3581 logmsg " postcheck FAILED\n";
3788 logmsg "ERROR: section verify=>file$partsuffix ".
3851 logmsg sprintf("\n%s returned $cmdres, when expecting %s\n",
3854 logmsg " exit FAILED\n";
3862 logmsg "\n** ALERT! memory tracking with no output file?\n"
3876 logmsg "\n** MEMORY FAILURE\n";
3877 logmsg @memdata;
3894 logmsg "ERROR: unable to read $LOGDIR\n";
3909 logmsg "ERROR: valgrind log file missing for test $testnum\n";
3917 logmsg "FAIL: $testnum - $testname - valgrind\n";
3920 logmsg " valgrind ERROR ";
3921 logmsg @e;
3931 logmsg " valgrind SKIPPED\n";
3942 logmsg "$ok " if(!$short);
3952 logmsg sprintf("OK (%-3d out of %-3d, %s)\n", $count, $total, $left);
3955 logmsg "PASS: $testnum - $testname\n";
3989 logmsg sprintf("* kill pid for %s => %d\n",
4008 logmsg "Warning: $server server unexpectedly alive\n";
4074 logmsg sprintf("* pid ftp-ipv6 => %d %d\n", $pid,
4090 logmsg sprintf ("* pid gopher => %d %d\n", $pid, $pid2)
4107 logmsg sprintf("* pid gopher-ipv6 => %d %d\n", $pid,
4123 logmsg sprintf ("* pid http => %d %d\n", $pid, $pid2)
4140 logmsg sprintf ("* pid http-proxy => %d %d\n", $pid, $pid2)
4156 logmsg sprintf("* pid http-ipv6 => %d %d\n", $pid, $pid2)
4173 logmsg sprintf ("* pid http-pipe => %d %d\n", $pid, $pid2)
4202 logmsg sprintf("* pid rtsp-ipv6 => %d %d\n", $pid, $pid2)
4237 logmsg sprintf("* pid ftps => %d %d\n", $pid, $pid2)
4276 logmsg sprintf("* pid https => %d %d\n", $pid, $pid2)
4295 logmsg sprintf("* pid httptls => %d %d\n", $pid, $pid2)
4314 logmsg sprintf("* pid httptls-ipv6 => %d %d\n", $pid, $pid2)
4369 logmsg "Not OpenSSH or SunSSH; socks5 tests need at least OpenSSH 3.7\n";
4374 logmsg "$sshdverstr insufficient; socks5 tests need at least OpenSSH 3.7\n";
4379 logmsg "$sshdverstr insufficient; socks5 tests need at least SunSSH 1.0\n";
4385 logmsg "* starts no server\n" if ($verbose);
4448 logmsg "\nTest suite total running time breakdown per task...\n\n";
4500 logmsg "Spent ". sprintf("%08.3f ", $timesrvrtot) .
4502 logmsg "Spent ". sprintf("%08.3f ", $timepreptot) .
4504 logmsg "Spent ". sprintf("%08.3f ", $timetooltot) .
4506 logmsg "Spent ". sprintf("%08.3f ", $timelocktot) .
4508 logmsg "Spent ". sprintf("%08.3f ", $timevrfytot) .
4510 logmsg "Spent ". sprintf("%08.3f ", $timetesttot) .
4514 logmsg "\nTest server starting and verification time per test ".
4516 logmsg "-time- test\n";
4517 logmsg "------ ----\n";
4520 logmsg "$txt\n";
4524 logmsg "\nTest definition reading and preparation time per test ".
4526 logmsg "-time- test\n";
4527 logmsg "------ ----\n";
4530 logmsg "$txt\n";
4534 logmsg "\nTest tool execution time per test ".
4536 logmsg "-time- test\n";
4537 logmsg "------ ----\n";
4540 logmsg "$txt\n";
4544 logmsg "\nTest server logs lock removal time per test ".
4546 logmsg "-time- test\n";
4547 logmsg "------ ----\n";
4550 logmsg "$txt\n";
4554 logmsg "\nTest results verification time per test ".
4556 logmsg "-time- test\n";
4557 logmsg "------ ----\n";
4560 logmsg "$txt\n";
4564 logmsg "\nTotal time per test ".
4566 logmsg "-time- test\n";
4567 logmsg "------ ----\n";
4570 logmsg "$txt\n";
4573 logmsg "\n";
4766 #logmsg "Valgrind failure, disable it\n";
4922 logmsg "can't log command lines to $CURLLOG\n";
4944 logmsg " $line\n";
4956 logmsg "=== File too long: $tailskip lines omitted here\n";
4959 logmsg "$tail[$_]";
4973 logmsg "== Contents of files in the $LOGDIR/ dir after test $testnum\n";
5014 logmsg "=== Start of file $log\n";
5016 logmsg "=== End of file $log\n";
5055 logmsg "\n - abort tests\n";
5081 logmsg sprintf("TESTDONE: $ok tests out of $total reported OK: %d%%\n",
5085 logmsg "TESTFAIL: These test cases failed: $failed\n";
5089 logmsg "TESTFAIL: No tests were performed\n";
5093 logmsg "TESTDONE: $all tests were considered during ".
5099 logmsg "TESTINFO: $skipped tests were skipped due to these restraints:\n";
5113 logmsg ", " if($c);
5114 logmsg $_;
5120 logmsg " and ".($c-$max)." more";
5122 logmsg ")\n";