dist/ntpd/refclock_neoclock4x.c

194       msyslog(LOG_CRIT, "NeoClock4X(%d): (tcgetattr) can't query serial port settings: %m", unit);
208       msyslog(LOG_CRIT, "NeoClock4X(%d): (tcsetattr) can't set serial port 2400 8N2: %m", unit);
216       msyslog(LOG_CRIT, "NeoClock4X(%d): (tcgetattr) can't query serial port settings: %m", unit);
229       msyslog(LOG_CRIT, "NeoClock4X(%d): (tcsetattr) can't set serial port 2400 8N2: %m", unit);
238       msyslog(LOG_CRIT, "NeoClock4X(%d): (TCGETA) can't query serial port settings: %m", unit);
251       msyslog(LOG_CRIT, "NeoClock4X(%d): (TSGETA) can't set serial port 2400 8N2: %m", unit);
256   msyslog(LOG_EMERG, "NeoClock4X(%d): don't know how to set port to 2400 8N2 with this OS!", unit);
266       msyslog(LOG_CRIT, "NeoClock4X(%d): can't query RTS/DTR state: %m", unit);
277       msyslog(LOG_CRIT, "NeoClock4X(%d): can't set RTS/DTR to power neoclock4x: %m", unit);
282   msyslog(LOG_EMERG, "NeoClock4X(%d): don't know how to set DTR/RTS to power NeoClock4X with this OS!",
291       msyslog(LOG_ERR, "NeoClock4X(%d): can't allocate memory for: %m",unit);
344   msyslog(LOG_EMERG, "NeoClock4X(%d): unknown firmware defined at compile time for NeoClock4X",
356 	msyslog(LOG_INFO, "NeoClock4X(%d): checking NeoClock4X firmware version (%d/5)", unit, tries);
378       msyslog(LOG_ERR, "NeoClock4X(%d): error add peer to ntpd: %m", unit);
387     msyslog(LOG_INFO, "NeoClock4X(%d): receiver setup successful done", unit);
415                       msyslog(LOG_CRIT, "NeoClock4X(%d): can't query RTS/DTR state: %m",
427                       msyslog(LOG_CRIT, "NeoClock4X(%d): can't set RTS/DTR to power neoclock4x: %m",
439   msyslog(LOG_ERR, "NeoClock4X(%d): shutdown", unit);
442     msyslog(LOG_INFO, "NeoClock4X(%d): receiver shutdown done", unit);
477 	msyslog(LOG_WARNING, "NeoClock4X(%d): received data has invalid length, expected %d bytes, received %d bytes: %s",
494 	msyslog(LOG_WARNING, "NeoClock4X(%d): received data has invalid chksum: %s",
510 	    msyslog(LOG_NOTICE, "NeoClock4X(%d): quartz clock is not initialized: %s",
520 	msyslog(LOG_NOTICE, "NeoClock4X(%d): using uninitialized quartz clock for time synchronization: %s",
547       msyslog(LOG_DEBUG, "NeoClock4X(%d): received data: %s",
587       msyslog(LOG_WARNING, "NeoClock4X(%d): date/time out of range: %s",
621       msyslog(LOG_DEBUG, "NeoClock4X(%d): calculated UTC date/time: %04d-%02d-%02d %02d:%02d:%02d.%03ld",
648 	msyslog(LOG_WARNING, "NeoClock4X(%d): refclock_process failed!", up->unit);
685       msyslog(LOG_ERR, "NeoClock4X(%d): control: unit invalid/inactive", unit);
692       msyslog(LOG_ERR, "NeoClock4X(%d): control: unit invalid/inactive", unit);
699       msyslog(LOG_ERR, "NeoClock4X(%d): control: unit invalid/inactive", unit);
710 	    msyslog(LOG_NOTICE, "NeoClock4X(%d): using fudgetime1 with %0.5fs from ntp.conf.",
718 	    msyslog(LOG_NOTICE, "NeoClock4X(%d): quartz clock is used to synchronize time if radio clock has no reception.", unit);
723 	    msyslog(LOG_NOTICE, "NeoClock4X(%d): time is only adjusted with radio signal reception.", unit);
937 	      msyslog(LOG_ERR, "NeoClock4X(%d): can't read firmware version (timeout)", unit);
943 	      msyslog(LOG_ERR, "NeoClock4X(%d): can't read firmware version (garbage)", unit);
951                   msyslog(LOG_DEBUG, "NeoClock4x(%d): read: %m", unit);
977 	  msyslog(LOG_NOTICE, "NeoClock4X(%d): firmware %c = %02Xh", unit, c, c);
1014       msyslog(LOG_ERR, "NeoClock4X(%d): can't query firmware version", unit);
1023 	msyslog(LOG_INFO, "NeoClock4X(%d): firmware version: %s", unit, firmware);
1027 	  msyslog(LOG_INFO, "NeoClock4X(%d): Your NeoClock4X uses the new R2 firmware release. Please note the changed LED behaviour.", unit);
1055       msyslog(LOG_CRIT, "NeoClock4X(%d): firmware version \"%c\" not supported with this driver version!", unit, *firmwaretag);