Lines Matching +defs:not +defs:save
363 If the FUNCTION was not advised already, then its advice info will be
422 `disable': The defined advice will be disabled, hence, it will not be used
476 of SPACING to use, and whether or not to REPEAT the rule throughout
649 its' offspring - distinctive bullets are not changed, others
652 the offspring are not affected.
693 mode, and auto-encryption of topics pending encryption on save.
697 containing the cursor was encrypted for a save, it is
787 space. After that is the ITEM HEADER text, which is not part of
826 OPEN: A TOPIC that is not CLOSED, though its OFFSPRING or BODY may be.
853 may not know they exist. You can use this command to reread a specific
908 either not processed, SGR control sequences are filtered using
1032 Any appointments made with `appt-add' are not affected by this
1036 appointment package (if it is not already active).
1140 documentation that is not stored in the documentation file and show key
1161 save it, the contents of that buffer will be saved back into the
1183 TABs are not respected, and may be converted into spaces at any time.
1415 artist-rubber-banding Interactively do rubber-banding or not
1417 artist-second-char ...when not rubber-banding
1428 artist-picture-compatibility Whether or not to be picture mode compatible
1514 Setting this variable directly does not take effect;
1566 Setting this variable directly does not take effect;
1594 save the buffer too.
1657 writing before you save the file!
1674 Setting this variable directly does not take effect;
1699 Setting this variable directly does not take effect;
1775 Setting this variable directly does not take effect;
1949 not, and be given your score. Your score is the number of letters and
1968 not emerge from the box. On the playfield, hits are
2036 ;;;### (autoloads (bookmark-bmenu-list bookmark-load bookmark-save
2047 It is not bound to any key by default: to bind it
2063 (define-key bookmark-map "s" 'bookmark-save)
2068 With prefix arg, will not overwrite a bookmark that has the same name
2149 not be deleted. Defaults to the \"current\" bookmark (that is, the
2158 Don't use this in Lisp programs; use `bookmark-save' instead.
2162 (autoload (quote bookmark-save) "bookmark" "\
2165 `bookmark-default-file'. With a prefix arg, save it in file FILE
2170 pass no arguments. Or pass in nil and FILE, and it will save in FILE
2172 user will be interactively queried for a file to save in.
2214 (defvar menu-bar-bookmark-map (let ((map (make-sparse-keymap "Bookmark functions"))) (define-key map [load] (quote ("Load a Bookmark File..." . bookmark-load))) (define-key map [write] (quote ("Save Bookmarks As..." . bookmark-write))) (define-key map [save] (quote ("Save Bookmarks" . bookmark-save))) (define-key map [edit] (quote ("Edit Bookmark List" . bookmark-bmenu-list))) (define-key map [delete] (quote ("Delete Bookmark..." . bookmark-delete))) (define-key map [rename] (quote ("Rename Bookmark..." . bookmark-rename))) (define-key map [locate] (quote ("Insert Location..." . bookmark-locate))) (define-key map [insert] (quote ("Insert Contents..." . bookmark-insert))) (define-key map [set] (quote ("Set Bookmark..." . bookmark-set))) (define-key map [jump] (quote ("Jump to Bookmark..." . bookmark-jump))) map))
2238 If the value is not a function it should be a list of pairs
2305 but point is not changed. Doesn't let you edit the URL like
2387 ignored. Firefox for Windows does not support the \"-remote\"
2644 changes to a supertype are not reflected in its subtypes).
2710 ;;;;;; batch-byte-compile-if-not-done display-call-tree byte-compile
2735 If the `.elc' file does not exist, normally this function *does not*
2778 The call graph does not include macros, inline functions, or
2782 The call tree also lists those functions which are not known to be called
2788 (autoload (quote batch-byte-compile-if-not-done) "bytecomp" "\
3061 date is not visible in the window.
3070 List of functions called whenever the current date is not visible.
3113 capitalized or not. Any of DAY, MONTH, or MONTHNAME, YEAR can be
3115 date does not contain a year, it is generic and applies to any
3135 nonmarking--that is, it will not be marked on dates in the calendar
3141 Lines not in one the above formats are ignored. Here are some sample diary
3157 no trailing blanks or punctuation, then that line is not displayed in the
3201 Symbol indicating that a diary entry is not to be marked in the calendar.")
3252 Names can be capitalized or not, written in full (as specified by the
3256 Setting this variable directly does not take effect (if the
3298 It is to be used for diary entries that are not found in the diary file.
3349 diary buffer will not show days for which there are no diary entries, even
3392 If nil, do not include days with no diary entry in the list of diary entries.
3393 Such days will then not be shown in the fancy diary buffer, even if they
3522 movement commands will not work correctly.")
3744 have been set (more precisely, whose default values are not the symbol
3745 `set-from-style') will not be changed. This avoids overriding global settings
3750 values are not the symbol `set-from-style') will not be overridden. CC Mode
3773 offset for that syntactic element. The optional argument is not used
3817 Emacs, to compile a CCL program which calls another CCL program not
3819 now CCL program names are resolved not at compile time but before
3844 CCL_MAIN_CODE is terminated, CCL_EOF_CODE is not executed.
4098 errors. Does not check for comment or space warnings.
4109 errors. Does not check for comment or space warnings.
4118 doesn't work is just not useful. Comments, doc strings, and rogue
4143 save warnings in a separate buffer. Second optional argument START-POINT
4150 Prefix argument TAKE-NOTES non-nil means to save warnings in a
4158 Prefix argument TAKE-NOTES non-nil means to save warnings in a
4182 non-nil, then do not call error, but call `message' instead.
4326 and digits provide prefix arguments. Tab does not indent.
4347 This variable is not used at present, but it is defined in hopes that
4483 systems, the Mac-style EOL conversion is currently not supported by the
4540 inserted. Note that this might not be the same as the buffer contents between
4557 running process in that buffer, it is not restarted. Optional fourth arg
4570 running process in that buffer, it is not restarted. Optional third arg
4595 If NO-DISPLAY is non-nil, do not show the output buffer.
4603 If NO-DISPLAY is non-nil, do not show the output buffer.
4662 ;;;;;; compilation-ask-about-save compilation-window-height compilation-mode-hook)
4701 (defvar compilation-ask-about-save t "\
4702 *Non-nil means \\[compile] asks which buffers to save before compiling.
4705 (custom-autoload (quote compilation-ask-about-save) "compile" t)
4709 Elements should be directory names, not file names of directories.
4833 Setting this variable directly does not take effect;
4861 to complete, the first TAB just says \"Next char not unique\" and the
4876 Setting this variable directly does not take effect;
4955 characters are composed not relatively but according to COMPONENTS.
5135 Because of this great variety of nuances, which are often not
5379 it will not do any expansion. See also help on variable
5552 A value of nil means CRiSP mode is not enabled. A value of t
5555 Setting this variable directly does not take effect;
5615 Setting this variable directly does not take effect;
5630 active, so in most cases, they do not conflict with the normal
5645 Transient Mark mode while CUA mode is enabled does not work; if you
5660 "not work correctly with this version of GNU Emacs.\n\n"
5668 ;;;### (autoloads (customize-menu-create custom-menu-create customize-save-customized
5669 ;;;;;; custom-save-all custom-file customize-browse custom-buffer-create-other-window
5675 ;;;;;; customize-mode customize customize-save-variable customize-set-variable
5727 (autoload (quote customize-save-variable) "cus-edit" "\
5728 Set the default for VARIABLE to VALUE, and save it for future sessions.
5848 Customize all user options set in this session but not saved.
5868 that are not customizable options, as well as faces and groups
5875 With prefix arg, include variables that are not customizable options
5917 as specified by `user-init-file'. If the value is not nil,
5928 save all customizations in this file, but does not load it.
5936 If you save this option using Custom, Custom will write all
5940 present in that file. It will not delete any customizations from
5944 file. Otherwise, Emacs will not load the file when it starts up,
5945 and hence will not set `custom-file' to that file either.")
5949 (autoload (quote custom-save-all) "cus-edit" "\
5954 (autoload (quote customize-save-customized) "cus-edit" "\
6097 Setting this variable directly does not take effect;
6177 If the cursor has not moved from the end of the previous expansion and
6179 with the next possible expansion not yet tried.
6203 Whole-line comments (matching dcl-comment-line-regexp) are not indented.
6204 Data lines are not indented.
6209 Commands not usually bound to keys:
6211 \\[dcl-save-nondefault-options] Save changed options
6212 \\[dcl-save-all-options] Save all options
6213 \\[dcl-save-option] Save any option
6214 \\[dcl-save-mode] Save buffer mode
6231 Lines matching this regexp will not be indented.
6289 $! This is a comment line that is not indented (it matches
6305 Data lines are not indented at all.
6344 its execution. FUNCTION can also be a primitive that is not a special
6345 form, in which case stepping is not possible. Break-on-entry for
6482 Setting this variable directly does not take effect;
6516 DOCSTRING: an optional documentation string--if you do not supply one,
6519 hooks for the new mode. Do not use `interactive' here.
6594 ;;;### (autoloads (desktop-revert desktop-save-in-desktop-dir desktop-change-dir
6595 ;;;;;; desktop-load-default desktop-read desktop-remove desktop-save
6596 ;;;;;; desktop-clear desktop-locals-to-save desktop-save-mode) "desktop"
6600 (defvar desktop-save-mode nil "\
6602 See the command `desktop-save-mode' for a description of this minor mode.")
6604 (custom-autoload (quote desktop-save-mode) "desktop" nil)
6606 (autoload (quote desktop-save-mode) "desktop" "\
6610 saved from one session to another. See variable `desktop-save'
6615 (defvar desktop-locals-to-save (quote (desktop-locals-to-save truncate-lines case-fold-search case-replace fill-column overwrite-mode change-log-default-name line-number-mode column-number-mode size-indication-mode buffer-file-coding-system indent-tabs-mode tab-width indicate-buffer-boundaries indicate-empty-lines show-trailing-whitespace)) "\
6616 List of local variables to save for each buffer.
6618 modes are restored automatically; they should not be listed here.")
6620 (custom-autoload (quote desktop-locals-to-save) "desktop" t)
6622 (defvar desktop-save-buffer nil "\
6623 When non-nil, save buffer status in desktop file.
6626 If the value is a function, it is called by `desktop-save' with argument
6627 DESKTOP-DIRNAME to obtain auxiliary information to save in the desktop
6644 Buffers with a major mode not specified here, are restored by the default
6683 Minor modes not specified here, are restored by the standard minor mode
6703 been set, but local variables listed in desktop-buffer-locals has not yet been
6728 (autoload (quote desktop-save) "desktop" "\
6730 Parameter DIRNAME specifies where to save the desktop file.
6760 Kill the desktop as specified by variables `desktop-save-mode' and
6761 `desktop-save', then clear the desktop and load the desktop file in
6766 (autoload (quote desktop-save-in-desktop-dir) "desktop" "\
6852 `emacs -batch' does not load your `.emacs' file, you must ensure that
6924 When the buffer is read-only, the ESC prefix is not necessary.
6958 some of the `ls' switches are not supported; see the doc string of
6992 If a character, renamed files (whether previously marked or not)
7037 The directory name must be absolute, but need not be fully expanded.")
7070 Like `dired' but returns the dired buffer as value, does not select it.
7161 \\[set-mark-command], not by Dired's \\[dired-mark] command.)
7198 (not (= size1 size2)) - mark files with different sizes
7199 (not (string= (nth 8 fa1) (nth 8 fa2))) - mark files with different modes
7200 (not (and (= (nth 2 fa1) (nth 2 fa2)) - mark files with different UID
7261 `*' and `?' when not surrounded by whitespace have no special
7268 This feature does not try to redisplay Dired buffers afterward, as
7288 Kill all marked lines (not the files).
7297 command with a prefix argument (the value does not matter).
7332 the buffer will not reset them. However, using `dired-undo' to re-insert
7475 the buffer will not reset them. However, using `dired-undo' to re-insert
7497 When called interactively and not on a subdir line, go to this subdir's line.
7590 not absolute ones like
7610 If directory tracking does not seem to be working, you can use the
7629 If OBJECT is not already compiled, we compile it, but do not
7743 display not as octal escapes, but as accented characters. Codes 146
7744 and 160 display as apostrophe and space, even though they are not the
7840 Setting this variable directly does not take effect;
7912 :global GLOBAL If non-nil specifies that the minor mode is not meant to be
8029 This is normally not needed because keyboard equivalents are usually
8062 Prepend the name with `(*) ' or `( ) ' depending on if selected or not.
8064 Prepend the name with `[X] ' or `[ ] ' depending on if selected or not.
8162 the name of a file to save the PostScript image in, instead of sending
8166 is nil, send the image to the printer. If FILENAME is a string, save
8168 number, prompt the user for the name of the file to save in.
8386 ;;;### (autoloads (ebrowse-statistics ebrowse-save-tree-as ebrowse-save-tree
8403 Letters do not insert themselves, they are commands.
8405 E.g.\\[save-buffer] writes the tree to the file it was loaded from.
8484 FIRST-TIME non-nil means this is not a repetition, but the first time.
8528 (autoload (quote ebrowse-save-tree) "ebrowse" "\
8533 (autoload (quote ebrowse-save-tree-as) "ebrowse" "\
8536 Otherwise, FILE-NAME specifies the file to save the tree in.
8614 An extant spec symbol is a symbol that is not a function and has a
8636 \(Normally `defvar' and `defcustom' do not alter the value if there
8862 patch. If not given, the user is prompted according to the prefix argument.
8915 (ediff-cond-compile-for-xemacs-or-emacs (progn (defvar ediff-menu (quote ("Compare" ["Two Files..." ediff-files t] ["Two Buffers..." ediff-buffers t] ["Three Files..." ediff-files3 t] ["Three Buffers..." ediff-buffers3 t] "---" ["Two Directories..." ediff-directories t] ["Three Directories..." ediff-directories3 t] "---" ["File with Revision..." ediff-revision t] ["Directory Revisions..." ediff-directory-revisions t] "---" ["Windows Word-by-word..." ediff-windows-wordwise t] ["Windows Line-by-line..." ediff-windows-linewise t] "---" ["Regions Word-by-word..." ediff-regions-wordwise t] ["Regions Line-by-line..." ediff-regions-linewise t]))) (defvar ediff-merge-menu (quote ("Merge" ["Files..." ediff-merge-files t] ["Files with Ancestor..." ediff-merge-files-with-ancestor t] ["Buffers..." ediff-merge-buffers t] ["Buffers with Ancestor..." ediff-merge-buffers-with-ancestor t] "---" ["Directories..." ediff-merge-directories t] ["Directories with Ancestor..." ediff-merge-directories-with-ancestor t] "---" ["Revisions..." ediff-merge-revisions t] ["Revisions with Ancestor..." ediff-merge-revisions-with-ancestor t] ["Directory Revisions..." ediff-merge-directory-revisions t] ["Directory Revisions with Ancestor..." ediff-merge-directory-revisions-with-ancestor t]))) (defvar epatch-menu (quote ("Apply Patch" ["To a file..." ediff-patch-file t] ["To a buffer..." ediff-patch-buffer t]))) (defvar ediff-misc-menu (quote ("Ediff Miscellanea" ["Ediff Manual" ediff-documentation t] ["Customize Ediff" ediff-customize t] ["List Ediff Sessions" ediff-show-registry t] ["Use separate frame for Ediff control buffer" ediff-toggle-multiframe :style toggle :selected (if (and (featurep (quote ediff-util)) (boundp (quote ediff-window-setup-function))) (eq ediff-window-setup-function (quote ediff-setup-windows-multiframe)))] ["Use a toolbar with Ediff control buffer" ediff-toggle-use-toolbar :style toggle :selected (if (featurep (quote ediff-tbar)) (ediff-use-toolbar-p))]))) (if (and (featurep (quote menubar)) (not (featurep (quote infodock))) (not (featurep (quote ediff-hook)))) (ediff-xemacs-init-menus))) (if (featurep (quote menu-bar)) (progn (defvar menu-bar-ediff-misc-menu (make-sparse-keymap "Ediff Miscellanea")) (fset (quote menu-bar-ediff-misc-menu) (symbol-value (quote menu-bar-ediff-misc-menu))) (defvar menu-bar-epatch-menu (make-sparse-keymap "Apply Patch")) (fset (quote menu-bar-epatch-menu) (symbol-value (quote menu-bar-epatch-menu))) (defvar menu-bar-ediff-merge-menu (make-sparse-keymap "Merge")) (fset (quote menu-bar-ediff-merge-menu) (symbol-value (quote menu-bar-ediff-merge-menu))) (defvar menu-bar-ediff-menu (make-sparse-keymap "Compare")) (fset (quote menu-bar-ediff-menu) (symbol-value (quote menu-bar-ediff-menu))) (define-key menu-bar-ediff-menu [window] (quote ("This Window and Next Window" . compare-windows))) (define-key menu-bar-ediff-menu [ediff-windows-linewise] (quote ("Windows Line-by-line..." . ediff-windows-linewise))) (define-key menu-bar-ediff-menu [ediff-windows-wordwise] (quote ("Windows Word-by-word..." . ediff-windows-wordwise))) (define-key menu-bar-ediff-menu [separator-ediff-windows] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-regions-linewise] (quote ("Regions Line-by-line..." . ediff-regions-linewise))) (define-key menu-bar-ediff-menu [ediff-regions-wordwise] (quote ("Regions Word-by-word..." . ediff-regions-wordwise))) (define-key menu-bar-ediff-menu [separator-ediff-regions] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-dir-revision] (quote ("Directory Revisions..." . ediff-directory-revisions))) (define-key menu-bar-ediff-menu [ediff-revision] (quote ("File with Revision..." . ediff-revision))) (define-key menu-bar-ediff-menu [separator-ediff-directories] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-directories3] (quote ("Three Directories..." . ediff-directories3))) (define-key menu-bar-ediff-menu [ediff-directories] (quote ("Two Directories..." . ediff-directories))) (define-key menu-bar-ediff-menu [separator-ediff-files] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-buffers3] (quote ("Three Buffers..." . ediff-buffers3))) (define-key menu-bar-ediff-menu [ediff-files3] (quote ("Three Files..." . ediff-files3))) (define-key menu-bar-ediff-menu [ediff-buffers] (quote ("Two Buffers..." . ediff-buffers))) (define-key menu-bar-ediff-menu [ediff-files] (quote ("Two Files..." . ediff-files))) (define-key menu-bar-ediff-merge-menu [ediff-merge-dir-revisions-with-ancestor] (quote ("Directory Revisions with Ancestor..." . ediff-merge-directory-revisions-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-dir-revisions] (quote ("Directory Revisions..." . ediff-merge-directory-revisions))) (define-key menu-bar-ediff-merge-menu [ediff-merge-revisions-with-ancestor] (quote ("Revisions with Ancestor..." . ediff-merge-revisions-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-revisions] (quote ("Revisions..." . ediff-merge-revisions))) (define-key menu-bar-ediff-merge-menu [separator-ediff-merge] (quote ("--"))) (define-key menu-bar-ediff-merge-menu [ediff-merge-directories-with-ancestor] (quote ("Directories with Ancestor..." . ediff-merge-directories-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-directories] (quote ("Directories..." . ediff-merge-directories))) (define-key menu-bar-ediff-merge-menu [separator-ediff-merge-dirs] (quote ("--"))) (define-key menu-bar-ediff-merge-menu [ediff-merge-buffers-with-ancestor] (quote ("Buffers with Ancestor..." . ediff-merge-buffers-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-buffers] (quote ("Buffers..." . ediff-merge-buffers))) (define-key menu-bar-ediff-merge-menu [ediff-merge-files-with-ancestor] (quote ("Files with Ancestor..." . ediff-merge-files-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-files] (quote ("Files..." . ediff-merge-files))) (define-key menu-bar-epatch-menu [ediff-patch-buffer] (quote ("To a Buffer..." . ediff-patch-buffer))) (define-key menu-bar-epatch-menu [ediff-patch-file] (quote ("To a File..." . ediff-patch-file))) (define-key menu-bar-ediff-misc-menu [emultiframe] (quote ("Toggle use of separate control buffer frame" . ediff-toggle-multiframe))) (define-key menu-bar-ediff-misc-menu [eregistry] (quote ("List Ediff Sessions" . ediff-show-registry))) (define-key menu-bar-ediff-misc-menu [ediff-cust] (quote ("Customize Ediff" . ediff-customize))) (define-key menu-bar-ediff-misc-menu [ediff-doc] (quote ("Ediff Manual" . ediff-documentation))))))
9054 buffer's window disappears (i.e., we use `save-window-excursion'), and
9274 Setting this variable directly does not take effect;
9284 You should not turn this mode on manually, instead use the command
9563 ;;;### (autoloads (erc-save-buffer-in-logs erc-logging-enabled) "erc-log"
9577 (autoload (quote erc-save-buffer-in-logs) "erc-log" "\
9579 If BUFFER is not provided, current buffer is used.
9582 This is normally done on exit, to save the unsaved portion of the
9586 You can save every individual message by putting this function on
9802 module, otherwise the keybindings will not do anything useful.
9817 If BUFFER is not provided, the current buffer is assumed. The deleted
9923 If you set this variable, do not also set `tags-table-list'.
9938 If you set this variable, do not also set `tags-file-name'.
9963 not the value in the buffer \\[find-tag] goes to.")
10016 but does not select the buffer.
10129 since that pops a stack of markers at which tags were found, not from
10142 to save time and avoid uninteresting warnings.
10285 The markers \"<sera>\" and \"</sera>\" themselves are not deleted.
10345 The markers \"<sera>\" and \"</sera>\" themselves are not deleted.
10391 If `ethio-java-save-lowercase' is non-nil, use [0-9a-f].
10466 (cond ((not (string-match "XEmacs" emacs-version)) (defvar eudc-tools-menu (make-sparse-keymap "Directory Search")) (fset (quote eudc-tools-menu) (symbol-value (quote eudc-tools-menu))) (define-key eudc-tools-menu [phone] (quote ("Get Phone" . eudc-get-phone))) (define-key eudc-tools-menu [email] (quote ("Get Email" . eudc-get-email))) (define-key eudc-tools-menu [separator-eudc-email] (quote ("--"))) (define-key eudc-tools-menu [expand-inline] (quote ("Expand Inline Query" . eudc-expand-inline))) (define-key eudc-tools-menu [query] (quote ("Query with Form" . eudc-query-form))) (define-key eudc-tools-menu [separator-eudc-query] (quote ("--"))) (define-key eudc-tools-menu [new] (quote ("New Server" . eudc-set-server))) (define-key eudc-tools-menu [load] (quote ("Load Hotlist of Servers" . eudc-load-eudc)))) (t (let ((menu (quote ("Directory Search" ["Load Hotlist of Servers" eudc-load-eudc t] ["New Server" eudc-set-server t] ["---" nil nil] ["Query with Form" eudc-query-form t] ["Expand Inline Query" eudc-expand-inline t] ["---" nil nil] ["Get Email" eudc-get-email t] ["Get Phone" eudc-get-phone t])))) (if (not (featurep (quote eudc-autoloads))) (if eudc-xemacs-p (if (and (featurep (quote menubar)) (not (featurep (quote infodock)))) (add-submenu (quote ("Tools")) menu)) (require (quote easymenu)) (cond ((fboundp (quote easy-menu-add-item)) (easy-menu-add-item nil (quote ("tools")) (easy-menu-create-menu (car menu) (cdr menu)))) ((fboundp (quote easy-menu-create-keymaps)) (define-key global-map [menu-bar tools eudc] (cons "Directory Search" (easy-menu-create-keymaps "Directory Search" (cdr menu)))))))))))
10551 several lines. The PRETTY-PRINTER should use `insert', and not
10603 Make file executable according to umask if not already executable.
10604 If file already has any execute bits set at all, do not change existing
10700 Regexp of comment-like directive like \"!HPF\\\\$\", not to be indented
10718 Do not left-justify line numbers (default nil).
10972 If `ffap-url-regexp' is not nil, the FILENAME may also be an URL.
11031 in each directory, not to the directory list itself.
11054 This function does not use any external programs
11057 in each directory, not to the directory list itself.
11139 PATTERN is a shell wildcard (not an Emacs regexp) and need not be quoted.
11203 If non-nil, always attempt to create the other file if it was not found.
11229 - `ff-not-found-hook'
11230 List of functions to be called if the other file could not be found.
11281 not selected. If the function definition can't be found in
11284 If the file where FUNCTION is defined is not known, then it is
11322 the point of the definition. The buffer is not selected.
11363 variable, `defface' for a face. This function does not switch to the
11743 Note that DO statements must not share a common CONTINUE.
11935 Do not add entries to this list directly; use `define-generic-mode'
11943 you do not supply it, `define-generic-mode' uses a default
12028 that take a long time, 7 - not very important messages on stuff, 9 - messages
12082 non-nil and not a positive number, Gnus will prompt the user for the
12084 As opposed to `gnus', this command will not connect to the local
12098 ARG if Gnus is not running, otherwise just pop up a Gnus frame. The
12101 omitted or the function `make-frame-on-display' is not available, the
12109 startup level. If ARG is non-nil and not a positive number, Gnus will
12120 ;;;;;; gnus-agent-rename-group gnus-agent-possibly-save-gcc gnus-agentize
12153 (autoload (quote gnus-agent-possibly-save-gcc) "gnus-agent" "\
12177 Construct list of articles that have not been downloaded.
12408 Returns whether the fetching was successful or not.
12519 otherwise, a | split, that does not allow crossposting, will be
12654 Return a list of elements of LIST1 that do not appear in LIST2.
12656 The tail of LIST1 is not copied.
12661 Return a list of elements of LIST1 that do not appear in LIST2.
12668 Return a list of elements that are in LIST1 or LIST2 but not both.
13202 the `kbd-help' property at point. If `kbd-help' does not produce
13262 If point is already in a region, then that region does not count
13264 the start of that region. If ARG is 0 and point is not in a
13265 region, print a message to that effect, but do not move point and
13266 do not run HOOK. If there are not enough regions to move over,
13268 in the error message. Point is not moved and HOOK is not run.
13280 is already in a help-echo region, then that region does not count
13282 move to the start of that region. If ARG is 0 and point is not
13284 are not enough regions to move over, an error results and the
13428 variable documentation do not get cross-referenced, unless
13490 This is not an ordinary major mode; it alters some aspects
13491 of the current mode's behavior, but not all; also, you can exit
13624 When hi-lock is started and if the mode is not excluded or patterns
13640 Setting this variable directly does not take effect;
13731 Use `hide-ifdef-set-define-alist' to save the current `hide-ifdef-env'
13736 Set to non-nil to not show #if, #ifdef, #ifndef, #else, and
13791 For some major modes, `forward-sexp' does not work properly. In those
13798 appropriate values. The regexps should not contain leading or trailing
13799 whitespace. Case does not matter.")
13847 If Highlight Changes mode is not enabled, then enable it (in either active
13859 not displayed in a different face.
13909 to save the file.
13916 \\[highlight-changes-previous-change] will not work.
13932 \\[highlight-changes-previous-change] will not work.
14002 *A list specifying which buffers not to search (if not current).
14062 Setting this variable directly does not take effect;
14140 ;;;;;; ibuffer-add-saved-filters ibuffer-delete-saved-filters ibuffer-save-filters
14144 ;;;;;; ibuffer-save-filter-groups ibuffer-yank-filter-group ibuffer-yank
14259 (autoload (quote ibuffer-save-filter-groups) "ibuf-ext" "\
14316 (autoload (quote ibuffer-save-filters) "ibuf-ext" "\
14358 Toggle whether or not sorting is in reverse order.
14373 This means that buffers whose name matches REGEXP will not be shown
14474 Mark all buffers whose associated file does not exist.
14489 Mark buffers which have not been viewed in `ibuffer-old-time' days.
14600 not a particular buffer should be displayed or not. The forms in BODY
14678 non-marking or not.
14712 Setting this variable directly does not take effect;
14774 If buffer exists but shell process is not running, start new IDL.
14907 not work). For Postscript, PDF, and HTML versions of the
14945 Setting this variable directly does not take effect;
15181 If REQUIRE-MATCH is non-nil, the user is not allowed to exit unless
15201 Switches to the buffer `*ielm*', or creates it if it does not exist.
15301 Value is the image created, or nil if images of type TYPE are not supported.
15303 Images should not be larger than specified by `max-image-size'.
15375 Image files should not be larger than specified by `max-image-size'.
15441 If a thumbnail image does not exist for a file, it is created on the
15454 used or not. If non-nil, use `display-buffer' instead of
15457 `image-dired-previous-line-and-display' where we do not want the
15555 setting this variable directly does not take effect unless
15567 enabled, setting this variable directly does not take effect unless
15588 Setting this variable directly does not take effect;
15687 called within a `save-excursion'.
15812 *What not to save on inferior Lisp's input history.
15813 Input matching this regexp is not saved on the input history in Inferior Lisp
16190 the search has not yet begun, will toggle to the last buffer
16298 ;;;;;; ispell-help ispell-pdict-save ispell-word ispell-local-dictionary-alist
16317 will need to make your changes in this variable, save, and then
16355 \"Stevens'\" does not include the quote character as part of the word.
16395 (defvar ispell-menu-map-needed (and (not ispell-menu-map) (not (featurep (quote xemacs))) (quote reload)))
16397 (if ispell-menu-map-needed (progn (setq ispell-menu-map (make-sparse-keymap "Spell")) (define-key ispell-menu-map [ispell-change-dictionary] (quote (menu-item "Change Dictionary..." ispell-change-dictionary :help "Supply explicit dictionary file name"))) (define-key ispell-menu-map [ispell-kill-ispell] (quote (menu-item "Kill Process" ispell-kill-ispell :enable (and (boundp (quote ispell-process)) ispell-process (eq (ispell-process-status) (quote run))) :help "Terminate Ispell subprocess"))) (define-key ispell-menu-map [ispell-pdict-save] (quote (menu-item "Save Dictionary" (lambda nil (interactive) (ispell-pdict-save t t)) :help "Save personal dictionary"))) (define-key ispell-menu-map [ispell-customize] (quote (menu-item "Customize..." (lambda nil (interactive) (customize-group (quote ispell))) :help "Customize spell checking options"))) (define-key ispell-menu-map [ispell-help] (quote (menu-item "Help" (lambda nil (interactive) (describe-function (quote ispell-help))) :help "Show standard Ispell keybindings and commands"))) (define-key ispell-menu-map [flyspell-mode] (quote (menu-item "Automatic spell checking (Flyspell)" flyspell-mode :help "Check spelling while you edit the text" :button (:toggle bound-and-true-p flyspell-mode)))) (define-key ispell-menu-map [ispell-complete-word] (quote (menu-item "Complete Word" ispell-complete-word :help "Complete word at cursor using dictionary"))) (define-key ispell-menu-map [ispell-complete-word-interior-frag] (quote (menu-item "Complete Word Fragment" ispell-complete-word-interior-frag :help "Complete word fragment at cursor")))))
16404 Alist expressing beginning and end of regions not to spell check.
16429 If the word is not found in dictionary, display possible corrections
16434 \(rather than preceding) is checked when the cursor is not over a word.
16456 (autoload (quote ispell-pdict-save) "ispell" "\
16544 Ispell dictionaries are not distributed with Emacs. If you are
16595 Setting this variable directly does not take effect;
16626 The argument object is not altered--the value is a copy.
16637 The argument object is not altered--the value is a copy.
16644 The argument object is not altered--the value is a copy.
16652 The argument object is not altered--the value is a copy.
16700 It is not recommended to set this variable permanently to anything but nil.")
16785 at beginning of line or at end of line. Characters not to be placed
16899 inserts previous `kmacro-counter' (but do not modify counter).
16999 if you did not use a prefix arg to ask for automatic start.
17108 Setting this variable directly does not take effect;
17129 Setting this variable directly does not take effect;
17157 (defconst ledit-save-files t "\
17158 *Non-nil means Ledit should save files before transferring to Lisp.")
17169 \\[ledit-save-defun] -- record defun at or after point
17171 \\[ledit-save-region] -- record region for later transmission to Lisp job.
17234 This should contain the \"-l\" switch, but not the \"-F\" or \"-b\" switches.")
17274 except that FILTER is not optional.
17322 `fill-column'. The soft newlines used for line wrapping will not
17512 To save a kbd macro, visit a file of Lisp code such as your `~/.emacs',
17513 use this command, and then save the file.
17801 example to see that a rule action `echo foo: bar' is a not rule
17977 Setting this variable directly does not take effect;
18019 `parens' if `angles' would need quoting and `parens' would not.")
18129 C-c C-v `message-delete-not-region' (remove the text outside the region).
18184 Reread contents of current buffer from its last auto-save file.
18295 Its body part is not interpreted at all.
18303 Optional argument NODISPLAY non-nil means buffer is not
18305 Its header part is not interpreted at all.
18315 Optional argument NODISPLAY non-nil means buffer is not
18326 Optional argument NODISPLAY non-nil means buffer is not
18354 This function does not prompt the user for any header fields, and
18414 If for some reason you are not happy with the draft, you can use
18529 Kill old buffers that have not been displayed recently.
18559 Setting this variable directly does not take effect;
18812 Setting this variable directly does not take effect;
18876 Setting this variable directly does not take effect;
18904 non-built-in ones. They correspond to Emacs coding systems, not Emacs
19116 width of ELLIPSIS. If it is non-nil and not a string, then ELLIPSIS
19148 If ALIST is not deep enough for KEYSEQ, return number which is
19152 even if ALIST is not deep enough.
19195 basis, this may not be accurate.
19209 Setting this variable directly does not take effect;
19345 to understand comments or not in the given buffer.
19353 not to go beyond `comment-fill-column'.")
19465 even for syntax in which newline does not end the comment and blank lines
19466 do not get comments. This can be changed with `comment-style'.
19501 This has no effect in modes that do not define a comment syntax.")
19533 considered to be running if the newsticker timer list is not empty.
19540 considered to be running if the newsticker timer list is not
19549 DO-NOT-COMPLAIN-IF-RUNNING is not nil.
19550 Run `newsticker-start-hook' if newsticker was not running already.
19555 Start newsticker's ticker (but not the news retrieval).
19556 Start display timer for the actual ticker if wanted and not
19603 This command does not work if you use short group names.
19715 If KEY is not a string, prompt for it with completion.
19803 nil means do not display the Octave mode startup message.
19897 - When point is not at the beginning of a headline, execute
19973 the default file. This way your current train of thought is not
19978 headline, i.e. a first line that starts with a \"*\". If not, a headline
20024 If the current buffer does not, find the first agenda file.
20071 in the diary for *today*, not at any other date. If
20076 scheduled earlier and are not yet marked DONE.
20079 long list - so this is not turned on by default.
20081 diary for *today*, not at any other date.
20135 two for subheadings, etc. Lines not starting with asterisks are body lines.
20149 \\[hide-body] make all text invisible (not headings).
20207 Setting this variable directly does not take effect;
20320 Setting this variable directly does not take effect;
20383 Setting this variable directly does not take effect;
20462 not a major rpm user/builder, please send me any corrections you find.
20597 Optional argument NOSHOW if non-nil means not to display the buffer.
20609 Optional argument NOSHOW if non-nil means not to display the buffer.
20630 Optional argument NOSHOW if non-nil means not to display the buffer.
20643 Whether or not opening a CVS directory should run PCL-CVS.
20653 The exact behavior is determined also by `cvs-dired-use-hook'." (when (stringp dir) (setq dir (directory-file-name dir)) (when (and (string= "CVS" (file-name-nondirectory dir)) (file-readable-p (expand-file-name "Entries" dir)) cvs-dired-use-hook (if (eq cvs-dired-use-hook (quote always)) (not current-prefix-arg) (equal current-prefix-arg cvs-dired-use-hook))) (save-excursion (funcall cvs-dired-action (file-name-directory dir) t t)))))
20687 Lines starting with this regular expression are not auto-indented.
20734 If optional PASSPHRASE is not specified, it will be obtained from the
20742 If optional PASSPHRASE is not specified, it will be obtained from the
20753 If optional PASSPHRASE is not specified, it will be obtained from the
20766 If optional PASSPHRASE is not specified, it will be obtained from the
20774 If optional PASSPHRASE is not specified, it will be obtained from the
20785 If optional PASSPHRASE is not specified, it will be obtained from the
20793 If the optional 3rd argument CLEARTEXT is non-nil, it does not create
20799 If optional PASSPHRASE is not specified, it will be obtained from the
20807 If the optional argument CLEARTEXT is non-nil, it does not create a
20816 If optional PASSPHRASE is not specified, it will be obtained from the
20930 Clear a rectangle and save it: \\[picture-clear-rectangle]
20945 they are not defaultly assigned to keys.
21065 save the image in a temporary file. If FILENAME is a string, save the
21084 save the image in a temporary file. If FILENAME is a string, save the
21103 save the image in a temporary file. If FILENAME is a string, save the
21124 save the image in a temporary file. If FILENAME is a string, save the
21140 argument FILENAME is treated as follows: if it's nil, save the image in a
21141 temporary file. If FILENAME is a string, save the PostScript image in a file
21155 printer. If FILENAME is a string, save the PostScript image in a file with
21169 printer. If FILENAME is a string, save the PostScript image in a file with
21185 printer. If FILENAME is a string, save the PostScript image in a file with
21249 The characters tab, linefeed, space, return and formfeed are not affected.
21264 The characters tab, linefeed, space, return and formfeed are not affected.
21271 The characters tab, linefeed, space, return and formfeed are not affected.
21311 save the image in a temporary file. If FILENAME is a string, save the
21324 send the image to the printer. If FILENAME is a string, save the PostScript
21337 send the image to the printer. If FILENAME is a string, save the PostScript
21350 send the image to the printer. If FILENAME is a string, save the PostScript
21392 nil, send the image to the printer. If OFILENAME is a string, save the
21737 it was not tested the Korean characters printing.
21821 This checks if all multi-byte characters in the region are printable or not.
21860 nil Do not print colors.
21884 send the image to the printer. If FILENAME is a string, save the PostScript
21956 send the image to the printer. If FILENAME is a string, save the PostScript
22095 module/attribute names, not variables. An abbrev table is set up
22181 FORGET-LAST-SELECTION non-nil means a selected translation is not kept
22205 Although this map is not used by Quail itself, it can be used by some
22229 If SIMPLE is non-nil, then we do not alter the meanings of
22238 Since some Quail packages depends on a physical layout of keys (not
22284 no-decode-map --- the value non-nil means that decoding map is not
22320 variable `quail-current-data'). If the cdr part is not a function,
22387 If not supplied LOOKUP is taken to be the word at point in the current
22409 If not supplied LOOKUP is taken to be the word at point in the
22462 Setting this variable directly does not take effect;
22509 Setting this variable directly does not take effect;
22545 Delete (don't save) text in the region-rectangle.
22573 Delete the region-rectangle and save it as the last killed one.
22607 The text previously in the region is not overwritten by the blanks,
22631 The length of STRING need not be the same as the rectangle width.
22644 This command does not delete or overwrite any existing text.
22765 When on, isearch searches the whole document, not only the current file.
22843 Each string should be unique in STRINGS and should not contain any regexps,
22844 quoted or not. If optional PAREN is non-nil, ensure that the returned regexp
22907 This function does not send a message; it uses the given information
22936 visible (if point is in code and it could not be made so, or if only
22975 Setting this variable directly does not take effect;
23082 variable `rmail-dont-reply-to-names', for when the user does not set
23185 If the value is neither t nor nil, RMAIL does not show MIME decoded message
23189 if the feature specified by `rmail-mime-feature' is not available
23238 If this variable is nil, or the message has not MIME specification,
23256 that file, but does not copy any new mail into the file.
23275 \\[rmail-next-message] Move to Next message whether deleted or not.
23276 \\[rmail-previous-message] Move to Previous message whether deleted or not.
23287 \\[rmail-expunge-and-save] Expunge and save the file.
23288 \\[rmail-quit] Quit Rmail: expunge, save, then switch to another buffer.
23289 \\[save-buffer] Save without expunging.
23396 ;;;### (autoloads (rmail-output-body-to-file rmail-output rmail-fields-not-to-output
23413 If the file does not exist, ask if it should be created.
23416 If the file exists and is not an Rmail file, the message is
23430 (defvar rmail-fields-not-to-output nil "\
23433 (custom-autoload (quote rmail-fields-not-to-output) "rmailout" t)
23448 The optional third argument NOATTRIBUTE, if non-nil, says not
23449 to set the `filed' attribute, and not to display a message.
23623 The text itself is not modified, only the way it is displayed is affected.
23626 is not deleted, any buffer displayed in it will become instantly encoded
23678 `not-newline', `nonl'
23696 `(not (any SET ...))'
23697 matches any character not in SET ...
23735 `(not word-boundary)'
23736 `not-word-boundary'
23737 matches the empty string, but not at the beginning or end of a
23796 `not-wordchar'
23820 `(not (syntax SYNTAX))'
23837 `not-at-end-of-line' (\\c<)
23838 `not-at-beginning-of-line' (\\c>)
23867 `(not (category CATEGORY))'
24059 Setting this variable directly does not take effect;
24152 not a valid RFC822 header or continuation line,
24189 This file need not actually exist.")
24224 in the variable `mail-citation-header', whether or not this is included
24259 This directory is used for auto-save files of mail buffers.")
24285 for the recipient, who may not know how to decode them properly.")
24332 User should not set this variable manually,
24376 These arguments should not have final newlines.
24380 Or it can be nil, if not replying to anything.
24420 Setting this variable directly does not take effect;
24535 assumed. Since filenames rarely give a clue, they are not further analyzed.
24630 When not intended, such shadowings can be the source of subtle
24632 XXX package was not distributed with versions of Emacs prior to
24642 XXX.elc in an early directory (that does not contain XXX.el) is
24700 Regexp to match shells that don't save their command history, and
24711 If BUFFER exists but shell process is not running, make new shell.
24805 Extra indentation for lines not starting a statement or substatement,
24825 or nil if they should not be changed.
24829 (as in) `abbrev-table', or nil if they should not be changed.
24884 not needed, a prompt-string or an expression for complex read functions.
24915 Note that expressions may not return t since this implies an
24936 Else, if `skeleton-pair-on-word' is non-nil or we are not before or inside a
25223 buffer in order by their sort keys. The records may or may not be
25318 If a match for KEY is not found within a record then that record is ignored.
25432 If the selected frame is not speedbar, then speedbar frame is
25450 If you do not want to change a word, just give the same word
25457 If it is not correct, ask user for the correct spelling
25876 Interpreter used comes from variable `sql-db2-program'. There is not
25997 If STROKES-MAP is not given, `strokes-global-map' will be used instead.
26004 Setting this variable directly does not take effect;
26095 `sc-cite-original' does not do any yanking of the
26111 For Emacs 19's, the region need not be active (and typically isn't
26126 Setting this variable directly does not take effect;
26292 Type M-x table-insert-row instead of \\[table-insert-row-column]. \\[table-insert-row-column] does not work
26397 must not be specified. When the optional numeric prefix argument ARG
26413 optional argument NO-COPY is internal use only and must not be
26447 Do not specify NO-RECOGNIZE and UNRECOGNIZE. They are for internal use only.
26660 ROW-DELIM-REGEXP is not specified.
26793 save it with \\[save-buffer], the contents of that buffer will be
26830 If not nil, use a smarter, Tcl-specific way to find the current
26893 If there is already a running process in that buffer, it is not restarted.
26938 `Meta' characters may not currently be sent through the terminal emulator.
26996 ;;;;;; tex-run-command tex-offer-save tex-main-file tex-first-line-header-regexp
27029 (defvar tex-offer-save t "\
27032 (custom-autoload (quote tex-offer-save) "tex-mode" t)
27058 and the input file name, with no separating space and are not shell-quoted.
27095 If two printers are not enough of a choice, you can set the variable
27331 Texinfo source buffer is not changed.
27381 commands to save keystrokes. And you can insert balanced braces with
27698 Setting this variable directly does not take effect;
27822 every time you save the file. Add this line to your .emacs file:
27823 (add-hook 'before-save-hook 'time-stamp)
27824 or customize `before-save-hook' through Custom.
27872 \(non-nil, but not a number), 0 is assumed (working on a holiday or
27873 weekend). *If not called interactively, ARG should be the number of
27946 relative only to the time worked today, and not to past time.
28028 if the program loops without waiting in any way, the timeout will not
28264 Setting this variable directly does not take effect;
28336 Do not use this to trace functions that switch buffers or do any other
28363 (defvar tramp-unified-filenames (not (featurep (quote xemacs))) "\
28369 Emacs (not XEmacs) uses a unified filename syntax for Ange-FTP and
28384 files which are not really tramp files.
28397 Emacs (not XEmacs) uses a unified filename syntax for Ange-FTP and
28420 Used for file names matching `tramp-file-name-regexp'. Operations not
28442 Falls back to normal file name handler if no tramp file name handler exists." (let ((fn (assoc operation tramp-completion-file-name-handler-alist))) (if fn (save-match-data (apply (cdr fn) args)) (tramp-completion-run-real-handler operation args))))
28448 Add tramp completion file name handler to `file-name-handler-alist'." (when (or (not (boundp (quote partial-completion-mode))) (symbol-value (quote partial-completion-mode)) (featurep (quote ido))) (add-to-list (quote file-name-handler-alist) (cons tramp-completion-file-name-regexp (quote tramp-completion-file-name-handler))) (put (quote tramp-completion-file-name-handler) (quote safe-magic) t)) (let ((jka (rassoc (quote jka-compr-handler) file-name-handler-alist))) (when jka (setq file-name-handler-alist (cons jka (delete jka file-name-handler-alist))))))
28574 Setting this variable directly does not take effect;
28592 asked whether or not really to interrupt the break.")
28664 or not to continue. A nil value for this variable prevents automatic
28728 many words per minute they usually type. This value should not be your
28849 the callback is not called).
28992 Will not make a connection if `url-gateway-unplugged' is non-nil.
29008 Setting this variable directly does not take effect;
29329 Will not do anything if `url-show-status' is nil.
29435 in which case the proposed buffer modification will not be made.
29459 If FILE-NAME is non-nil, save the result to FILE-NAME. The program
29466 If FILE-NAME is non-nil, save the result to FILE-NAME.
29472 If FILE-NAME is non-nil, save the result to FILE-NAME.
29520 `save-excursion'. If FILE is not under version control, or locked by
29529 However, before executing BODY, find FILE, and after BODY, save buffer.
29536 current buffer if BUFFER is t. If the destination buffer is not
29538 considered successful if its exit status does not exceed OKSTATUS (if
29540 means not to wait for termination of the subprocess; if it is t it means to
29563 If the file is not already registered, this registers it for version
29565 If the file is registered and not locked by anyone, this checks out
29568 first checks to see if the file has changed since checkout. If not,
29579 If the file is not already registered, this registers it for version
29581 If the file is added but not committed, it is committed.
29665 If locking is used for the files in DIR, then there must not be any
29679 This asks for confirmation if the buffer contents are not identical
29680 to that version. This function does not automatically pick up newer
29687 If the file contains no changes, and is not locked, then this simply replaces
29696 A prefix argument NOREVERT means do not revert the buffer afterwards.
29702 FILE must already be registered in BACKEND. The change is not
29704 VC's perspective on FILE, it does not register or unregister it.
29718 \(If FILE is not yet registered under NEW-BACKEND, register it.)
29736 log for the default directory, which may not be appropriate.
29834 Does not check whether the file exists but returns nil if it does not
29835 find any project directory." (let ((project-dir (getenv "PROJECTDIR")) dirs dir) (when project-dir (if (file-name-absolute-p project-dir) (setq dirs (quote ("SCCS" ""))) (setq dirs (quote ("src/SCCS" "src" "source/SCCS" "source"))) (setq project-dir (expand-file-name (concat "~" project-dir)))) (while (and (not dir) dirs) (setq dir (expand-file-name (car dirs) project-dir)) (unless (file-directory-p dir) (setq dir nil) (setq dirs (cdr dirs)))) (and dir (expand-file-name (concat "s." basename) dir)))))
29885 the keyword (i.e. first word of menu entry not in parenthesis) and
29913 Typing `TAB' after a (not completed) word looks for a VHDL keyword or a
29937 `C-c c' comments out a region if not commented out,
29992 `vhdl-inline-comment-column' and tries inline comment not to exceed
30144 | declarations) are currently not considered when displaying
30177 library directory if not existent. The Makefile also includes a target
30186 not (yet) supported.
30188 but configurations that go down several levels are not.
30189 - The \"others\" keyword in configurations is not supported.
30203 Imported setups are not automatically saved in `vhdl-project-alist' but
30219 file) for browsing the file contents (is not populated if buffer is
30234 lower case and are converted into upper case automatically (not for
30298 - Global signals declared in packages are not automatically inserted.
30316 The paper format can be set by option `ps-paper-type'. Do not forget to
30422 not supported.
30423 - Ex commands are not implemented; try ':' to get some hints.
30431 to undo twice to completely undo a change command. But this is not needed
30517 Emacs commands editing the buffer contents are not available; instead,
30530 Emacs commands editing the buffer contents are not available; instead,
30543 Emacs commands editing the buffer contents are not available; instead,
30555 Emacs commands editing the buffer contents are not available; instead,
30572 Emacs commands editing the buffer contents are not available; instead,
30589 Emacs commands editing the buffer contents are not available; instead,
30604 Toggle View mode, a minor mode for viewing text but not editing it.
30607 Emacs commands that do not change the buffer contents are available as usual.
30608 Kill commands insert text in kill buffers but do not delete. Other commands
30646 \\[point-to-register] save current position in character register.
30663 even if it was not editable before entry to View mode.
30767 additional warnings in the same buffer should not move point.
30792 if you do not attend to it promptly.
30794 :warning -- data or circumstances that are not inherently wrong,
30823 if you do not attend to it promptly.
30887 Setting this variable directly does not take effect;
30978 Setting this variable directly does not take effect;
31138 Setting this variable directly does not take effect;
31198 are not implemented
31244 C-k d save-buffers-kill-emacs
31252 C-k s save-some-buffers
31320 is not well-formed XML.
31337 Setting this variable directly does not take effect;