cxxfilt/texinfo/texinfo.tex

22 % You should have received a copy of the GNU General Public License
66 % they might have appeared in the input file name.
122 \ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
191 % For a final copy, take out the rectangles
197 % @| inserts a changebar to the left of the current line.  It should
207   % Append this vertical mode material after the current line in the output.
209     % We want to insert a rule with the height and depth of the current
308       \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
488 % defines \thisenv, so the current environment is known; @end checks
489 % whether the environment name matches.  The \checkenv macro can also be
490 % used to check whether the current environment is the one expected.
709   % if the group doesn't fit on the current page, and it's a big big
803 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
1028 % _ active, and distinguish by seeing if the current family is \slfam,
1075 % @dots{} outputs an ellipsis using the current font.
1200     \pdfdest name{#1} xyz%
1214   % of subentries (or empty, for subsubsections).  #3 is the node
1216   % corresponding node.  #4 is the page number.
1219     % Generate a link to the node text if that exists; else, use the
1221     % text in the case where a section has no node, but it doesn't
1226     \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
1273       % We use the node names as the destinations.
1286       % Latin 2 (0xea) gets translated to a | character.  Info from
1307         goto name{\pdfmkpgn{\the\pgn}}%
1372     \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
1380 % Change the current font style to #1, remembering it in \curfontstyle.
1386   \csname ten#1\endcsname  % change the current font
1389 % Select #1 fonts with the current style.
1584 % current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
1585 % \tenSTYLE to set the current font.
1755     % Change normal interword space to be same as for the current font.
2125 % For double-sided printing, put current file name in lower left corner,
2126 % chapter name on inside top of right hand pages, document
2207 % to index the item name in whatever manner is desired (perhaps none).
2468 % or in percent of \hsize, the current width of text on page.
2479 %   current hsize to be used for each column. You may use as many
2519 %   0pt means it depends on current normal line spacing.
2636       % Use the current \colcount to find the correct column width:
2685 % current baselineskip.
2934 % The name of an index should be no more than 2 characters long
2993 %  and it is "foo", the name of the index.
3259 % #1 is the index name, #2 is the entry text.
3263 % #1 is name of index, #2 is stuff to put there, #3 is subentry --
3701     % current page, no automatic page break.
3704     % If we end up splitting too much material for the current page,
3717   % the current page.  We're now back to normal single-column
3808 % Each @chapter defines this as the name of the chapter.
3819 \let\up=\raisesections % original BFox name
3823 \let\down=\lowersections % original BFox name
4153       % We don't substitute the actual chapter name into \thischapter
4167     % \donoderef, because we include the current node name in the toc
4171     % For pdftex, we have to write out the node definition (aka, make
4281     % Write the node reference (= pdf destination for pdftex).
4321 % We append the current node name (if any) and page number as additional
4323 % read this.  The node name is used in the pdf outlines as the
4466 % The first argument is the chapter or section name.
4591 \def\error{\leavevmode\lower.7ex\copy\errorbox}
4803 % @display/@smalldisplay: same as @lisp except keep current font.
5173 % @deffn category name args
5176 % @deffn category class name args
5179 % \defopon {category on}class name args
5182 % \deffngeneral {subind}category name args
5192 % @deftypefn category type name args
5195 % @deftypeop category class type name args
5198 % \deftypeopon {category on}class type name args
5201 % \deftypefngeneral {subind}category type name args
5238 % @deftp category name args
5257 % \defname, which formats the name of the @def (not the args).
5260 % #3 is the function name.
5268   % How we'll format the type name.  Putting it in brackets helps
5283   % Put the type name to the right margin.
5307     #3% output function name
5316 % tt for the name.  This is because literal text is sometimes needed in
5344 % if the fn name has parens in it, \boldbrax will not be in effect yet,
5451 \newtoks\macname    % Macro name
5541      \else \errmessage{Macro name \the\macname\space already defined}\fi
5558     % Remove the macro name from \macrolist:
5725   node \samp{\ignorespaces#1{}}}
5727 % @node's only job in TeX is to define \lastnode, which is used in
5729 \parseargdef\node{\checkenv{}\nodexxx #1,\finishnodeparse}
5731 \let\nwnode=\node
5734 % Write a cross-reference definition for the current node.  #1 is the
5752 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
5754 % 1) NAME-title - the current sectioning name taken from \thissection,
5755 %                 or the anchor name.
5784 % the node name, #2 the name of the Info cross-reference, #3 the printed
5785 % node name, #4 the name of the Info file, #5 the name of the printed
5786 % manual.  All but the node name can be omitted.
5798     % No printed node name was explicitly given.
5800       % Use the node name inside the square brackets.
5813           % Otherwise just copy the Info node name.
5827          goto file{\the\filename.pdf} name{#1}%
5830          goto name{\pdfmkpgn{#1}}%
5841     % include an _ in the xref name, etc.
5849     % If the user specified the print name (third arg) to the ref,
5857     % if the user also gave the printed manual name (fifth arg), append
5863     % node/anchor (non-float) references.
5865     % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
5867     % not find a line break at a hyphen in a node names.  Since some manuals
5868     % are best written with fairly long node names, containing hyphens, this
5869     % is a loss.  Therefore, we give the text of the node name again, so it
5875       % control sequence corresponding to the node, but it has to expand
5964 % just a \def (we prepend XR to the control sequence name to avoid
6030   % in xref tags, i.e., node names.  But since ^^e4 notation isn't
6032   % that is not enough: for node names that actually contain a ^
6059   % This is to support \ in node names and titles, since the \
6298 % But it seemed the best name for the future.
6333         % but we need to use it in a control sequence name.
6352         % node and anchor labels.  And \xrdef uses it to construct the
6497     % but we need to use it in a control sequence name.
6561 is empty.  Maybe you need to install it?  In the current directory
6837 % name cannot be active until we have parsed the command line.
6844 % \backslashcurfont outputs one backslash character in current font,
6902 % file name, in case not using a pre-dumped format.