uucp-11/uucp/texinfo.tex

93 % starts a new line in the output.
224           \line{\ewtop\hfil\ewtop}%
226           \line{%
233         \line\bgroup
251         \hfil\egroup % end of (centering) \line\bgroup
255           \line{%
261           \line{\ewbot\hfil\ewbot}%
296 % the input line (except we remove a trailing comment).  #1 should be a
491 % at the beginning of a line will start with \penalty -- and
504 % @* forces a line break.
518 % produce a whole line of output instead of starting the paragraph.
523 % to keep its height that of a normal line.  According to the rules for
537   % next line of text is done) \lineskip glue after it.  (See p.82 of
546     % We have to put a strut on the last line in case the @group is in
548     % Otherwise, the interline space between the last line of the group
549     % and the first line afterwards is too small.  But we can't put the
550     % strut in \Egroup, since there it would be on a line by itself.
551     % Hence this just inserts a strut at the beginning of each line.
554     % Since we have a strut on every line, we don't need any of TeX's
571     % @example, where each end-of-line in the input causes an
572     % end-of-line in the output.  We don't want the end-of-line after
574     % should appear on a line by itself (according to the Texinfo
584 where each line of input produces a line of output.}
607   % If the @need value is less than one line space, it's useless.
614     % normal leading is inserted relative to the preceding line.
676 % outputs text on separate line in roman font, starting at standard page margin
678 % This records the amount of indent in the innermost environment.
761 % @center line   outputs that line, centered
773 % @comment ...line which is ignored...
1117 % looks better when embedded in a line with cmr10.
1279 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1476 % and it is not used as such in any manual I can find.  We need it for
1624 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1628 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1634 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1638   \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1675 \global\evenheadline={\line{\folio\hfil\thistitle}}
1676 \global\oddheadline={\line{\thischapter\hfil\folio}}
1687 \global\evenheadline={\line{\thischapter\hfil\folio}}
1688 \global\oddheadline={\line{\thischapter\hfil\folio}}
1698 \global\evenheadline={\line{\folio\hfil\thistitle}}
1699 \global\oddheadline={\line{\thischapter\hfil\folio}}
1707 \global\evenheadline={\line{\thischapter\hfil\folio}}
1708 \global\oddheadline={\line{\thischapter\hfil\folio}}
1727 % @settitle line...  specifies the title of the document, for headings.
1778   % If the item text does not fit in the space we have, put it on a line
1780   % line.  We do not start a paragraph here because then if the next
1782   % horizontal list on a line by itself, resulting in extra blank space.
1806     % following text (if any) will end up on the same line.
2029 % can be specified either with sample text given in a template line,
2050 % For those who want to use more than one line's worth of words in
2051 % the preamble, break the line within one argument and it
2060 % Each new table line starts with @item, each subsequent new column
2087 % @multitableparindent is paragraph indent in table.
2091 %   0pt means it depends on current normal line spacing.
2149 % This used to have \hskip1sp.  But then the space in a template line is
2174   % each line. Every column entry will cause \colcount to advance by one.
2176   % looks at the current \colcount to find the correct column width.
2187   % \vtop will set a single line and will also let text wrap and
2219   % blank line, when TeX decides to break the line at the space before the
2220   % box from the multistrut, so the strut ends up on a line by itself.
2355 % Ignore text until a line `@end #1'.
2376   % Make the letter c a comment character so that the rest of the line
2413 % uncomment the following line:
2469     % Do minimal line-breaking.
2484 % own to delimit the rest of the line, and then take it out again if we
2618 % \fooindex ...rest of line... puts an entry in the index foo.
3002   % as its first line, TeX doesn't complain about mismatched braces
3072   % Do not fill out the last line with white space.
3078   % Do not prefer a separate line ending with a hyphen to fewer lines.
3082   % don't both fit on one line.  In that case, bob suggests starting the
3083   % dots pretty far over on the line.  Unfortunately, a large
3091   % When the entry text needs to be broken, just fill out the first line
3098   % Start a ``paragraph'' for the index entry so the line breaking
3102   % Insert the text of the index entry.  TeX will do line-breaking on it.
3104   % The following is kludged to not output a line of dots in the index if
3113     % If we must, put the page number on a line of its own, and fill out
3114     % this line with blank space.  (The \hfil is overwhelmed with the
3135 \def\primary #1{\line{#1\hfil}}
3185   % First we halve the line length, less a little for the gutter between
3186   % the columns.  We compute the gutter based on the line length, so it
3637 %       1) We use \vbox rather than the earlier \line to permit
3851       \advance\hsize by -\contentsrightmargin % Don't use the full line length.
3999 % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
4104 % Define @lisp ... @endlisp.
4105 % @lisp does a \begingroup so it can rebind things,
4108 % Amount to narrow the margins by for @lisp.
4111 % This is the definition that ^^M gets inside @lisp, @example, and other
4117 % space in the output.  Don't allow a line break at this space, as this
4118 % is used only in environments like @example, where each line of input
4119 % should produce a line of output anyway.
4143 % \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins.
4178         % Flag to tell @lisp, etc., not to narrow margin.
4216   \obeylines % each line of input is a line of output
4241 % @lisp: indented, narrowed, typewriter font.
4242 \def\lisp{\begingroup
4250 % @example: Same as @lisp.
4251 \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4262 \def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
4264 \def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
4272   \lisp
4275 % @display: same as @lisp except keep current font.
4380   % Respect line breaks,
4412   % Respect line breaks,
4564 % First, defname, which formats the header line itself.
4575 \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
4717 % way, TeX won't find exactly `{...}' as an undelimited argument, and
4794 % Do complete processing of one @defun or @defunx line already parsed.
5320 % line.  Whatever was read is then fed to the next control sequence
5448   % not find a line break at a hyphen in a node names.  Since some manuals
5535 % Use TeX 3.0's \inputlineno to get the line number, for better error
5612   % character, we would end up writing a line like this: 'xrdef {'hat
5727   % Don't crash into the line above the footnote text.  Since this
5759 % @| inserts a changebar to the left of the current line.  It should
5769   % Append this vertical mode material after the current line in the output.
5910 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
5912 % stretch added to depend on the line length, hence the dependence on
6112 % name cannot be active until we have parsed the command line.