emacs/man/texinfo.tex

50 %   dvips foo.dvi -o  # or whatever; this makes foo.ps.
277 \newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
620 % latex.ltx, since we use a different font for the raised A; it's most
621 % convenient for us to use an explicitly smaller font, rather than using
622 % the \scriptstyle font (since we don't reset \scriptstyle and
645 % @: forces normal size whitespace following.
728   % \dimen0 is the vertical size of the group's box.
796     % Back up by the size of the box, whether we did a page break or not.
813 % outputs text on separate line in roman font, starting at standard page margin
840     % make the vbox yourself of the appropriate size.
1098 % @dots{} outputs an ellipsis using the current font.
1508 % Change the current font style to #1, remembering it in \curfontstyle.
1509 % For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
1514   \csname ten#1\endcsname  % change the current font
1527 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
1533 % We don't need math for this font style.
1540 % Set the baselineskip to #1, and the lineskip and strut size
1817 % Set the font macro #1 to the font named #2, adding on the
1818 % specified font prefix (normally `cm').
1819 % #3 is the font's design size, #4 is a scale factor, #5 is the CMap
1823   \font#1=\fontprefix#2#3 scaled #4
1830 % Use cm as the default font prefix.
1831 % To specify the font prefix, you must define \fontprefix
1836 % Support font families that don't use the same naming scheme as CM.
1853 % Definitions for a main text size of 11pt.  This is the default in
1868 \font\texti=cmmi10 scaled \mainmagstep
1869 \font\textsy=cmsy10 scaled \mainmagstep
1887 \font\smalli=cmmi9
1888 \font\smallsy=cmsy9
1900 \font\smalleri=cmmi8
1901 \font\smallersy=cmsy8
1913 \font\titlei=cmmi12 scaled \magstep3
1914 \font\titlesy=cmsy10 scaled \magstep4
1928 \font\chapi=cmmi12 scaled \magstep2
1929 \font\chapsy=cmsy10 scaled \magstep3
1941 \font\seci=cmmi12 scaled \magstep1
1942 \font\secsy=cmsy10 scaled \magstep2
1954 \font\sseci=cmmi12 scaled \magstephalf
1955 \font\ssecsy=cmsy10 scaled 1315
1967 \font\reducedi=cmmi10
1968 \font\reducedsy=cmsy10
1973 } % end of 11pt text font size definitions
1993 \font\texti=cmmi10 scaled \mainmagstep
1994 \font\textsy=cmsy10 scaled \mainmagstep
2012 \font\smalli=cmmi9
2013 \font\smallsy=cmsy9
2025 \font\smalleri=cmmi8
2026 \font\smallersy=cmsy8
2038 \font\titlei=cmmi12 scaled \magstep3
2039 \font\titlesy=cmsy10 scaled \magstep4
2053 \font\chapi=cmmi12 scaled \magstep1
2054 \font\chapsy=cmsy10 scaled \magstep2
2066 \font\seci=cmmi12
2067 \font\secsy=cmsy10 scaled \magstep1
2079 \font\sseci=cmmi10
2080 \font\ssecsy=cmsy10
2092 \font\reducedi=cmmi9
2093 \font\reducedsy=cmsy9
2101 } % end of 10pt text font size definitions
2106 % (or 11) to redefine the text font size.  pt is assumed.
2129 % In order for the font changes to affect most math symbols and letters,
2141 % The font-changing commands redefine the meanings of \tenSTYLE, instead
2144 % \tenSTYLE to set the current font.
2146 % Each font-changing command also sets the names \lsize (one size lower)
2245 % Count depth in font-changes, for error checks
2254 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
2289 \def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
2290 \def\restorehyphenation{\hyphenchar\font = `- }
2316 \font\keysy=cmsy9
2333 % which makes spaces the same size as normal in the surrounding text.
2336     % Change normal interword space to be same as for the current font.
2337     \spaceskip = \fontdimen2\font
2424 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
2426 %   or `code' (@kbd uses normal tty font always).
2507 % Check if we are currently using a typewriter font.  Since all the
2510 % this property, we can check that font parameter.
2512 \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
2521 % @l was never documented to mean ``switch to the Lisp font'',
2526 % Explicit font changes: @r, @sc, undocumented @ii.
2527 \def\r#1{{\rm #1}}              % roman font
2528 \def\sc#1{{\smallcaps#1}}       % smallcaps font
2529 \def\ii#1{{\it #1}}             % italic font
2532 % We print this one point size smaller, since it's intended for
2545 % No font change, but don't do end-of-sentence spacing.
2556 % @pounds{} is a sterling sign, which Knuth put in the CM italic font.
2560 % @euro{} comes from a separate font, depending on the current style.
2568 % font height.
2585   % We set the font at each command, rather than predefining it in
2586   % \textfonts and the other font-switching commands, so that
2588   % font installed.
2590   % There is only one designed size (nominal 10pt), so we always scale
2591   % that to the current nominal size.
2600     \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
2603     \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
2608 % @registeredsymbol - R in a circle.  The font for the R should really
3816   % Although these internal commands shouldn't show up, sometimes they do.
3884   % Texinfo font commands.
3934   % Likewise with the other plain tex font commands.
4037   % Process the index entry with all font commands turned off, to
4045   % the original text, including any font commands.  We write
4217   % Some minor font changes for the special characters.
4387   % Change the page size parameters.  We could do this once outside this
5030 % Print any size, any type, section title.
5299 % Need the word Appendix, and a fixed-size box.
5497 \font\circle=lcircle10
5579 % If you want even small examples the full size: @set dispenvsize nosmall.
5619 % @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
5630 % @display/@smalldisplay: same as @lisp except keep current font.
5726 % Disable Spanish ligatures ?` and !` of \tt font
5740   \tt  % easiest (and conventionally used) font for verbatim
5810   % Easiest (and conventionally used) font for verbatim
5885 % typesetting commands (@smallbook, font changes, etc.) have to be done
5918     % header.  But if there's nothing but headers, we need to allow a
5979     \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
6149   \df \sl \hyphenchar\font=0
6155   \sl\hyphenchar\font=45
6191     % otherwise use the default font.
7155     % \epsfbox itself resets \epsf?size at each figure.
7510 % the default font encoding (OT1).
8277 % \hsize.  We call this whenever the paper size is set.
8337 % Use @smallbook to reset parameters for 7x9.25 trim size.
8354 % Use @smallerbook to reset parameters for 6x9 trim size.
8489 \def\normaldollar{$}%$ font-lock fix
8498 % typewriter fonts to have this, we can check that font parameter.
8500 \def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
8502 % Same as above, but check for italic font.  Actually this also catches
8506 \def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
8510 % Most of these we simply print from the \tt font, but for some, we can
8539 \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
8556 % \backslashcurfont outputs one backslash character in current font,
8566 % in fixed width font.
8591   @let$=@normaldollar %$ font-lock fix