Lines Matching +defs:scroll +defs:other +defs:window
93 Going from body to spec with `ff-find-other-file' used these
133 Switch to other file (Body <-> Spec) '\\[ff-find-other-file]'
134 or '\\[ff-mouse-find-other-file]
135 Switch to other file in other window '\\[ada-ff-other-window]'
136 or '\\[ff-mouse-find-other-file-other-window]
175 ;;;;;; change-log-mode add-change-log-entry-other-window add-change-log-entry
234 Third arg OTHER-WINDOW non-nil means visit in other window.
253 (autoload (quote add-change-log-entry-other-window) "add-log" "\
254 Find change log file in other window and add entry and item.
256 the change log file in another window.
259 (define-key ctl-x-4-map "a" 'add-change-log-entry-other-window)
264 New log entries are usually made with \\[add-change-log-entry] or \\[add-change-log-entry-other-window].
328 it additionally prints a warning message. All other values will be
338 advised function is compiled or a built-in function. Every other value will
431 to this particular single advice. No other advice information will be saved.
597 and many other features.
702 forgetting which passphrase was used, and other practical
876 in the current window.
882 Strings will be separated from each other by SPACE lines.
962 ;;;;;; appt-msg-window appt-visible appt-audible appt-message-warning-time
985 This variable is only relevant if `appt-msg-window' is nil.")
989 (defvar appt-msg-window t "\
990 *Non-nil means display appointment message in another window.
993 (custom-autoload (quote appt-msg-window) "appt" t)
997 This is in addition to any other display of appointment messages.")
1003 Only relevant if reminders are to be displayed in their own window.")
1559 or if CONDITION had no actions, after all other CONDITIONs.
1659 Use `auto-revert-mode' for changes other than appends!
1710 modes. Positive numbers and symbols other than the above are treated
1958 Detour: the ray is deflected and emerges somewhere other than
1961 ray went in, and the other where it came out.
2148 there are one or more other bookmarks with the same name, they will
2241 function is passed the URL and any other args of `browse-url'. The last
2315 When called interactively, if variable `browse-url-new-window-flag' is
2316 non-nil, load the document in a new window, if possible, otherwise use
2318 the effect of `browse-url-new-window-flag'.
2321 used instead of `browse-url-new-window-flag'.
2334 When called interactively, if variable `browse-url-new-window-flag' is
2335 non-nil, load the document in a new Netscape window, otherwise use a
2337 the effect of `browse-url-new-window-flag'.
2339 If `browse-url-netscape-new-window-is-tab' is non-nil, then
2340 whenever a document would otherwise be loaded in a new window, it
2341 is loaded in a new tab in an existing window instead.
2344 used instead of `browse-url-new-window-flag'.
2353 When called interactively, if variable `browse-url-new-window-flag' is
2354 non-nil, load the document in a new Mozilla window, otherwise use a
2356 the effect of `browse-url-new-window-flag'.
2358 If `browse-url-mozilla-new-window-is-tab' is non-nil, then whenever a
2359 document would otherwise be loaded in a new window, it is loaded in a
2360 new tab in an existing window instead.
2363 used instead of `browse-url-new-window-flag'.
2374 `browse-url-new-window-flag' is non-nil, load the document in a
2375 new Firefox window, otherwise use a random existing one. A
2377 `browse-url-new-window-flag'.
2379 If `browse-url-firefox-new-window-is-tab' is non-nil, then
2380 whenever a document would otherwise be loaded in a new window, it
2381 is loaded in a new tab in an existing window instead.
2384 NEW-WINDOW is used instead of `browse-url-new-window-flag'.
2386 On MS-Windows systems the optional `new-window' parameter is
2389 `browse-url-new-window-flag' and `browse-url-firefox-new-window-is-tab'
2391 URL in a new window.
2400 When called interactively, if variable `browse-url-new-window-flag' is
2401 non-nil, load the document in a new Galeon window, otherwise use a
2403 the effect of `browse-url-new-window-flag'.
2405 If `browse-url-galeon-new-window-is-tab' is non-nil, then whenever a
2406 document would otherwise be loaded in a new window, it is loaded in a
2407 new tab in an existing window instead.
2410 used instead of `browse-url-new-window-flag'.
2419 When called interactively, if variable `browse-url-new-window-flag' is
2420 non-nil, load the document in a new browser window, otherwise use an
2422 effect of `browse-url-new-window-flag'.
2425 used instead of `browse-url-new-window-flag'.
2437 When called interactively, if variable `browse-url-new-window-flag' is
2438 non-nil, load the document in a new Mosaic window, otherwise use a
2440 the effect of `browse-url-new-window-flag'.
2443 used instead of `browse-url-new-window-flag'.
2462 When called interactively, if variable `browse-url-new-window-flag' is
2463 non-nil, load the document in a new browser window, otherwise use a
2465 the effect of `browse-url-new-window-flag'.
2468 used instead of `browse-url-new-window-flag'.
2482 When called interactively, if variable `browse-url-new-window-flag' is
2483 non-nil, load the document in a new window. A non-nil interactive
2484 prefix argument reverses the effect of `browse-url-new-window-flag'.
2487 used instead of `browse-url-new-window-flag'.
2501 in an Xterm window using the Xterm program named by `browse-url-xterm-program'
2511 When called interactively, if variable `browse-url-new-window-flag' is
2512 non-nil, load the document in a new lynx in a new term window,
2514 reverses the effect of `browse-url-new-window-flag'.
2517 used instead of `browse-url-new-window-flag'.
2531 will cause the mail to be composed in another window rather than the
2534 When called interactively, if variable `browse-url-new-window-flag' is
2535 non-nil use `compose-mail-other-window', otherwise `compose-mail'. A
2537 `browse-url-new-window-flag'.
2540 used instead of `browse-url-new-window-flag'.
2653 button-type from which to inherit other properties; see
2665 button-type from which to inherit other properties; see
2677 button-type from which to inherit other properties; see
2694 button-type from which to inherit other properties; see
2836 When called interactively from the calendar window, the date of death is taken
2867 Invoke the Calculator and give it a full-sized window.
2885 This is most useful in the X window system.
2941 ;;;;;; hebrew-holidays other-holidays local-holidays oriental-holidays
2950 ;;;;;; today-visible-calendar-hook initial-calendar-window-hook
2960 The offset of the principal month from the center of the calendar window.
2969 The diary is displayed in another window when the calendar is first displayed,
2977 Non-nil means mark dates with diary entries, in the calendar window.
2990 The holidays are displayed in another window when the calendar is first
2996 Non-nil means mark dates of holidays in the calendar window.
3042 (defvar initial-calendar-window-hook nil "\
3043 List of functions to be called when the calendar window is first opened.
3044 The functions invoked are called after the calendar window is opened, but
3048 (custom-autoload (quote initial-calendar-window-hook) "calendar" t)
3061 date is not visible in the window.
3074 date is visible in the window.
3136 window but will appear in a diary window.
3158 diary window; only the continuation lines is shown. For example, the
3169 will appear in the diary window without the date line at the beginning. This
3170 facility allows the diary window to look neater, but can cause confusion if
3195 Diary files can contain directives to include the contents of other files; for
3222 See the documentation for the function `include-other-diary-files'.")
3300 A function `include-other-diary-files' is provided for use as the value of
3308 obeyed. You can change the \"#include\" to some other string by changing
3309 the variable `diary-include-string'. When you use `include-other-diary-files'
3316 '(include-other-diary-files sort-diary-entries))
3374 obeyed. You can change the \"#include\" to some other string by changing the
3377 function `include-other-diary-files' as part of `list-diary-entries-hook'.")
3430 (put (quote other-holidays) (quote risky-local-variable) t)
3432 (defvar other-holidays nil "\
3436 (custom-autoload (quote other-holidays) "calendar" t)
3501 any other value the current frame is used. Using any of the first
4100 checkdoc status window instead of the usual behavior.
4111 checkdoc status window instead of the usual behavior.
4405 (add-hook 'same-window-buffer-names "*scheme*")
4536 (defvar comint-output-filter-functions (quote (comint-postoutput-scroll-to-bottom comint-watch-for-password-prompt)) "\
4538 One possible function is `comint-postoutput-scroll-to-bottom'.
4541 `comint-last-output-start' and the buffer's `process-mark', if other filter
4629 Compare text in current window with text in next window.
4630 Compares the text starting at point in each window,
4633 This command pushes the mark in each window
4634 at the prior location of point in that window.
4637 first in the other window, then in the selected window.
4662 ;;;;;; compilation-ask-about-save compilation-window-height compilation-mode-hook)
4671 (defvar compilation-window-height nil "\
4672 *Number of lines in a compilation window. If nil, use Emacs default.")
4674 (custom-autoload (quote compilation-window-height) "compile" t)
4681 is called with variables `compilation-buffer' and `compilation-window'
4682 bound to the compilation buffer and window, respectively.")
4755 the `*compilation*' buffer to some other name with
4848 For example, M-x p-c-m expands to M-x partial-completion-mode since no other
4851 other file in that directory begins with that sequence of characters.
4946 stacking depending on ascent, descent and other properties.
5474 An open brace following other text is treated as if it the line started
5669 ;;;;;; custom-save-all custom-file customize-browse custom-buffer-create-other-window
5672 ;;;;;; customize-rogue customize-unsaved customize-face-other-window
5673 ;;;;;; customize-face customize-changed-options customize-option-other-window
5674 ;;;;;; customize-option customize-group-other-window customize-group
5695 (add-hook 'same-window-regexps "\\`\\*Customiz.*\\*\\'")
5764 (autoload (quote customize-group-other-window) "cus-edit" "\
5776 (defalias (quote customize-variable-other-window) (quote customize-option-other-window))
5778 (autoload (quote customize-option-other-window) "cus-edit" "\
5780 Show the buffer in another window, but don't select it.
5838 (autoload (quote customize-face-other-window) "cus-edit" "\
5839 Show customization buffer for face FACE in other window.
5899 (autoload (quote custom-buffer-create-other-window) "cus-edit" "\
5900 Create a buffer containing OPTIONS, and display it in another window.
5901 The result includes selecting that window.
6023 Reset the specs in THEME of some faces to their specs in other themes.
6238 make it possible to define other places to indent.
6273 other labels, CALL, GOTO and GOSUB statements.
6331 any other args you like. In that case, the list of args after the
6462 `delphi-other-face' (default nil)
6838 Generate the diary window for ARG days starting with the current date.
6945 ;;;### (autoloads (dired-mode dired-noselect dired-other-frame dired-other-window
6954 May contain all other options that don't contradict `-l';
7020 This means: if there is a dired buffer displayed in the next window,
7056 (define-key ctl-x-4-map "d" 'dired-other-window)
7058 (autoload (quote dired-other-window) "dired" "\
7059 \"Edit\" directory DIRNAME. Like `dired' but selects in another window.
7062 (define-key ctl-x-5-map "d" 'dired-other-frame)
7064 (autoload (quote dired-other-frame) "dired" "\
7099 Type \\[dired-find-file-other-window] to find file or dired directory in Other window.
7672 Describe the display table in use in the selected window and buffer.
7906 keywords and values). These following keyword arguments are supported (other
8390 ;;;;;; ebrowse-tags-complete-symbol ebrowse-tags-find-definition-other-frame
8391 ;;;;;; ebrowse-tags-view-definition-other-frame ebrowse-tags-find-declaration-other-frame
8392 ;;;;;; ebrowse-tags-find-definition-other-window ebrowse-tags-view-definition-other-window
8393 ;;;;;; ebrowse-tags-find-declaration-other-window ebrowse-tags-find-definition
8444 (autoload (quote ebrowse-tags-find-declaration-other-window) "ebrowse" "\
8445 Find declaration of member at point in other window.
8449 (autoload (quote ebrowse-tags-view-definition-other-window) "ebrowse" "\
8450 View definition of member at point in other window.
8454 (autoload (quote ebrowse-tags-find-definition-other-window) "ebrowse" "\
8455 Find definition of member at point in other window.
8459 (autoload (quote ebrowse-tags-find-declaration-other-frame) "ebrowse" "\
8460 Find definition of member at point in other frame.
8464 (autoload (quote ebrowse-tags-view-definition-other-frame) "ebrowse" "\
8465 View definition of member at point in other frame.
8469 (autoload (quote ebrowse-tags-find-definition-other-frame) "ebrowse" "\
8470 Find definition of member at point in other frame.
8558 window disappears. Otherwise, one may move around in the buffer list
8559 window, marking buffers to be selected, saved or deleted.
8562 the appropriate line of the buffer-list window. Other commands are
8635 expression even if the variable already has some other value.
8770 If WIND-A is nil, use selected window.
8771 If WIND-B is nil, use window next to WIND-A.
8779 If WIND-A is nil, use selected window.
8780 If WIND-B is nil, use window next to WIND-A.
8910 (defvar ediff-window-setup-function)
8915 (ediff-cond-compile-for-xemacs-or-emacs (progn (defvar ediff-menu (quote ("Compare" ["Two Files..." ediff-files t] ["Two Buffers..." ediff-buffers t] ["Three Files..." ediff-files3 t] ["Three Buffers..." ediff-buffers3 t] "---" ["Two Directories..." ediff-directories t] ["Three Directories..." ediff-directories3 t] "---" ["File with Revision..." ediff-revision t] ["Directory Revisions..." ediff-directory-revisions t] "---" ["Windows Word-by-word..." ediff-windows-wordwise t] ["Windows Line-by-line..." ediff-windows-linewise t] "---" ["Regions Word-by-word..." ediff-regions-wordwise t] ["Regions Line-by-line..." ediff-regions-linewise t]))) (defvar ediff-merge-menu (quote ("Merge" ["Files..." ediff-merge-files t] ["Files with Ancestor..." ediff-merge-files-with-ancestor t] ["Buffers..." ediff-merge-buffers t] ["Buffers with Ancestor..." ediff-merge-buffers-with-ancestor t] "---" ["Directories..." ediff-merge-directories t] ["Directories with Ancestor..." ediff-merge-directories-with-ancestor t] "---" ["Revisions..." ediff-merge-revisions t] ["Revisions with Ancestor..." ediff-merge-revisions-with-ancestor t] ["Directory Revisions..." ediff-merge-directory-revisions t] ["Directory Revisions with Ancestor..." ediff-merge-directory-revisions-with-ancestor t]))) (defvar epatch-menu (quote ("Apply Patch" ["To a file..." ediff-patch-file t] ["To a buffer..." ediff-patch-buffer t]))) (defvar ediff-misc-menu (quote ("Ediff Miscellanea" ["Ediff Manual" ediff-documentation t] ["Customize Ediff" ediff-customize t] ["List Ediff Sessions" ediff-show-registry t] ["Use separate frame for Ediff control buffer" ediff-toggle-multiframe :style toggle :selected (if (and (featurep (quote ediff-util)) (boundp (quote ediff-window-setup-function))) (eq ediff-window-setup-function (quote ediff-setup-windows-multiframe)))] ["Use a toolbar with Ediff control buffer" ediff-toggle-use-toolbar :style toggle :selected (if (featurep (quote ediff-tbar)) (ediff-use-toolbar-p))]))) (if (and (featurep (quote menubar)) (not (featurep (quote infodock))) (not (featurep (quote ediff-hook)))) (ediff-xemacs-init-menus))) (if (featurep (quote menu-bar)) (progn (defvar menu-bar-ediff-misc-menu (make-sparse-keymap "Ediff Miscellanea")) (fset (quote menu-bar-ediff-misc-menu) (symbol-value (quote menu-bar-ediff-misc-menu))) (defvar menu-bar-epatch-menu (make-sparse-keymap "Apply Patch")) (fset (quote menu-bar-epatch-menu) (symbol-value (quote menu-bar-epatch-menu))) (defvar menu-bar-ediff-merge-menu (make-sparse-keymap "Merge")) (fset (quote menu-bar-ediff-merge-menu) (symbol-value (quote menu-bar-ediff-merge-menu))) (defvar menu-bar-ediff-menu (make-sparse-keymap "Compare")) (fset (quote menu-bar-ediff-menu) (symbol-value (quote menu-bar-ediff-menu))) (define-key menu-bar-ediff-menu [window] (quote ("This Window and Next Window" . compare-windows))) (define-key menu-bar-ediff-menu [ediff-windows-linewise] (quote ("Windows Line-by-line..." . ediff-windows-linewise))) (define-key menu-bar-ediff-menu [ediff-windows-wordwise] (quote ("Windows Word-by-word..." . ediff-windows-wordwise))) (define-key menu-bar-ediff-menu [separator-ediff-windows] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-regions-linewise] (quote ("Regions Line-by-line..." . ediff-regions-linewise))) (define-key menu-bar-ediff-menu [ediff-regions-wordwise] (quote ("Regions Word-by-word..." . ediff-regions-wordwise))) (define-key menu-bar-ediff-menu [separator-ediff-regions] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-dir-revision] (quote ("Directory Revisions..." . ediff-directory-revisions))) (define-key menu-bar-ediff-menu [ediff-revision] (quote ("File with Revision..." . ediff-revision))) (define-key menu-bar-ediff-menu [separator-ediff-directories] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-directories3] (quote ("Three Directories..." . ediff-directories3))) (define-key menu-bar-ediff-menu [ediff-directories] (quote ("Two Directories..." . ediff-directories))) (define-key menu-bar-ediff-menu [separator-ediff-files] (quote ("--"))) (define-key menu-bar-ediff-menu [ediff-buffers3] (quote ("Three Buffers..." . ediff-buffers3))) (define-key menu-bar-ediff-menu [ediff-files3] (quote ("Three Files..." . ediff-files3))) (define-key menu-bar-ediff-menu [ediff-buffers] (quote ("Two Buffers..." . ediff-buffers))) (define-key menu-bar-ediff-menu [ediff-files] (quote ("Two Files..." . ediff-files))) (define-key menu-bar-ediff-merge-menu [ediff-merge-dir-revisions-with-ancestor] (quote ("Directory Revisions with Ancestor..." . ediff-merge-directory-revisions-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-dir-revisions] (quote ("Directory Revisions..." . ediff-merge-directory-revisions))) (define-key menu-bar-ediff-merge-menu [ediff-merge-revisions-with-ancestor] (quote ("Revisions with Ancestor..." . ediff-merge-revisions-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-revisions] (quote ("Revisions..." . ediff-merge-revisions))) (define-key menu-bar-ediff-merge-menu [separator-ediff-merge] (quote ("--"))) (define-key menu-bar-ediff-merge-menu [ediff-merge-directories-with-ancestor] (quote ("Directories with Ancestor..." . ediff-merge-directories-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-directories] (quote ("Directories..." . ediff-merge-directories))) (define-key menu-bar-ediff-merge-menu [separator-ediff-merge-dirs] (quote ("--"))) (define-key menu-bar-ediff-merge-menu [ediff-merge-buffers-with-ancestor] (quote ("Buffers with Ancestor..." . ediff-merge-buffers-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-buffers] (quote ("Buffers..." . ediff-merge-buffers))) (define-key menu-bar-ediff-merge-menu [ediff-merge-files-with-ancestor] (quote ("Files with Ancestor..." . ediff-merge-files-with-ancestor))) (define-key menu-bar-ediff-merge-menu [ediff-merge-files] (quote ("Files..." . ediff-merge-files))) (define-key menu-bar-epatch-menu [ediff-patch-buffer] (quote ("To a Buffer..." . ediff-patch-buffer))) (define-key menu-bar-epatch-menu [ediff-patch-file] (quote ("To a File..." . ediff-patch-file))) (define-key menu-bar-ediff-misc-menu [emultiframe] (quote ("Toggle use of separate control buffer frame" . ediff-toggle-multiframe))) (define-key menu-bar-ediff-misc-menu [eregistry] (quote ("List Ediff Sessions" . ediff-show-registry))) (define-key menu-bar-ediff-misc-menu [ediff-cust] (quote ("Customize Ediff" . ediff-customize))) (define-key menu-bar-ediff-misc-menu [ediff-doc] (quote ("Ediff Manual" . ediff-documentation))))))
8940 To change the default, set the variable `ediff-window-setup-function',
9010 ;;;### (autoloads (edt-emulation-on edt-set-scroll-margins) "edt"
9014 (autoload (quote edt-set-scroll-margins) "edt" "\
9015 Set scroll margins.
9016 Argument TOP is the top margin in number of lines or percent of window.
9017 Argument BOTTOM is the bottom margin in number of lines or percent of window.
9042 shrink the window to fit. If THUNK returns non-nil, we don't do those things.
9044 After THUNK has been called, this function \"electrically\" pops up a window
9045 in which BUFFER is displayed and allows the user to scroll through that buffer
9046 in `electric-help-mode'. The window's height will be at least MINHEIGHT if
9050 shrink the window to fit if `electric-help-shrink-window' is non-nil.
9054 buffer's window disappears (i.e., we use `save-window-excursion'), and
9101 This variable is expected to be made buffer-local by modes (other than
9357 be invoked for the values of the other parameters.
9912 ;;;;;; pop-tag-mark find-tag-regexp find-tag-other-frame find-tag-other-window
9930 Any other value means use the setting of `case-fold-search'.")
9955 Any other value means ask the user whether to add a new tags table
10057 (autoload (quote find-tag-other-window) "etags" "\
10059 Select the buffer containing the tag's definition in another window, and
10078 (define-key ctl-x-4-map "." 'find-tag-other-window)
10080 (autoload (quote find-tag-other-frame) "etags" "\
10101 (define-key ctl-x-5-map "." 'find-tag-other-frame)
10113 If third arg OTHER-WINDOW is non-nil, select the buffer in another window.
10633 member of the list, but you can visit the other specified positions
10789 the list of faces to be used. For any other value of FACE,
10834 symbol's name. Any other symbol is considered the name of a face.
11121 On other systems, the closest you can come is to use `-l'.")
11159 ;;;### (autoloads (ff-mouse-find-other-file-other-window ff-mouse-find-other-file
11160 ;;;;;; ff-find-other-file ff-get-other-file) "find-file" "find-file.el"
11172 (autoload (quote ff-get-other-file) "find-file" "\
11174 See also the documentation for `ff-find-other-file'.
11176 If optional IN-OTHER-WINDOW is non-nil, find the file in another window.
11180 (defalias (quote ff-find-related-file) (quote ff-find-other-file))
11182 (autoload (quote ff-find-other-file) "find-file" "\
11186 If optional IN-OTHER-WINDOW is non-nil, find the file in the other window.
11195 - `ff-always-in-other-window'
11196 If non-nil, always open the other file in another window, unless an
11197 argument is given to `ff-find-other-file'.
11203 If non-nil, always attempt to create the other file if it was not found.
11213 - `ff-other-file-alist'
11218 `ff-other-file-alist' that matches this file's extension.
11224 List of functions to be called before the other file is loaded.
11227 List of functions to be called after the other file is loaded.
11230 List of functions to be called if the other file could not be found.
11233 List of functions to be called if the other file has been created.
11237 (autoload (quote ff-mouse-find-other-file) "find-file" "\
11242 (autoload (quote ff-mouse-find-other-file-other-window) "find-file" "\
11243 Visit the file you click on in another window.
11252 ;;;;;; find-definition-noselect find-variable-other-frame find-variable-other-window
11253 ;;;;;; find-variable find-variable-noselect find-function-other-frame
11254 ;;;;;; find-function-other-window find-function find-function-noselect
11304 (autoload (quote find-function-other-window) "find-func" "\
11305 Find, in another window, the definition of FUNCTION near point.
11311 (autoload (quote find-function-other-frame) "find-func" "\
11345 (autoload (quote find-variable-other-window) "find-func" "\
11346 Find, in another window, the definition of VARIABLE near point.
11352 (autoload (quote find-variable-other-frame) "find-func" "\
11393 Find directly the function at point in the other window.
11398 Find directly the variable at point in the other window.
11589 ;;;### (autoloads (follow-delete-other-windows-and-split follow-mode
11605 Minor mode that combines windows into one tall virtual window.
11607 The feeling of a \"virtual window\" has been accomplished by the use
11611 This means that whenever one window is moved, all the
11614 * Should the point (cursor) end up outside a window, another
11615 window displaying that point is selected, if possible. This
11620 side-by-side window are used. The user can, with the help of Follow
11626 To split one large window into two side-by-side windows, the commands
11627 `\\[split-window-horizontally]' or `M-x follow-delete-other-windows-and-split' can be used.
11629 Only windows displayed in the same frame follow each-other.
11643 (autoload (quote follow-delete-other-windows-and-split) "follow" "\
11647 in the selected window. All other windows, in the current
11648 frame, are deleted and the selected window is split in two
11651 \(If one window is moved, the other one will follow.)
11653 If ARG is positive, the leftmost window is selected. If it negative,
11654 the rightmost is selected. If ARG is nil, the leftmost window is
11655 selected if the original window is the first one in the frame.
11659 (global-set-key [f7] 'follow-delete-other-windows-and-split)
11688 ;;;### (autoloads (forms-find-file-other-window forms-find-file forms-mode)
11718 (autoload (quote forms-find-file-other-window) "forms" "\
11719 Visit a file in Forms mode in other window.
11876 other with the source file with the main routine of the inferior.
11889 `gdb-restore-windows' - To restore the window layout.
12067 ;;;### (autoloads (gnus gnus-other-frame gnus-slave gnus-no-server
12094 (autoload (quote gnus-other-frame) "gnus" "\
12097 option `gnus-other-frame-function' (default `gnus') with the argument
12402 ;;;### (autoloads (gnus-fetch-group-other-frame gnus-fetch-group)
12412 (autoload (quote gnus-fetch-group-other-frame) "gnus-group" "\
12821 Add the window configuration CONF to `gnus-buffer-configuration'.
12887 ;;;;;; grep-window-height) "grep" "progmodes/grep.el" (17944 20144))
12890 (defvar grep-window-height nil "\
12891 *Number of lines in a grep window. If nil, use `compilation-window-height'.")
12893 (custom-autoload (quote grep-window-height) "grep" t)
12933 Any other non-nil value means to use `find -print' and `xargs'.
12953 Sets `grep-last-buffer' and `compilation-window-height'.
13115 (add-hook 'same-window-regexps "\\*gud-.*\\*\\(\\|<[0-9]+>\\)")
13233 `local-map', `button' and `kbd-help'. Any value other than t or
13247 Thus, Custom distinguishes between a nil value and other values
13373 and window listing and describing the options.
13375 \\[help-command] \\[help-command] gives the window that lists the options.")
13906 The default is the current buffer and the one in the next window.
14049 non-selected window. Hl-Line mode uses the function
14053 line about point in the selected window only. In this case, it
14069 Global minor mode to highlight the line about point in the current window.
14100 (append general-holidays local-holidays other-holidays))
14439 You can then feed the file name(s) to other commands with \\[yank].
14609 ;;;### (autoloads (ibuffer ibuffer-other-window ibuffer-list-buffers)
14614 Display a list of buffers, in another window.
14620 (autoload (quote ibuffer-other-window) "ibuffer" "\
14621 Like `ibuffer', but displayed in another window by default.
14632 OTHER-WINDOW-P says to use another window.
14638 value `onewindow' means always use another window.
14757 An open brace following other text is treated as if it were
14806 Like other Emacs programming modes, C-j inserts a newline and indents.
14861 strings are completed in lower case, other strings in mixed or
14927 ;;;;;; ido-find-file-other-frame ido-display-file ido-find-file-read-only-other-frame
14928 ;;;;;; ido-find-file-read-only-other-window ido-find-file-read-only
14929 ;;;;;; ido-find-alternate-file ido-find-file-other-window ido-find-file
14930 ;;;;;; ido-find-file-in-dir ido-switch-buffer-other-frame ido-insert-buffer
14931 ;;;;;; ido-kill-buffer ido-display-buffer ido-switch-buffer-other-window
14965 default is to show it in the same window, unless it is already visible
14985 in a separate window.
14991 \\[ido-completion-help] Show list of matching buffers in separate window.
14998 (autoload (quote ido-switch-buffer-other-window) "ido" "\
14999 Switch to another buffer and show it in another window.
15006 Display a buffer in another window but don't select it.
15026 (autoload (quote ido-switch-buffer-other-frame) "ido" "\
15041 default is to show it in the same window, unless it is already
15062 in a separate window.
15076 \\[ido-completion-help] Show list of matching files in separate window.
15081 (autoload (quote ido-find-file-other-window) "ido" "\
15082 Switch to another file and show it in another window.
15089 Switch to another file and show it in another window.
15102 (autoload (quote ido-find-file-read-only-other-window) "ido" "\
15103 Edit file read-only in other window with name obtained via minibuffer.
15109 (autoload (quote ido-find-file-read-only-other-frame) "ido" "\
15110 Edit file read-only in other frame with name obtained via minibuffer.
15117 Display a file in another window but don't select it.
15123 (autoload (quote ido-find-file-other-frame) "ido" "\
15197 (add-hook 'same-window-buffer-names "*ielm*")
15410 ;;;;;; image-dired-dired-with-window-configuration image-dired-dired-insert-marked-thumbs)
15419 (autoload (quote image-dired-dired-with-window-configuration) "image-dired" "\
15420 Open directory DIR and create a default window configuration.
15434 The current window configuration is saved and can be restored by
15435 calling `image-dired-restore-window-configuration'.
15447 you have the dired buffer in the left window and the
15448 `image-dired-thumbnail-buffer' buffer in the right window.
15634 Set Image major mode only when there are no other major modes
15722 Set this to some other function for more advanced comparisons,
15866 (add-hook 'same-window-buffer-names "*inferior-lisp*")
15876 ;;;;;; info info-other-window) "info" "info.el" (18006 55795))
15879 (autoload (quote info-other-window) "info" "\
15880 Like `info' but show the Info buffer in another window.
15883 (add-hook 'same-window-regexps "\\*info\\*\\(\\|<[0-9]+>\\)")
15936 Use the \\<Info-mode-map>\\[Info-index-next] command to see the other matches.
15950 one topic and contains references to other nodes which discuss related
15951 topics. Info has commands to follow the references and show you other nodes.
15956 Selecting other nodes:
15981 \\[Info-scroll-up] Normally, scroll forward a full screen.
15982 Once you scroll far enough in a node that its menu appears on the
15983 screen but after point, the next scroll moves into its first
15986 \\[Info-scroll-down] Normally, scroll backward. If the beginning of the buffer is
16005 \\[clone-buffer] Select a new cloned Info buffer in another window.
16423 Note - substrings of other matches must come last
16430 in a window allowing you to choose one.
16919 even after defining other macros, use \\[kmacro-name-last-macro].
17210 If the feature is required by any other loaded code, and prefix arg FORCE
17378 `printer-name' as the destination for output; any other program is
17954 When Master mode is enabled, you can scroll the slave buffer using the
17995 ;;;### (autoloads (unbold-region bold-region message-news-other-frame
17996 ;;;;;; message-news-other-window message-mail-other-frame message-mail-other-window
18223 (autoload (quote message-mail-other-window) "message" "\
18224 Like `message-mail' command, but display mail buffer in another window.
18228 (autoload (quote message-mail-other-frame) "message" "\
18233 (autoload (quote message-news-other-window) "message" "\
18238 (autoload (quote message-news-other-frame) "message" "\
18335 ;;;;;; mh-smail-batch mh-smail-other-window mh-smail) "mh-comp"
18345 (autoload (quote mh-smail-other-window) "mh-comp" "\
18346 Compose a message with the MH mail system in other window.
18972 PC `codepages' and other coded character sets. See `non-iso-charset-alist'.
19060 character sets, and fontsets (if Emacs is running under a window
19419 Check and setup the variables needed by other commenting functions.
19421 this function before any other, so the rest of the code can assume that
19441 With any other arg, set comment column to indentation of the previous comment
19589 first definition, and if any other symbol, add after that
19833 (if (eq window-system 'x)
19917 The `org-mode' table editor as a minor mode for use in other modes.
20031 will be able to go to other weeks.
20071 in the diary for *today*, not at any other date. If
20081 diary for *today*, not at any other date.
20364 In addition, certain other PC bindings are imitated (to avoid this, set
20368 F6 other-window
20585 Feed the output to a *cvs* buffer, display it in the current window,
20701 An open brace following other text is treated as if it were
21696 a second window will be displayed, and `ps-run-mode-hook' will be called.
21697 The keymap for this second window is:
21704 point to the corresponding spot in the PostScript window, if input
21705 to the interpreter was sent from that window.
21760 Any other value is treated as nil.")
21867 Any other value is treated as t.")
21892 the generated image. This command works only if you are using a window system,
21906 the generated image. This command works only if you are using a window system,
21923 the generated image. This command works only if you are using a window system,
21941 the generated image. This command works only if you are using a window system,
22029 If EXTENSION is any other symbol, it is ignored.
22189 no use for an interactive use of Quail but can be used by some other
22206 other programs. For instance, Vietnamese supporting needs this map to
22713 Under X, these and other functions will also be available as `Ref' menu
22917 ;;;### (autoloads (reposition-window) "reposition" "reposition.el"
22921 (autoload (quote reposition-window) "reposition" "\
22923 Further invocations move it to the top of the window or toggle the
22927 window. If it is partly offscreen, the window is scrolled to get the
22931 Initially `reposition-window' attempts to make both the definition and
22941 (define-key esc-map "\C-l" 'reposition-window)
23013 (add-hook 'same-window-regexps "^\\*rlogin-.*\\*\\(\\|<[0-9]+>\\)")
23018 other arguments for `rlogin'.
23083 `rmail-dont-reply-to-names' explicitly. (The other part of the default
23138 This is handy if you want to preserve the window configuration of
23271 \\[scroll-up] Scroll to next screen of this message.
23272 \\[scroll-down] Scroll to previous screen of this message.
23291 \\[rmail-mail] Mail a message (same as \\[mail-other-window]).
23305 Any other label is present only if you add it with \\[rmail-add-label].
23495 Sort messages of current Rmail file by other correspondent.
23519 ;;;;;; rmail-summary-line-count-flag rmail-summary-scroll-between-messages)
23523 (defvar rmail-summary-scroll-between-messages t "\
23524 *Non-nil means Rmail summary scroll commands move between messages.")
23526 (custom-autoload (quote rmail-summary-scroll-between-messages) "rmailsum" t)
23556 \(including in the date and other lines, as well as the subject line),
23602 ;;;### (autoloads (toggle-rot13-mode rot13-other-window rot13-region
23621 (autoload (quote rot13-other-window) "rot13" "\
23622 Display current buffer in ROT13 in another window.
23625 To terminate the ROT13 display, delete that window. As long as that window
23634 Toggle the use of ROT13 encoding for the current window.
23986 Calling it at any other time replaces your current minibuffer histories,
24052 ;;;### (autoloads (scroll-all-mode) "scroll-all" "scroll-all.el"
24054 ;;; Generated autoloads from scroll-all.el
24056 (defvar scroll-all-mode nil "\
24058 See the command `scroll-all-mode' for a description of this minor mode.
24061 or call the function `scroll-all-mode'.")
24063 (custom-autoload (quote scroll-all-mode) "scroll-all" nil)
24065 (autoload (quote scroll-all-mode) "scroll-all" "\
24068 When Scroll-All mode is on, scrolling commands entered in one window
24076 ;;;### (autoloads (scroll-lock-mode) "scroll-lock" "scroll-lock.el"
24078 ;;; Generated autoloads from scroll-lock.el
24080 (autoload (quote scroll-lock-mode) "scroll-lock" "\
24082 Keys which normally move point by line or paragraph will scroll
24084 will be kept vertically fixed relative to window boundaries
24092 ;;;### (autoloads (mail-other-frame mail-other-window mail mail-mailing-lists
24147 (put (quote send-mail-function) (quote standard-value) (quote ((if (and window-system (memq system-type (quote (darwin windows-nt)))) (quote mailclient-send-it) (quote sendmail-send-it)))))
24149 (defvar send-mail-function (if (and window-system (memq system-type (quote (darwin windows-nt)))) (quote mailclient-send-it) (quote sendmail-send-it)) "\
24336 (add-hook 'same-window-buffer-names "*mail*")
24370 one. Any other non-nil value means to always select the old
24388 (autoload (quote mail-other-window) "sendmail" "\
24389 Like `mail' command, but display mail buffer in another window.
24393 (autoload (quote mail-other-frame) "sendmail" "\
24506 Pages can have <a name=\"SOMENAME\">named points</a> and can link other points
24611 Display a list of Emacs Lisp files that shadow other files.
24672 new version will be copied to each of the other locations. Sites can be
24738 (add-hook 'same-window-buffer-names "*shell*")
24916 endless loop. Modes can define other symbols by locally setting them
25127 *local* date and time of equinoxes and solstices, if visible in the calendar window.
25362 Install the spam.el hooks and do other initialization
25510 If APPEND is any other non-nil value, they are added at the end
26431 Some other cells in the same table are widen as well to keep the
26438 Some other cells in the same table are narrowed as well to keep the
26860 (add-hook 'same-window-regexps "\\*telnet-.*\\*\\(\\|<[0-9]+>\\)")
26874 (add-hook 'same-window-regexps "\\*rsh-[^-]*\\*\\(\\|<[0-9]*>\\)")
26929 WIDTH and HEIGHT are determined from the size of the current window
26930 -- WIDTH will be one less than the window's width, HEIGHT will be its height.
27107 (defvar tex-dvi-view-command (quote (cond ((eq window-system (quote x)) "xdvi") ((eq window-system (quote w32)) "yap") (t "dvi2tty * | cat -s"))) "\
27374 These lines are displayed in another window called the *Occur* window.
27375 In that window, you can position the cursor over one of the lines and
27544 and SAME-WINDOW to show thumbs in the same window.
28103 on a console which has no window system but does have a mouse.
28208 To define items in any other map, use `tool-bar-local-item'.
28237 To define items in any other map, use `tool-bar-local-item-from-menu'.
28285 ;;;### (autoloads (tpu-set-cursor-bound tpu-set-cursor-free tpu-set-scroll-margins)
28289 (autoload (quote tpu-set-scroll-margins) "tpu-extras" "\
28290 Set scroll margins.
28334 trace advice for FUNCTION and activates it together with any other advice
28336 Do not use this to trace functions that switch buffers or do any other
28346 and activates it together with any other advice there might be.
28348 the window or buffer configuration.
28379 This regexp should match tramp file names but no other file names.
28523 Split current window vertically for two-column editing.
28526 for details.). It runs `2C-other-buffer-hook' in the new buffer.
28543 Point becomes the local value of `2C-window-width'. Only lines that
28853 request; dynamic binding of other variables doesn't necessarily
29482 ;;;;;; vc-directory vc-merge vc-insert-headers vc-version-other-window
29598 itself responsible for the file (usually because other files in that
29616 (autoload (quote vc-version-other-window) "vc" "\
29617 Visit version REV of the current file in another window.
29672 List the change log of the current buffer in a window.
30260 of signals or other objects by using name suffices) and to support them
30336 what other useful user options there are (`M-x vhdl-customize' or menu)!
30502 ;;;### (autoloads (View-exit-and-edit view-mode-enter view-mode view-buffer-other-frame
30503 ;;;;;; view-buffer-other-window view-buffer view-file-other-frame
30504 ;;;;;; view-file-other-window view-file) "view" "view.el" (18006
30527 (autoload (quote view-file-other-window) "view" "\
30528 View FILE in View mode in another window.
30529 Return that window to its previous buffer when done.
30540 (autoload (quote view-file-other-frame) "view" "\
30542 Maybe delete other frame and/or return to previous buffer when done.
30569 (autoload (quote view-buffer-other-window) "view" "\
30570 View BUFFER in View mode in another window.
30586 (autoload (quote view-buffer-other-frame) "view" "\
30614 window full, or number of lines set by \\[View-scroll-page-forward-set-page-size] or \\[View-scroll-page-backward-set-page-size]. Half page commands default to
30615 and set \"half page size\" lines which initially is half a window full. Search
30623 \\[View-scroll-to-buffer-end] scroll so that buffer end is at last line of window.
30624 SPC scroll forward \"page size\" lines.
30625 With prefix scroll forward prefix lines.
30626 DEL scroll backward \"page size\" lines.
30627 With prefix scroll backward prefix lines.
30628 \\[View-scroll-page-forward-set-page-size] like \\[View-scroll-page-forward] but with prefix sets \"page size\" to prefix.
30629 \\[View-scroll-page-backward-set-page-size] like \\[View-scroll-page-backward] but with prefix sets \"page size\" to prefix.
30630 \\[View-scroll-half-page-forward] scroll forward \"half page size\" lines. With prefix, sets
30632 \\[View-scroll-half-page-backward] scroll backward \"half page size\" lines. With prefix, sets
30634 RET, LFD scroll forward one line. With prefix scroll forward prefix line(s).
30635 y scroll backward one line. With prefix scroll backward prefix line(s).
30636 \\[View-revert-buffer-scroll-page-forward] revert-buffer if necessary and scroll forward.
30657 \\[View-quit] quit View mode, restoring this window and buffer to previous state.
30666 \\[View-kill-and-leave] quit View mode, kill current buffer and go back to other buffer.
30669 entered by view-file, view-file-other-window, view-file-other-frame, or
30670 \\[dired-view-file] (\\[view-file], \\[view-file-other-window],
30671 \\[view-file-other-frame], or the Dired mode v command),
30674 \\[view-buffer-other-window], \\[view-buffer-other frame], \\[view-file],
30675 \\[view-file-other-window], or \\[view-file-other-frame],
30692 WINDOW is a window used for viewing.
30693 OLD-WINDOW is nil or the window to select after viewing.
30696 2) t Delete WINDOW or, if it is the only window, its frame.
30699 4) quit-window Do `quit-window' in WINDOW.
30868 Please submit bug reports and other feedback to the author, Neil W. Van Dyke
31002 ;;;### (autoloads (widget-minor-mode widget-browse-other-window widget-browse
31016 (autoload (quote widget-browse-other-window) "wid-browse" "\
31017 Show widget browser for WIDGET in other window.
31083 Select the window to the left of the current one.
31085 \"left\" is relative to the position of point in the window; otherwise
31087 \(for negative ARG) of the current window.
31088 If no window is at the desired location, an error is signaled.
31093 Select the window above the current one.
31095 is relative to the position of point in the window; otherwise it is
31097 negative ARG) of the current window.
31098 If no window is at the desired location, an error is signaled.
31103 Select the window to the right of the current one.
31105 \"right\" is relative to the position of point in the window;
31107 bottom edge (for negative ARG) of the current window.
31108 If no window is at the desired location, an error is signaled.
31113 Select the window below the current one.
31115 \"down\" is relative to the position of point in the window; otherwise
31117 \(for negative ARG) of the current window.
31118 If no window is at the desired location, an error is signaled.
31210 C-c scroll-up-line
31222 C-r scroll-down-line
31227 C-w scroll-down
31230 C-z scroll-up
31269 C-o wd delete-other-windows
31270 C-o wh split-window-horizontally
31271 C-o wo other-window
31272 C-o wv split-window-vertically
31532 ;;;;;; "saveplace.el" "sb-image.el" "scroll-bar.el" "select.el"
31544 ;;;;;; "vt100-led.el" "w32-fns.el" "w32-vars.el" "widget.el" "window.el"