Lines Matching +refs:find +refs:lisp +refs:line +refs:indent
91 \let\ptexindent=\indent
103 % starts a new line in the output.
106 % Use TeX 3.0's \inputlineno to get the line number, for better error
197 % @| inserts a changebar to the left of the current line. It should
207 % Append this vertical mode material after the current line in the output.
314 \line{\ewtop\hfil\ewtop}%
316 \line{%
323 \line\bgroup
341 \hfil\egroup % end of (centering) \line\bgroup
345 \line{%
351 \line{\ewbot\hfil\ewbot}%
386 % the input line (except we remove a trailing comment). #1 should be a
433 % to get _exactly_ the rest of the line, we had to prevent such situation.
466 % space in the output. Don't allow a line break at this space, as this
467 % is used only in environments like @example, where each line of input
468 % should produce a line of output anyway.
627 % at the beginning of a line will start with \penalty -- and
640 % @* forces a line break.
643 % @/ allows a line break.
657 % produce a whole line of output instead of starting the paragraph.
662 % to keep its height that of a normal line. According to the rules for
687 % @example, where each end-of-line in the input causes an
688 % end-of-line in the output. We don't want the end-of-line after
690 % should appear on a line by itself (according to the Texinfo
696 % \baselineskip glue before it, and (when the next line of text is done)
700 % To get correct interline space between the last line of the group
701 % and the first line afterwards, we have to propagate \prevdepth.
726 where each line of input produces a line of output.}
747 % If the @need value is less than one line space, it's useless.
754 % normal leading is inserted relative to the preceding line.
790 % outputs text on separate line in roman font, starting at standard page margin
792 % This records the amount of indent in the innermost environment.
893 % @center line
894 % outputs that line, centered.
909 \line{#1}%
913 \def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
919 % @comment ...line which is ignored...
969 % after a section heading. If WORD is `insert', then do indent at such
995 % We also make \indent itself not actually do anything until the next
999 \gdef\indent{%
1001 \indent
1014 \global \let \indent = \ptexindent
1686 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1906 % and it is not used as such in any manual I can find. We need it for
2080 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
2085 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
2092 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
2097 \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
2133 \global\evenheadline={\line{\folio\hfil\thistitle}}
2134 \global\oddheadline={\line{\thischapter\hfil\folio}}
2145 \global\evenheadline={\line{\thischapter\hfil\folio}}
2146 \global\oddheadline={\line{\thischapter\hfil\folio}}
2156 \global\evenheadline={\line{\folio\hfil\thistitle}}
2157 \global\oddheadline={\line{\thischapter\hfil\folio}}
2165 \global\evenheadline={\line{\thischapter\hfil\folio}}
2166 \global\oddheadline={\line{\thischapter\hfil\folio}}
2185 % @settitle line... specifies the title of the document, for headings.
2223 % If the item text does not fit in the space we have, put it on a line
2225 % line. We do not start a paragraph here because then if the next
2227 % horizontal list on a line by itself, resulting in extra blank space.
2259 % following text (if any) will end up on the same line.
2359 \vadjust{\penalty 1200}}% not good to break after first line of item.
2467 % can be specified either with sample text given in a template line,
2488 % Each new table line starts with @item, each subsequent new column
2515 % @multitableparindent is paragraph indent in table.
2519 % 0pt means it depends on current normal line spacing.
2584 % line is not enough. That is bad. So let's go back to just `&' until
2630 % \vtop will set a single line and will also let text wrap and
2636 % Use the current \colcount to find the correct column width:
2666 % blank line, when TeX decides to break the line at the space before the
2667 % box from the multistrut, so the strut ends up on a line by itself.
2746 % Ignore text until a line `@end #1', keeping track of nested conditionals.
2773 % Define a command to find the next `@end #1', which must be on a line
2776 % And this command to find another #1 command, at the beginning of a
2777 % line. (Otherwise, we would consider a line `@c @ifset', for
2820 % own to delimit the rest of the line, and then take it out again if we
2931 % \fooindex ...rest of line... puts an entry in the index foo.
3437 % as its first line, TeX doesn't complain about mismatched braces
3516 % Do not fill out the last line with white space.
3522 % Do not prefer a separate line ending with a hyphen to fewer lines.
3526 % don't both fit on one line. In that case, bob suggests starting the
3527 % dots pretty far over on the line. Unfortunately, a large
3535 % When the entry text needs to be broken, just fill out the first line
3556 % The following is kludged to not output a line of dots in the index if
3567 % If we must, put the page number on a line of its own, and fill out
3568 % this line with blank space. (The \hfil is overwhelmed with the
3591 \def\primary #1{\line{#1\hfil}}
3648 % First we halve the line length, less a little for the gutter between
3649 % the columns. We compute the gutter based on the line length, so it
4045 % 1) We use \vbox rather than the earlier \line to permit
4386 \advance\hsize by -\contentsrightmargin % Don't use the full line length.
4618 \let\indent=\ptexindent
4633 % Define @lisp ... @end lisp.
4634 % @lisp environment forms a group so it can rebind things,
4635 % including the definition of @end lisp (which normally is erroneous).
4637 % Amount to narrow the margins by for @lisp.
4640 % This is the definition that ^^M gets inside @lisp, @example, and other
4670 % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
4706 % Flag to tell @lisp, etc., not to narrow margin.
4743 \obeylines % each line of input is a line of output
4759 % @example, @display, @format, @lisp
4791 % @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
4796 \maketwodispenvs {lisp}{example}{%
4803 % @display/@smalldisplay: same as @lisp except keep current font.
4862 % indent a bit.
4886 % verbatim line.
4916 % Respect line breaks,
4950 % Respect line breaks,
4988 % of the @verbatim input line itself. Otherwise we get an extra blank
4989 % line in the output.
5044 % end-of-line to be a \par, as would happen with the normal active
5056 % Seems pretty fragile, most line-oriented commands will presumably
5118 % As above, allow line break if we have multiple x headers in a row.
5269 % distinguish it from the body text that may end up on the next line
5274 % Figure out line sizes for the paragraph shape.
5275 % The first line needs space for \box0; but if \rightskip is nonzero,
5332 % We want ()&[] to print specially on the defun line.
5687 % line. Whatever was read is then fed to the next control sequence
5867 % not find a line break at a hyphen in a node names. Since some manuals
6033 % character, we would end up writing a line like this: 'xrdef {'hat
6106 \let\indent=\ptexindent
6158 % Don't crash into the line above the footnote text. Since this
6279 \line\bgroup\hss
6511 \leftskip=\tocindent % indent these entries like a toc
6588 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
6590 % stretch added to depend on the line length, hence the dependence on
6696 % He also recommends making @example and @lisp be small.
6837 % name cannot be active until we have parsed the command line.