bc/doc/texinfo.tex

93 % starts a new line in the output.
221           \line{\ewtop\hfil\ewtop}%
223           \line{%
230         \line\bgroup
250         \hfil\egroup % end of (centering) \line\bgroup
254           \line{%
260           \line{\ewbot\hfil\ewbot}%
295 % the input line (except we remove a trailing comment).  #1 should be a
490 % at the beginning of a line will start with \penalty -- and
503 % @* forces a line break.
517 % produce a whole line of output instead of starting the paragraph.
522 % to keep its height that of a normal line.  According to the rules for
536   % next line of text is done) \lineskip glue after it.  (See p.82 of
545     % We have to put a strut on the last line in case the @group is in
547     % Otherwise, the interline space between the last line of the group
548     % and the first line afterwards is too small.  But we can't put the
549     % strut in \Egroup, since there it would be on a line by itself.
550     % Hence this just inserts a strut at the beginning of each line.
553     % Since we have a strut on every line, we don't need any of TeX's
570     % @example, where each end-of-line in the input causes an
571     % end-of-line in the output.  We don't want the end-of-line after
573     % should appear on a line by itself (according to the Texinfo
583 where each line of input produces a line of output.}
606   % If the @need value is less than one line space, it's useless.
613     % normal leading is inserted relative to the preceding line.
675 % outputs text on separate line in roman font, starting at standard page margin
677 % This records the amount of indent in the innermost environment.
722 % @center line   outputs that line, centered
734 % @comment ...line which is ignored...
1077 % looks better when embedded in a line with cmr10.
1239 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1436 % and it is not used as such in any manual I can find.  We need it for
1584 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1588 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1594 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1598   \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1635 \global\evenheadline={\line{\folio\hfil\thistitle}}
1636 \global\oddheadline={\line{\thischapter\hfil\folio}}
1647 \global\evenheadline={\line{\thischapter\hfil\folio}}
1648 \global\oddheadline={\line{\thischapter\hfil\folio}}
1658 \global\evenheadline={\line{\folio\hfil\thistitle}}
1659 \global\oddheadline={\line{\thischapter\hfil\folio}}
1667 \global\evenheadline={\line{\thischapter\hfil\folio}}
1668 \global\oddheadline={\line{\thischapter\hfil\folio}}
1683 % @settitle line...  specifies the title of the document, for headings.
1734   % If the item text does not fit in the space we have, put it on a line
1736   % line.  We do not start a paragraph here because then if the next
1738   % horizontal list on a line by itself, resulting in extra blank space.
1762     % following text (if any) will end up on the same line.
1985 % can be specified either with sample text given in a template line,
2006 % For those who want to use more than one line's worth of words in
2007 % the preamble, break the line within one argument and it
2016 % Each new table line starts with @item, each subsequent new column
2043 % @multitableparindent is paragraph indent in table.
2047 %   0pt means it depends on current normal line spacing.
2105 % This used to have \hskip1sp.  But then the space in a template line is
2130   % each line. Every column entry will cause \colcount to advance by one.
2132   % looks at the current \colcount to find the correct column width.
2143   % \vtop will set a single line and will also let text wrap and
2175   % blank line, when TeX decides to break the line at the space before the
2176   % box from the multistrut, so the strut ends up on a line by itself.
2311 % Ignore text until a line `@end #1'.
2332   % Make the letter c a comment character so that the rest of the line
2369 % uncomment the following line:
2425     % Do minimal line-breaking.
2440 % own to delimit the rest of the line, and then take it out again if we
2574 % \fooindex ...rest of line... puts an entry in the index foo.
2952   % as its first line, TeX doesn't complain about mismatched braces
3022   % Do not fill out the last line with white space.
3028   % Do not prefer a separate line ending with a hyphen to fewer lines.
3032   % don't both fit on one line.  In that case, bob suggests starting the
3033   % dots pretty far over on the line.  Unfortunately, a large
3041   % When the entry text needs to be broken, just fill out the first line
3048   % Start a ``paragraph'' for the index entry so the line breaking
3052   % Insert the text of the index entry.  TeX will do line-breaking on it.
3054   % The following is kludged to not output a line of dots in the index if
3063     % If we must, put the page number on a line of its own, and fill out
3064     % this line with blank space.  (The \hfil is overwhelmed with the
3085 \def\primary #1{\line{#1\hfil}}
3135   % First we halve the line length, less a little for the gutter between
3136   % the columns.  We compute the gutter based on the line length, so it
3583 %       1) We use \vbox rather than the earlier \line to permit
3797       \advance\hsize by -\contentsrightmargin % Don't use the full line length.
3945 % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
4050 % Define @lisp ... @endlisp.
4051 % @lisp does a \begingroup so it can rebind things,
4054 % Amount to narrow the margins by for @lisp.
4057 % This is the definition that ^^M gets inside @lisp, @example, and other
4063 % space in the output.  Don't allow a line break at this space, as this
4064 % is used only in environments like @example, where each line of input
4065 % should produce a line of output anyway.
4089 % \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins.
4124         % Flag to tell @lisp, etc., not to narrow margin.
4162   \obeylines % each line of input is a line of output
4187 % @lisp: indented, narrowed, typewriter font.
4188 \def\lisp{\begingroup
4196 % @example: Same as @lisp.
4197 \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4208 \def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
4210 \def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
4218   \lisp
4221 % @display: same as @lisp except keep current font.
4357 % First, defname, which formats the header line itself.
4368 \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
4510 % way, TeX won't find exactly `{...}' as an undelimited argument, and
4587 % Do complete processing of one @defun or @defunx line already parsed.
5112 % line.  Whatever was read is then fed to the next control sequence
5240   % not find a line break at a hyphen in a node names.  Since some manuals
5327 % Use TeX 3.0's \inputlineno to get the line number, for better error
5404   % character, we would end up writing a line like this: 'xrdef {'hat
5519   % Don't crash into the line above the footnote text.  Since this
5551 % @| inserts a changebar to the left of the current line.  It should
5561   % Append this vertical mode material after the current line in the output.
5702 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
5704 % stretch added to depend on the line length, hence the dependence on
5904 % name cannot be active until we have parsed the command line.