Lines Matching defs:wValue
47 * 0x01 Analog Input line/instrument impedance switch, wValue=0x0901 +
49 * pad (-10dB) switch, wValue=0x0b01 + channel, data=Off/On (2bytes)
50 * ?? wValue=0x0803/04, ?? (2bytes)
51 * 0x0a Master Volume, wValue=0x0200+bus[0:all + only 1..4?] data(2bytes)
52 * Bus Mute/Unmute wValue=0x0100+bus[0:all + only 1..4?], data(2bytes)
53 * 0x28 Clock source, wValue=0x0100, data={1:int,2:spdif,3:adat} (1byte)
54 * 0x29 Set Sample-rate, wValue=0x0100, data=sample-rate(4bytes)
55 * 0x32 Mixer mux, wValue=0x0600 + mixer-channel, data=input-to-connect(2bytes)
56 * 0x33 Output mux, wValue=bus, data=input-to-connect(2bytes)
57 * 0x34 Capture mux, wValue=0...18, data=input-to-connect(2bytes)
58 * 0x3c Matrix Mixer gains, wValue=mixer-node data=gain(2bytes)
62 * 0x01 wValue=0x0901+channel (1byte!!), wValue=0x0b01+channed (1byte!!)
63 * 0x29 wValue=0x0100 sample-rate(4bytes)
64 * wValue=0x0200 ?? 1byte (only once)
65 * 0x2a wValue=0x0100 ?? 4bytes, sample-rate2 ??
68 * 0x3c wValue=0x0002 1byte: sync status (locked=1)
69 * wValue=0x0000 18*2byte: peak meter (inputs)
70 * wValue=0x0001 8(?)*2byte: peak meter (mix)
71 * wValue=0x0003 6*2byte: peak meter (pcm/daw)
74 * 0x3c Save settings to hardware: wValue=0x005a, data=0xa5
462 int wValue = (elem->control << 8) | elem->idx_off;
470 USB_DIR_IN, wValue, idx, buf, elem->channels);