codecs/aw88395/aw88395_device.c

24 		dev_err(aw_dev->dev, "%s write addr error, ret=%d", __func__, ret);
30 		dev_err(aw_dev->dev, "%s write data error, ret=%d", __func__, ret);
45 		dev_err(aw_dev->dev, "%s write addr error, ret=%d", __func__, ret);
52 		dev_err(aw_dev->dev, "%s write datal error, ret=%d", __func__, ret);
59 		dev_err(aw_dev->dev, "%s write datah error, ret=%d", __func__, ret);
77 			dev_err(aw_dev->dev, "write dsp_addr[0x%x] 16-bit dsp_data[0x%x] failed",
83 			dev_err(aw_dev->dev, "write dsp_addr[0x%x] 32-bit dsp_data[0x%x] failed",
87 		dev_err(aw_dev->dev, "data type[%d] unsupported", data_type);
94 		dev_err(aw_dev->dev, "%s fail to clear chip state. Err=%d\n", __func__, ret);
108 		dev_err(aw_dev->dev, "%s write error, ret=%d", __func__, ret);
114 		dev_err(aw_dev->dev, "%s read error, ret=%d", __func__, ret);
130 		dev_err(aw_dev->dev, "%s write error, ret=%d", __func__, ret);
136 		dev_err(aw_dev->dev, "%s read error, ret=%d", __func__, ret);
143 		dev_err(aw_dev->dev, "%s read error, ret=%d", __func__, ret);
162 			dev_err(aw_dev->dev, "read dsp_addr[0x%x] 16-bit dsp_data[0x%x] failed",
168 			dev_err(aw_dev->dev, "read dsp_addr[0x%x] 32r-bit dsp_data[0x%x] failed",
172 		dev_err(aw_dev->dev, "data type[%d] unsupported", data_type);
179 		dev_err(aw_dev->dev, "%s fail to clear chip state. Err=%d\n", __func__, ret);
193 		dev_err(aw_dev->dev, "%s read chipid error. ret = %d", __func__, ret);
235 			dev_err(aw_dev->dev, "dsp read failed");
242 			dev_err(aw_dev->dev, "fw check failed, addr[0x%x], read[0x%x] != bindata[0x%x]",
249 			dev_err(aw_dev->dev, "fw check failed, addr[0x%x] too large", addr);
348 		dev_err(aw_dev->dev, "addr_offset[%d] > crc_dsp_cfg->len[%d]",
362 		dev_err(aw_dev->dev, "data type[%d] unsupported", data_type);
381 		dev_err(aw_dev->dev, "set cali re error");
388 		dev_err(aw_dev->dev, "modify dsp cfg failed");
417 		dev_err(aw_dev->dev, "crc data len :%d > cfg_data len:%d",
423 		dev_err(aw_dev->dev, "The crc data len :%d unsupport", crc_data_len);
457 			dev_err(aw_dev->dev, "read reg0x%x failed", AW88395_SYSST_REG);
462 			dev_err(aw_dev->dev, "check dsp st fail,reg_val:0x%04x", reg_val);
502 		dev_err(aw_dev->dev, "set dsp crc32 failed");
514 		dev_err(aw_dev->dev, "check crc32 fail");
641 		dev_err(aw_dev->dev, "read vsense_reg_val failed");
667 		dev_err(aw_dev->dev, "read vcalb_adj failed");
706 		dev_err(aw_dev->dev, "unsupport vsense status");
711 		dev_err(aw_dev->dev, "vcalk:%d or desc->iscal_factor:%d unsupported",
724 		dev_err(aw_dev->dev, "write vcalb failed");
731 		dev_err(aw_dev->dev, "modify dsp cfg failed");
745 		dev_err(aw_dev->dev, "read cali delay failed, ret=%d", ret);
761 		dev_err(aw_dev->dev, "read interrupt reg fail, ret=%d", ret);
789 		dev_err(aw_dev->dev, "check pll lock fail,reg_val:0x%04x", reg_val);
803 			dev_err(aw_dev->dev, "mode1 iis signal check error");
837 			dev_err(aw_dev->dev, "mode2 iis signal check error");
852 				dev_err(aw_dev->dev, "mode2 switch to mode1, iis signal check error");
872 			dev_err(aw_dev->dev, "mode2 check iis failed");
894 			dev_err(aw_dev->dev, "check sysst fail, cnt=%d, reg_val=0x%04x, check:0x%x",
912 		dev_err(aw_dev->dev, "pa stop check fail:0x%04x", reg_val);
962 			dev_err(aw_dev->dev, "memclk select pll failed");
969 			dev_err(aw_dev->dev, "memclk select OSC failed");
972 		dev_err(aw_dev->dev, "unknown memclk config, flag=0x%x", flag);
1012 		dev_err(aw_dev->dev, "data len:%d unsupported",	data_len);
1070 		dev_err(aw_dev->dev, "reg data is null or len is 0");
1076 		dev_err(aw_dev->dev, "reg update failed");
1093 		dev_err(aw_dev->dev, "read ra error");
1160 		dev_err(aw_dev->dev, "dsp firmware data is null or len is 0");
1200 		dev_err(aw_dev->dev, "dsp config data is null or len is 0");
1223 		dev_err(aw_dev->dev, "get vmax failed");
1241 		dev_err(aw_dev->dev, "check reg 0x40 odd bit failed, read[0x%x] != write[0x%x]",
1250 		dev_err(aw_dev->dev, "check reg 0x40 even bit failed, read[0x%x] != write[0x%x]",
1259 		dev_err(aw_dev->dev, "check dsp fw addr failed, read[0x%x] != write[0x%x]",
1268 		dev_err(aw_dev->dev, "check dsp cfg failed, read[0x%x] != write[0x%x]",
1295 		dev_err(aw_dev->dev, "fw status[%d] error", aw_dev->fw_status);
1314 		dev_err(aw_dev->dev, "update reg failed");
1328 			dev_err(aw_dev->dev, "check sram failed");
1337 			dev_err(aw_dev->dev, "update dsp fw failed");
1346 		dev_err(aw_dev->dev, "update dsp cfg failed");
1378 				dev_err(aw_dev->dev, "dsp wdt status error=%d", ret);
1384 		dev_err(aw_dev->dev, "unknown dsp cfg=%d", aw_dev->dsp_cfg);
1403 			dev_err(aw_dev->dev, "set cali re failed");
1421 		dev_err(aw_dev->dev, "pll check failed cannot start");
1432 		dev_err(aw_dev->dev, "sysst check failed");
1448 				dev_err(aw_dev->dev, "dsp crc check failed");
1455 			dev_err(aw_dev->dev, "dsp status check failed");
1526 			dev_err(aw_dev->dev, "update dsp fw failed");
1529 			dev_err(aw_dev->dev, "update dsp cfg failed");
1550 		dev_err(aw_dev->dev, "aw_dev acf parse failed");
1560 		dev_err(aw_dev->dev, "fw update failed ret = %d\n", ret);
1655 		dev_err(aw_dev->dev, "index[%d] overflow count[%d]",
1672 		dev_err(aw_dev->dev, "%s: index[%d] overflow count[%d]\n",
1704 		dev_err(&i2c->dev, "dev_read_chipid failed ret=%d", ret);
1714 		dev_err((*aw_dev)->dev, "unsupported device");