Lines Matching defs:bit
221 tmp = inw(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */
249 outw(tmp | 0x4, emu->port + A_IOCFG); /* Set bit 2 for mic input */
342 * Enable the audio bit
485 #define EC_EEPROM_SIZE 0x40 /* ECARD EEPROM has 64 16-bit words */
503 * dudes, we need to leave the ADCCAL bit low in order to avoid a DC
516 * control latch will is loaded bit-serially by toggling the Modem control
553 * trim value consists of a 16bit value which is composed of two
554 * 8 bit gain/trim values, one for the left channel and one for the
556 * value in decibels into the corresponding bit pattern for a single
563 unsigned int bit;
571 for (bit = (1 << 15); bit; bit >>= 1) {
576 if (gain & bit)
579 /* Clock the bit */
791 u16 bit = emu->card_capabilities->ca0108_chip ? 0x2000 : 0x8000;
792 if (!(sts & bit))
803 * 16 x 16-bit playback - snd_emu10k1_fx8010_playback_ops
804 * 16 x 32-bit capture - snd_emu10k1_capture_efx_ops
868 /* SPDIF Format. Set Consumer mode, 24bit, copy enable */
951 .adc_1361t = 1, /* 24 bit capture instead of 16bit */
975 * Digital Out/Line in switch using A_IOCFG bit 3 (0x08)
997 .adc_1361t = 1, /* 24 bit capture instead of 16bit */
1226 .adc_1361t = 1, /* 24 bit capture instead of 16bit */
1261 .adc_1361t = 1, /* 24 bit capture instead of 16bit. Fixes ALSA bug#324 */
1436 * has a problem that from time to time it likes to do few DMA reads a bit