net/mac80211/mlme.c

91  * How many Beacon frames need to have been used in average signal strength
97  * We can have multiple work items (and connection probing)
215 	/* now we have the progression HT, VHT, ... */
298 	/* stick to current max mode if we or the AP don't have HE */
306 	/* stick to HE if we or the AP don't have EHT */
386 	 * (it doesn't have 8 streams). Accept the settings in this case anyway.
446 	 * (it doesn't have 8 streams). Accept the settings in this case anyway.
521 	/* the others have MCS 0-9 together, rather than separately from 0-7 */
571 			u8 have, have_rx_nss, have_tx_nss;
573 			have = ieee80211_get_eht_cap_mcs_nss(sta_he_cap,
576 			have_rx_nss = u8_get_bits(have,
578 			have_tx_nss = u8_get_bits(have,
1519 		 * (if applicable) are skipped. So we only have
2129 	 * have an incompatible wider chandef.
2331 	/* If we have both 802.11h and Cisco DTPC, apply both limits
2666 			 * makes no sense and we have to transmit somehow - the
3109 	 * if we want to get out of ps before disassoc (why?) we have
3307 	 * we have or will be receiving any beacons or data, so let's
3476 	 * connection monitoring has kicked in and we have already sent
3480 	 * In either case we have to ignore the current call to this
3574 	 * MLO drivers should have HANDLES_QUIET_CSA, so that csa_blocked_tx
3588 		 * have switched to just have a single link active?
4252 		 * otherwise elems->prof would have been set to NULL.
4322 		 * have to include the IEs in the (re)association response.
4566 		/* still enable QoS since we might have HT/VHT */
4863 	/* VHT - if we have - is fine, including 80 MHz, check 160 below again */
4891 	/* so we have HE */
4947 	/* we have EHT */
5243 	/* links might have changed due to rejected ones, set them again */
5338 	 * AssocResp and ReassocResp have identical structure, so process both
6003 	 * same link set, reject frame if not all links have mapping
7119 			 * we have already processed a (Re)Association Response
8615 	 * they will not do anything but might not have been