include/net/cfg80211.h

179  * @beacon_found: helper to regulatory code to indicate when a beacon
1330  * struct cfg80211_beacon_data - beacon data
1331  * @link_id: the link ID for the AP MLD link sending this beacon
1332  * @head: head portion of beacon (before TIM IE)
1334  * @tail: tail portion of beacon (after TIM IE)
1360  *	attribute is present in beacon data or not.
1450  * @beacon: beacon data
1451  * @beacon_interval: beacon interval
1489 	struct cfg80211_beacon_data beacon;
1527  * @beacon: beacon data
1532 	struct cfg80211_beacon_data beacon;
1543  * @beacon_csa: beacon data while performing the switch
1544  * @counter_offsets_beacon: offsets of the counters within the beacon (tail)
1546  * @n_counter_offsets_beacon: number of csa counters the beacon (tail)
1548  * @beacon_after: beacon data to be used on the new channel
1574  * @beacon_color_change: beacon data while performing the color countdown
1575  * @counter_offset_beacon: offsets of the counters within the beacon (tail)
1577  * @beacon_next: beacon data to be used after the color change
1606  * @new_beacon_int: set this to the beacon interval of a new interface
1972  * @beacon_interval: beacon interval
2073  * @beacon_loss_count: Number of times beacon loss event has triggered.
2440  *	after transmitting its beacon.
2506  * @beacon_interval: beacon interval to use
2872  *	the BSS that requested the scan in which the beacon/probe was received.
2904  * @from_beacon: these IEs are known to come from a beacon
2923  * @beacon_interval: the beacon interval as from the frame
2937  *	a BSS that hides the SSID in its beacon, this points to the BSS struct
2938  *	that holds the beacon data. @beacon_ies is still valid, of course, and
3215  * @ie: information element(s) to include in the beacon
3217  * @beacon_interval: beacon interval to use
4252  * @change_beacon: Change the beacon parameters for an access point mode
4998  *	set this flag to update channels on beacon hints.
5128 	 * In this combination, the beacon intervals between infrastructure
5147 	 * This interface combination supports different beacon intervals.
5150 	 *   all beacon intervals for different interface must be same.
5152 	 *   any beacon interval for the interface part of this combination AND
5153 	 *   GCD of all beacon intervals from beaconing interfaces of this
6157  *	unprotected beacon report
7154  * @mgmt: the management frame (probe response or beacon)
7234  *	from a beacon or probe response
7235  * @CFG80211_BSS_FTYPE_BEACON: data comes from a beacon
7237  * @CFG80211_BSS_FTYPE_S1G_BEACON: data comes from an S1G beacon
7281  * @tsf: the TSF sent by the peer in the beacon/probe response (or 0)
7283  * @beacon_interval: the beacon interval announced by the peer
7550  * beacon protection was enabled (BIGTK configured in station mode).
7584  * either a beacon has to have been received from the IBSS, or one of
7586  * with the locally generated beacon -- this guarantees that there is
7604  * detected, most likely via a beacon or, less likely, via a probe response.
8612  * cfg80211_cqm_beacon_loss_notify - beacon loss event
8616  * Notify userspace about beacon loss from the connected AP.
8754  * cfg80211_report_obss_beacon_khz - report beacon from other APs
8755  * @wiphy: The wiphy that received the beacon
8761  * Use this function to report to userspace when a beacon was
8769  * cfg80211_report_obss_beacon - report beacon from other APs
8770  * @wiphy: The wiphy that received the beacon
8776  * Use this function to report to userspace when a beacon was