usb/serial/keyspan.c

715 	dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,
729 			dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);
733 		dev_dbg(&port->dev, "%s - endpoint %x flip %d\n",
756 			dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);
778 		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
798 			dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
823 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
834 	dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);
852 		dev_dbg(&port->dev, "%s - sending setup\n", __func__);
871 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
876 		dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
884 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
905 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
930 			dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
948 			dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",
969 		dev_dbg(&port->dev, "%s - sending setup\n", __func__);
989 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
995 		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1003 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
1024 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1048 			dev_dbg(&port->dev, "%s - sending setup\n", __func__);
1072 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1079 		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1087 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
1109 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1128 		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
1166 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1180 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1193 			dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
1237 		dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1257 		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
1286 				dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
1313 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1330 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1335 		dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
1361 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1375 		dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);
1396 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
1403 		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
1413 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
1433 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
1451 			dev_dbg(&port->dev, "%s - sending setup\n", __func__);
1530 			dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);
1607 	dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
1613 		dev_dbg(&serial->dev->dev, "Firmware already loaded.  Quitting.\n");
1673 	dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
1718 	dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n",
1753 	dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",
1850 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1877 		dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
1890 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1913 		dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
1932 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
1977 		/*  dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */
1991 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
2024 	dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);
2039 	dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);
2050 		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2054 	dev_dbg(&port->dev, "%s - endpoint %x\n",
2062 		/*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2076 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2171 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2194 		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2203 		dev_dbg(&port->dev, "%s already writing\n", __func__);
2214 		dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",
2289 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
2317 		dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
2321 	dev_dbg(&port->dev, "%s - endpoint %x (%d)\n",
2330 		/*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2346 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2466 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2490 		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
2499 		dev_dbg(&port->dev, "%s already writing\n", __func__);
2512 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2597 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2623 		dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
2632 		/*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
2648 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
2740 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
2820 			dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err);
2825 			dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err);