scsi/qla2xxx/qla_init.c

8161 qla28xx_component_bitmask(struct qla27xx_image_status *aux, uint bitmask)
8163 	return aux->bitmap & bitmask ?
8169     struct active_regions *active_regions, struct qla27xx_image_status *aux)
8171 	active_regions->aux.board_config =
8172 	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_BOARD_CONFIG);
8174 	active_regions->aux.vpd_nvram =
8175 	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_VPD_NVRAM);
8177 	active_regions->aux.npiv_config_0_1 =
8178 	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NPIV_CONFIG_0_1);
8180 	active_regions->aux.npiv_config_2_3 =
8181 	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NPIV_CONFIG_2_3);
8183 	active_regions->aux.nvme_params =
8184 	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NVME_PARAMS);
8212 		ql_dbg(ql_dbg_init, vha, 0x018a, "Primary aux image not addressed\n");
8219 	qla27xx_print_image(vha, "Primary aux image", &pri_aux_image_status);
8223 		    "Primary aux image signature (%#x) not valid\n",
8230 		    "Primary aux image checksum failed\n");
8238 		    "Primary aux image is active\n");
8245 		    "Secondary aux image not addressed\n");
8252 	qla27xx_print_image(vha, "Secondary aux image", &sec_aux_image_status);
8256 		    "Secondary aux image signature (%#x) not valid\n",
8263 		    "Secondary aux image checksum failed\n");
8271 		    "Secondary aux image is active\n");
8293 	    "aux images active: BCFG=%u VPD/NVR=%u NPIV0/1=%u NPIV2/3=%u, NVME=%u\n",
8294 	    active_regions->aux.board_config,
8295 	    active_regions->aux.vpd_nvram,
8296 	    active_regions->aux.npiv_config_0_1,
8297 	    active_regions->aux.npiv_config_2_3,
8298 	    active_regions->aux.nvme_params);
9064 		if (active_regions.aux.vpd_nvram == QLA27XX_SECONDARY_IMAGE)
9068 		    active_regions.aux.vpd_nvram == QLA27XX_PRIMARY_IMAGE ?
9076 		if (active_regions.aux.vpd_nvram == QLA27XX_SECONDARY_IMAGE)
9081 	    active_regions.aux.vpd_nvram == QLA27XX_PRIMARY_IMAGE ?