scsi/lpfc/lpfc_init.c

306  * Option rom version of the HBA. This function translate the version number
480 	/* If no serial number in VPD data, use low 6 bytes of WWNN */
2749 	 * and we put the port number on the end
2773  * @cnt: the number of IOCBs to be posted to the IOCB ring.
2775  * This routine posts a given number of IOCBs with the associated DMA buffer
2779  *   The number of IOCBs NOT able to be posted to the IOCB ring.
2876  * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
2972  * @RandomChallenge: pointer to the entry of host challenge random number array.
4404 	/* maximum number of xris available for nvme buffers */
4465  * @num_to_alloc: The requested number of buffers to allocate.
4473  *   int - number of IO buffers that were allocated and posted.
4495 		 * number of SGE's necessary to support the sg_tablesize.
4792 		/* SLI-3 has a limited number of hardware queues (3),
5462 	phba->sli4_hba.link_state.number =
5477 			phba->sli4_hba.link_state.number,
5747 	/* Get the number of driver events in this sample and reset counter */
5751 	/* Get the number of warning events - FPIN and Signal for this minute */
5759 	/* Get the number of alarm events - FPIN and Signal for this minute */
6250 	phba->sli4_hba.link_state.number =
6279 			phba->sli4_hba.link_state.number,
7078 	/* Make sure the FW has encoded the correct magic number to
7395  * @dev_grp: The HBA PCI-Device group number.
7581  * lpfc_sli_sriov_nr_virtfn_get - Get the number of sr-iov virtual functions
7586  * enable the number of virtual functions to the physical function. As
7606  * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions
7608  * @nr_vfn: number of virtual functions to be enabled.
7612  * enable the number of virtual functions to the physical function. As
7635 				"with vfn number nr_vf:%d, rc:%d\n",
7640 				"with vfn number nr_vf:%d\n", nr_vfn);
7866 					"2808 Requested number of SR-IOV "
8444 					"3020 Requested number of SR-IOV "
8557  * @dev_grp: The HBA PCI-Device group number.
8664  * @iocb_count: number of requested iocbs
9033 	/* Assign an unused board number */
9060 	/* Release the driver assigned board number */
9297 	/* Get the bus address of Bar0 and Bar2 and the number of bytes
9688  * @vf: virtual function number
9691  * based on the given viftual function number, @vf.
10423  * we just use some constant number as place holder.
11853 	 * number of bytes required by each mapping. The mapping of the
12424  * @vectors: number of msix vectors allocated.
12966  * the number of cpus on the same numa node as this adapter.  The vectors are
13103 				"3238 Reducing IO channels to match number of "
14503  * returns the number of ELS/CT IOCBs to reserve
14533  * returns the number of ELS/CT + NVMET IOCBs to reserve