Lines Matching refs:LVD
388 #define ASC_IERR_HVD_DEVICE 0x0100 /* HVD device on LVD port */
1436 #define LVD 0x0800 /* LVD Device Detect */
1438 #define TERM_LVD 0x00C0 /* LVD Termination Bits */
1439 #define TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */
1440 #define TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */
1444 #define C_DET_LVD 0x000C /* LVD Cable Detect Bits */
1445 #define C_DET3 0x0008 /* Cable Detect for LVD External Wide */
1446 #define C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */
1682 #define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */
4532 * 0100b (0x4) 40 Mhz (LVD/Ultra2)
5082 * LVD device can be attached to SE connector while SE device attached
5083 * to LVD connector. If LVD device attached to SE connector, it only
5086 * If an HVD device is attached to one of LVD connectors, return an
5096 * If either SE or LVD automatic termination control is enabled, then
5121 /* LVD automatic termination control is enabled. */
5147 * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and HVD/LVD/SE
5577 * can not be connected to either connector. An LVD device or SE device
5591 * function may use either LVD or SE mode. Corresponding the SE automatic
10267 asc_dvc->cfg->termination = termination; /* auto termination for LVD */
10491 asc_dvc->cfg->termination = termination; /* auto termination for LVD */