drivers/scsi/BusLogic.c

635 	pr_probeinfo->io_addr = 0;
647 		unsigned long io_addr;
659 		io_addr = base_addr0 = pci_resource_start(pci_device, 0);
664 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
674 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
679 			blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
687 		host_adapter->io_addr = io_addr;
741 			pr_probeinfo->io_addr = io_addr;
753 			probeinfo->io_addr = io_addr;
789 		unsigned long io_addr;
800 		io_addr = pci_resource_start(pci_device, 0);
802 		if (io_addr == 0 || irq_ch == 0)
807 			if (probeinfo->io_addr == io_addr &&
845 		unsigned long io_addr;
857 		io_addr = base_addr0 = pci_resource_start(pci_device, 0);
862 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
872 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
877 			blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
884 			probeinfo->io_addr = io_addr;
895 		blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
949 				myadapter->io_addr = probeinfo->io_addr;
996 		blogic_err("Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr);
998 		blogic_err("While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n", adapter, adapter->io_addr);
1021 		fpinfo->base_addr = (u32) adapter->io_addr;
1027 			blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
1032 			blogic_notice("BusLogic_Probe(0x%lX): FlashPoint Found\n", adapter, adapter->io_addr);
1049 		blogic_notice("BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all);
1128 		blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1148 		blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1164 		blogic_notice("BusLogic_HardwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1221 				adapter->io_addr,
1710 	blogic_info("  Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge"));
2147 	host->unique_id = adapter->io_addr;
2239 		if (probeinfo->io_addr == 0)
2244 		myadapter->io_addr = probeinfo->io_addr;
2256 		if (!request_region(myadapter->io_addr, myadapter->addr_count,
2264 			release_region(myadapter->io_addr,
2273 			release_region(myadapter->io_addr,
2282 			release_region(myadapter->io_addr,
2304 			release_region(myadapter->io_addr,
2343 			release_region(myadapter->io_addr,
2345 			if (!request_region(myadapter->io_addr,
2351 					(unsigned long)myadapter->io_addr);
2426 	release_region(adapter->io_addr, adapter->addr_count);