Lines Matching defs:functions
11 * functions. The SoC function enabled on a pin is determined on a priority
39 * different registers for the different functions that enable each signal:
45 * E19 is a single-signal pin with two functions that influence the active
55 * distinct SoC functions: A specific SIOPBI bit in register SCUA4, and an ACPI
57 * addition to B19. Both of the low priority functions as well as the high
131 * VPI functions on the current pin.
154 * * Pins provide signals according to functions activated in the mux
164 * * A function represents a set of signals; functions are distinct if they
168 * * Signals participate in one or more functions or groups
181 * functions in which the signal participates are active, and no higher
191 * * Each pin must know the signal expressions of functions in which it
193 * by deactivating all functions that activate higher priority signals on the
200 * * The VPIDE signal participates in 3 functions: VPI18, VPI24 and VPI30
208 * and VPI30 functions all be disabled
210 * * Similarly, all of VPI18, VPI24, VPI30 and NDCD1 functions must be disabled
218 * created with respect to the SoC functions in which they participate. This is
235 * and functions was a concern, so the table design along with the macro jungle
372 * For ball E19, we have multiple functions enabling a single signal, LPCRST#.
703 * @high: Macro name for the highest priority signal functions
704 * @low: Macro name for the low signal functions
804 const struct aspeed_pin_function *functions;