Lines Matching refs:IL_ERR

70 		IL_ERR("Tx flush command to flush out all frames\n");
200 IL_ERR("Unable to initialize Rx queue\n");
334 IL_ERR("Failed to alloc_pages with %s. "
440 IL_ERR("Can't stop Rx DMA.\n");
590 IL_ERR("dev_alloc_skb failed\n");
646 IL_ERR("MPDU frame without cached PHY data\n");
1243 IL_ERR("FH register values:\n");
1245 IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]),
1634 IL_ERR("Unknown encode cipher %x\n", keyconf->cipher);
1978 IL_ERR("Scheduler BC Table allocation failed\n");
1984 IL_ERR("Keep Warm allocation failed\n");
2007 IL_ERR("Tx %d queue init failed\n", txq_id);
2078 IL_ERR("Timeout stopping DMA channel %d [0x%08x]",
2232 IL_ERR("Start AGG on invalid station\n");
2239 IL_ERR("Start AGG when state is not IL_AGG_OFF !\n");
2245 IL_ERR("No free aggregation queue available\n");
2325 IL_ERR("Invalid station for AGG tid %d\n", tid);
2461 IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
2506 IL_ERR("Received BA when not expected\n");
2596 IL_ERR("Requested station info for sta %d before ready.\n",
2711 IL_ERR("BUG_ON idx doesn't match seq control"
2774 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
2794 IL_ERR("Station not known\n");
2922 IL_ERR("BUG_ON scd_flow is bigger than number of queues\n");
3029 IL_ERR("Unable to allocate memory for LQ cmd.\n");
3089 IL_ERR("Unable to add station %pM\n", addr);
3103 IL_ERR("Unable to initialize rate scaling for station %pM.\n",
3110 IL_ERR("Link quality command failed (%d)\n", ret);
3442 IL_ERR("idx %d not used in uCode key table.\n",
3490 IL_ERR("Unknown alg: %s cipher = %x\n", __func__,
3518 IL_ERR("Unable to prepare broadcast station\n");
3530 IL_ERR
3557 IL_ERR("Unable to initialize rate scaling for bcast sta.\n");
3639 IL_ERR("Invalid station for AGG tid %d\n", tid);
3711 IL_ERR("Could not allocate frame!\n");
3791 IL_ERR("Trying to build beacon without beaconing enabled\n");
3840 IL_ERR("Could not obtain free frame buffer for beacon "
3847 IL_ERR("Error configuring the beacon command\n");
3924 IL_ERR("Too many chunks: %i\n", num_tbs);
3972 IL_ERR("Error can not send more than %d chunks\n",
3979 IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr);
4382 IL_ERR("Hardware error detected. Restarting.\n");
4443 IL_ERR("Microcode CT kill error detected.\n");
4450 IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n",
4491 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
4557 IL_ERR("%s is not in hex or decimal form.\n", buf);
4608 IL_ERR("failed setting tx power (0x%08x).\n", ret);
4675 IL_ERR("no suitable firmware found!\n");
4711 IL_ERR("File size too small!\n");
4728 IL_ERR("uCode file size %d does not match expected size\n",
4771 IL_ERR("request for firmware file '%s' failed.\n",
4781 IL_ERR("File size way too small!\n");
4799 IL_ERR("Driver unable to support your firmware API. "
4806 IL_ERR("Firmware has old API version. Expected v%u, "
4835 IL_ERR("uCode instr len %zd too large to fit in\n",
4841 IL_ERR("uCode data len %zd too large to fit in\n",
4847 IL_ERR("uCode init instr len %zd too large to fit in\n",
4853 IL_ERR("uCode init data len %zd too large to fit in\n",
4859 IL_ERR("uCode boot instr len %zd too large to fit in\n",
4968 IL_ERR("failed to create sysfs device attributes\n");
4985 IL_ERR("failed to allocate pci memory\n");
5080 IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n",
5088 IL_ERR("Start IWL Error Log Dump:\n");
5089 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
5105 IL_ERR("Desc Time "
5107 IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
5109 IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n");
5110 IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1,
5131 IL_ERR("C_CT_KILL_CONFIG failed\n");
5510 IL_ERR("ucode not available for device bringup\n");
5523 IL_ERR("HW not ready\n");
5547 IL_ERR("Unable to init nic\n");
5578 IL_ERR("Unable to set up bootstrap uCode: %d\n", ret);
5596 IL_ERR("Unable to initialize device after %d attempts.\n", i);
5772 IL_ERR("Failed to register hw (error %d)\n", ret);
5808 IL_ERR("START_ALIVE timeout after %dms.\n",
6024 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
6362 IL_ERR("initializing regulatory failed: %d\n", ret);
6368 IL_ERR("initializing geos failed: %d\n", ret);
6581 IL_ERR("Unable to init EEPROM\n");
6619 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);