Lines Matching defs:in
23 * Ownership of correctness in regards to WMI commands belongs to the host
236 /* introduced in 10.2 */
538 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
539 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
543 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
614 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
683 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
1528 /* FW code profile data in response to profile request */
2182 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2228 /* regdomain value specified in EEPROM */
2262 * actual number of units to allocate . if flags in the num_unit_info
2373 * done in target. This determines maximum number of peers supported
2374 * by target in offload mode
2391 * result in the same hash value, the second of these conflicting
2392 * entries can slide to the next index in the address search table,
2428 * This parameter specifies the timeout in milliseconds for each
2475 * target how many peer elements it needs to provide storage for in
2487 * what to do if it finds no entries in its multicast group
2488 * membership table for the multicast IP address in the tx frame.
2492 * address from the tx frame is found in the multicast group
2496 * address from the tx frame is found in the multicast group
2576 * result in the same hash value, the second of these conflicting
2577 * entries can slide to the next index in the address search table,
2613 * This parameter specifies the timeout in milliseconds for each
2660 * target how many peer elements it needs to provide storage for in
2672 * what to do if it finds no entries in its multicast group
2673 * membership table for the multicast IP address in the tx frame.
2677 * address from the tx frame is found in the multicast group
2681 * address from the tx frame is found in the multicast group
2776 * reorder buffering, PN checking need to be done in target.
2777 * This determines maximum number of peers supported by target in
2795 * result in the same hash value, the second of these conflicting
2796 * entries can slide to the next index in the address search table,
2825 * been received. This parameter specifies the timeout in milliseconds
2858 * how many peer elements it needs to provide storage for in its
2868 * what to do if it finds no entries in its multicast group membership
2869 * table for the multicast IP address in the tx frame.
2873 * from the tx frame is found in the multicast group membership
2876 * from the tx frame is found in the multicast group membership
3005 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3009 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3062 /* id of the request that is passed up in service ready */
3175 /* dwell time in msec on active channels */
3177 /* dwell time in msec on passive channels */
3180 * min time in msec on the BSS channel,only valid if at least one
3185 * max rest time in msec on the BSS channel,only valid if at least
3206 /* time in msec between 2 consecutive probe requests with in a set. */
3209 * data inactivity time in msec on bss channel that will be used by
3213 /* maximum time in msec allowed for scan */
3216 * delay in msec before sending first probe request after switching
3382 * This defines how much headroom is kept in the
3384 * payload, in order for the WMI PHY error and
3387 * This is in bytes.
3395 * good idea to pass all the fields in the RX status
3657 /* Command to set/unset chip in quiet mode */
3659 /* period in TUs */
3662 /* duration in TUs */
3665 /* offset in TUs */
3867 /* LTR latency for BE, in us */
3869 /* LTR latency for BK, in us */
3871 /* LTR latency for VI, in us */
3873 /* LTR latency for VO, in us */
3875 /* LTR AC latency timeout, in ms */
3877 /* LTR platform latency override, in us */
3879 /* LTR-RX override, in us */
3881 /* Tx activity timeout for LTR, in us */
3895 /* pdev level stats update period in ms */
3897 /* vdev level stats update period in ms */
3899 /* peer level stats update period in ms */
3919 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3966 /* LTR latency for BE, in us */
3968 /* LTR latency for BK, in us */
3970 /* LTR latency for VI, in us */
3972 /* LTR latency for VO, in us */
3974 /* LTR AC latency timeout, in ms */
3976 /* LTR platform latency override, in us */
3978 /* LTR-RX override, in us */
3980 /* Tx activity timeout for LTR, in us */
3986 /* pdev level stats update period in ms */
3988 /* vdev level stats update period in ms */
3990 /* peer level stats update period in ms */
4010 /* Enable/Disable CDD for 1x1 STAs in rate control module */
4152 /* valid period is 1 ~ 60000ms, unit in millisecond */
4369 /* Num PPDUs cleaned up in TX abort */
4442 /* Num PPDUs cleaned up in TX abort */
4514 /* Cnts any change in ring routing mid-ppdu */
4906 __le32 duration; /* Absent period duration in micro seconds */
4907 __le32 interval; /* Absent period interval in micro seconds */
4908 __le32 start_time; /* 32 bit tsf time when in starts */
5206 /* beacon interval in TUs */
5208 /* Listen interval in TUs */
5210 /* multicast rate in Mbps */
5212 /* management frame rate in Mbps */
5218 /* SWBA time (time before tbtt in msec) */
5222 /* age out time in msec for frames queued for station in power save */
5225 * Host SWBA interval (time in msec before tbtt for SWBA event
5229 /* DTIM period (specified in units of num beacon intervals) */
5321 * Drops un-encrypted packets if eceived in an encrypted connection
5338 /* beacon interval in TUs */
5340 /* Listen interval in TUs */
5342 /* multicast rate in Mbps */
5344 /* management frame rate in Mbps */
5350 /* SWBA time (time before tbtt in msec) */
5354 /* age out time in msec for frames queued for station in power save */
5357 * Host SWBA interval (time in msec before tbtt for SWBA event
5361 /* DTIM period (specified in units of num beacon intervals) */
5615 /* TODO: please add more comments if you have in-depth information */
5624 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5643 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5749 /* introduced in 10.2 */
5823 * STA is in sleep state.
5831 * sending null frame (or) a data frame (with PS==0) in response to TIM
5832 * bit set in the received beacon frame from AP.
5837 * Here the power save state machine will not wakeup in response to TIM
5865 * The maximum number of PS-Poll frames the FW will send in response to
5866 * traffic advertised in TIM before waking up (by sending a null frame with PS
5881 * STA PS. This could result in very poor Rx performance with STA doing
5891 * on AP capability and the state Set in the association request by the
5959 * TX/RX inactivity time in msec before going to sleep.
6025 * request Set in the association request received from the station.
6037 * The service period from wme ie in the (re)assoc request frame.
6043 /* Time in seconds for aging out buffered frames for STA in PS */
6087 /* Bit 0 - Flag to indicate an update in NOA schedule
6094 * Bits 1-7 - Ctwindow in TUs
6137 /* Bit 0 - Flag to indicate an update in NOA schedule
6144 * Bits 1-7 - Ctwindow in TUs
6203 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6209 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6331 * info in one word and Rx in another word. This is split
6447 * module which resides in the firmware. The bit definitions are
6448 * consistent with that defined in if_athrate.c.
6462 /* Maximum listen interval supported by hw in units of beacon interval */
6488 /* HT Operation Element of the peer. Five bytes packed in 2
6619 /* note: ip4 addresses are in network byte order, i.e. big endian */
6630 __le32 interval; /* in seconds */
6680 /* to enable dbglog in the firmware */
6919 /* temperature value in Celsius degree */