ath/ath10k/wmi-tlv.c

12 #include "wmi.h"
13 #include "wmi-ops.h"
14 #include "wmi-tlv.h"
84 				   "wmi tlv parse failure at byte %zd (%zu bytes left, %zu expected)\n",
97 				   "wmi tlv parse failure of tag %u at byte %zd (%zu bytes left, %u expected)\n",
106 				   "wmi tlv parse failure of tag %u at byte %zd (%u bytes is less than min length %zu)\n",
234 		   "wmi tlv stats peer addr %pMF rx rate code 0x%x bit rate %d kbps\n",
240 		   "wmi tlv stats tx rate code 0x%x bit rate %d kbps\n",
289 		   "wmi tlv peer stats info update peer vdev id %d peers %i more data %d\n",
395 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv diag event len %d\n", len);
428 		   "wmi tlv p2p noa vdev_id %i descriptors %u\n",
464 		   "wmi tlv tx pause pause_id %u action %u vdev_map 0x%08x peer_id %u tid_map 0x%08x\n",
525 		   "wmi tlv rfkill state change gpio %d type %d radio_state %d\n",
624 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv peer delete response\n");
657 			   "wmi tlv testmode consumed 0x%x\n", id);
865 	if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map))
939 	if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map))
1343 		   "wmi tlv abi 0x%08x ?= 0x%08x, 0x%08x ?= 0x%08x, 0x%08x ?= 0x%08x, 0x%08x ?= 0x%08x, 0x%08x ?= 0x%08x\n",
1532 		   "wmi tlv stats update pdev %i vdev %i peer %i bcnflt %i chan %i peer_extd %i\n",
1731 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev suspend\n");
1752 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev resume\n");
1780 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev set rd\n");
1808 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev set param %d value 0x%x\n",
1824 	for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
1830 		chunk->ptr = __cpu_to_le32(ar->wmi.mem_chunks[i].paddr);
1831 		chunk->size = __cpu_to_le32(ar->wmi.mem_chunks[i].len);
1832 		chunk->req_id = __cpu_to_le32(ar->wmi.mem_chunks[i].req_id);
1835 			     ar->wmi.svc_map)) {
1836 			paddr = ar->wmi.mem_chunks[i].paddr;
1841 			   "wmi-tlv chunk %d len %d, addr 0x%llx, id 0x%x\n",
1843 			   ar->wmi.mem_chunks[i].len,
1844 			   (unsigned long long)ar->wmi.mem_chunks[i].paddr,
1845 			   ar->wmi.mem_chunks[i].req_id);
1862 	chunks_len = ar->wmi.num_mem_chunks *
1902 	cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
1913 	if (test_bit(WMI_SERVICE_RX_FULL_REORDER, ar->wmi.svc_map)) {
1932 	cfg->rx_decap_mode = __cpu_to_le32(ar->wmi.rx_decap_mode);
1963 	if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map))
1968 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv init\n");
2068 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv start scan\n");
2106 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv stop scan\n");
2156 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev create\n");
2177 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev delete\n");
2253 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev start\n");
2274 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev stop\n");
2299 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev up\n");
2320 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev down\n");
2344 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev %d set param %d value 0x%x\n",
2400 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev install key\n");
2422 		   "wmi tlv vdev sta uapsd auto trigger ac %d prio %d svc int %d susp int %d delay int %d\n",
2472 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev sta uapsd auto trigger\n");
2518 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev wmm conf\n");
2561 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv sta keepalive vdev %d enabled %d method %d interval %d\n",
2587 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv peer create\n");
2610 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv peer delete\n");
2634 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv peer flush\n");
2662 		   "wmi tlv vdev %d peer %pM set param %d value 0x%x\n",
2753 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv peer assoc\n");
2776 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv set psmode\n");
2801 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv set sta ps\n");
2829 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv ap ps param\n");
2886 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv scan chan list\n");
2907 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv scan prob req oui\n");
2948 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv beacon dma\n");
2986 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev set wmm\n");
3007 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv request stats\n");
3037 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv request peer stats info\n");
3046 	struct ath10k_wmi *wmi = &ar->wmi;
3048 	idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
3057 	struct ath10k_wmi *wmi = &ar->wmi;
3069 	ret = idr_alloc(&wmi->mgmt_pending_tx, pkt_addr, 0,
3070 			wmi->mgmt_max_num_pending_tx, GFP_ATOMIC);
3073 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi mgmt tx alloc msdu_id ret %d\n", ret);
3178 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv force fw hang\n");
3230 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv dbglog value 0x%08x\n", value);
3258 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pktlog enable filter 0x%08x\n",
3278 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi pdev get temperature tlv\n");
3305 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pktlog disable\n");
3368 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv bcn tmpl vdev_id %i\n",
3417 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv prb tmpl vdev_id %i\n",
3457 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv p2p go bcn ie for vdev %i\n",
3476 	if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
3513 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv update fw tdls state %d for vdev %i\n",
3615 		   "wmi tlv tdls peer update vdev %i state %d n_chans %u\n",
3646 		   "wmi tlv quiet param: period %u duration %u enabled %d\n",
3673 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv wow enable\n");
3702 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv wow add wakeup event %s enable %d vdev_id %d\n",
3725 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv wow host wakeup ind\n");
3824 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv wow add pattern vdev_id %d pattern_id %d, pattern_offset %d\n",
3852 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv wow del pattern vdev_id %d pattern_id %d\n",
3978 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv start pno config vdev_id %d\n",
4029 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv stop pno config vdev_id %d\n", vdev_id);
4067 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv adaptive qcs %d\n", enable);
4095 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv echo value 0x%08x\n", value);
4636 	ar->wmi.cmd = &wmi_tlv_cmd_map;
4637 	ar->wmi.vdev_param = &wmi_tlv_vdev_param_map;
4638 	ar->wmi.pdev_param = &wmi_tlv_pdev_param_map;
4639 	ar->wmi.peer_param = &wmi_tlv_peer_param_map;
4640 	ar->wmi.ops = &wmi_tlv_ops;
4641 	ar->wmi.peer_flags = &wmi_tlv_peer_flags_map;