Lines Matching refs:speed
5943 * i40e_get_link_speed - Returns link speed for the interface
5999 int speed = 0;
6002 speed = i40e_get_link_speed(vsi);
6003 if (max_tx_rate > speed) {
7277 char *speed = "Unknown";
7297 /* Warn user if link speed on NPAR enabled partition is not at
7304 "The partition detected link speed that is less than 10Gbps\n");
7308 speed = "40 G";
7311 speed = "20 G";
7314 speed = "25 G";
7317 speed = "10 G";
7320 speed = "5 G";
7323 speed = "2.5 G";
7326 speed = "1000 M";
7329 speed = "100 M";
7378 speed, req_fec, fec, an, fc);
7397 speed, req_fec, fec, an, fc);
7401 speed, fc);
7484 u8 speed;
7488 * and applications, which causes incorrect speed values being
7489 * set on startup. In order to clear speed registers, we call
7502 speed = abilities.link_speed;
7516 * and its speed values are OK, no need for a flap
7544 config.link_speed = speed;
10961 * is not supported with new link speed
16074 char speed[PCI_SPEED_SIZE] = "Unknown";
16077 /* Get the negotiated link width and speed from PCI config
16085 switch (hw->bus.speed) {
16087 strscpy(speed, "8.0", PCI_SPEED_SIZE); break;
16089 strscpy(speed, "5.0", PCI_SPEED_SIZE); break;
16091 strscpy(speed, "2.5", PCI_SPEED_SIZE); break;
16109 speed, width);
16112 hw->bus.speed < i40e_bus_speed_8000) {