Lines Matching refs:write
251 * spi_nor_spimem_write_data() - write data to flash memory via
254 * @to: offset to write to
255 * @len: number of bytes to write
293 * spi_nor_write_data() - write data to flash memory
295 * @to: offset to write to
296 * @len: number of bytes to write
307 return nor->controller_ops->write(nor, to, len, buf);
330 * spi_nor_write_any_volatile_reg() - write any volatile register to flash
357 * spi_nor_write_enable() - Set write enable latch with Write Enable command.
790 * @sr: pointer to DMA-able buffer to write to the Status Register.
791 * @len: number of bytes to write to the Status Register.
1001 * @sr2: pointer to DMA-able buffer to write to the Status Register 2.
2168 !nor->controller_ops->write ||
2630 "can't select write settings supported by both the SPI controller and memory.\n");
3167 * Some SPI NOR flashes are write protected by default after a power-on
3172 * unlock the entire flash array only when the software write
3432 /* Unset BIT_WRITEABLE to enable JFFS2 write buffer for ECC'd NOR */
3495 * We need the bounce buffer early to read/write registers when going