message/fusion/mptbase.c

95 		 " Enable MSI Support for SAS controllers (default=0)");
415 	} else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
545 		else if (ioc->bus_type == SAS)
1935 		ioc->bus_type = SAS;
1941 		ioc->bus_type = SAS;
1948 	case SAS:
2220 	 * Errata workaround for SAS pci express:
2226 	if (ioc->bus_type == SAS && (pdev->device ==
2260 	     ioc->bus_type != SAS))
2554 		case SAS:
3299 	max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3478 	if (ioc->ir_firmware || ioc->bus_type == SAS) {
3797 	} else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3825 	if (ioc->bus_type == SAS) {
3840 			if (ioc->bus_type == SAS) {
4393 	else if (ioc->bus_type == SAS)
5045  *	mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
6679 				if (!sas++) drvname = "SAS host";
7353 			    "SAS Device Status Change: Added: "
7358 			    "SAS Device Status Change: Deleted: "
7363 			    "SAS Device Status Change: SMART Data: "
7368 			    "SAS Device Status Change: No Persistency: "
7373 			    "SAS Device Status Change: Unsupported Device "
7378 			    "SAS Device Status Change: Internal Device "
7383 			    "SAS Device Status Change: Internal Task "
7388 			    "SAS Device Status Change: Internal Abort "
7393 			    "SAS Device Status Change: Internal Clear "
7398 			    "SAS Device Status Change: Internal Query "
7403 			    "SAS Device Status Change: Unknown: "
7424 		ds = "SAS SES Event";
7438 			   "SAS PHY Link Status: Phy=%d:"
7443 			   "SAS PHY Link Status: Phy=%d:"
7448 			   "SAS PHY Link Status: Phy=%d:"
7453 			   "SAS PHY Link Status: Phy=%d:"
7458 			   "SAS PHY Link Status: Phy=%d:"
7463 			   "SAS PHY Link Status: Phy=%d:"
7468 			   "SAS PHY Link Status: Phy=%d:"
7473 			   "SAS PHY Link Status: Phy=%d", PhyNumber);
7479 		ds = "SAS Discovery Error";
7559 			ds = "SAS Discovery: Start";
7561 			ds = "SAS Discovery: Stop";
7565 		ds = "SAS Log Entry Added";
7575 		    "SAS Broadcast Primitive: phy=%d port=%d "
7587 			ds = "SAS Initiator Status Change: Added";
7590 			ds = "SAS Initiator Status Change: Deleted";
7593 			ds = "SAS Initiator Status Change";
7605 		    "SAS Initiator Device Table Overflow: max initiators=%02d "
7618 			    "SAS SMP Error: port=%d result=0x%02x",
7622 			    "SAS SMP Error: port=%d : CRC Error",
7626 			    "SAS SMP Error: port=%d : Timeout",
7630 			    "SAS SMP Error: port=%d : No Destination",
7634 			    "SAS SMP Error: port=%d : Bad Destination",
7638 			    "SAS SMP Error: port=%d : status=0x%02x",
7917 		"Invalid SAS Address",				/* 01h */
8054  *	mpt_sas_log_info - Log information returned from SAS IOC.
8079 	if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8279 /*  SCSIIO Reply (SPI, FCP, SAS) initiator values                           */
8421 		desc = "SAS: SMP Request Failed";
8425 		desc = "SAS: SMP Data Overrun";