message/fusion/mptbase.c

3693 	CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3702 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3703 	CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3706 		diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3735 	CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3798 		diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3799 		CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3813 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3820 	CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3874  *	via the Diagnostic register.
3916 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3950  *	via the Diagnostic register. Adapter should be in ready state
4020 	/* Use "Diagnostic reset" method! (only thing available!) */
4021 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4025 			diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4054 				printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4060 			diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4068 				diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4076 		CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4080 		 * Now hit the reset bit in the Diagnostic register
4083 		CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4085 		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4117 				diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4170 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4173 			diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4181 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4203 			printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4207 		diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4210 	CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4211 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4217 	/* Disable Diagnostic Mode
4223 	diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4225 		printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4232 			diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);