Lines Matching defs:on
628 * [7] internal frequency doublers: on
641 * COMI[5] "Banding filter on off"
703 * on power down"
706 * HREF, and CHSYNC pins on
760 * on off depending on
787 * = 0 (0x00) ...0.... "Data valid on falling edge"
1136 * CLKRC[7] "Internal frequency doublers on off seclection"
1312 /* 0x28: 0x05 Selects RGB format if RGB on */
1335 /* Toggle 0x12[2] off and on here? */
2134 value &= mask; /* Enforce mask on value */
2400 /* Up on sensor reset empty the register cache */
2453 value &= mask; /* Enforce mask on value */
2532 * is synchronized. Returns <0 on failure.
2823 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
2824 static void ov51x_led_control(struct sd *sd, int on)
2827 on = !on;
2832 reg_w(sd, R511_SYS_LED_CTL, on);
2836 reg_w_mask(sd, R518_GPIO_OUT, 0x02 * on, 0x02);
2839 reg_w_mask(sd, OV519_GPIO_DATA_OUT0, on, 1);
3064 /* First 5 bits of custom ID reg are a revision ID on OV518 */
3503 /* YUV420, low pass filter on */
3661 /* 0x51: Clock divider; Only works on some cams which use 2 crystals */
3670 * HdG: 640x480 needs special handling on device
3882 case SEN_OV7670: /* guesses, based on 7640 */
3973 i2c_w_mask(sd, 0x28, 0x20, 0x20); /* progressive mode on */
4334 * 2: snapshot button on
4749 case 1: /* 50 hz (filter on and framerate adj) */
4760 case 2: /* 60 hz (filter on, ...) */