media/dvb-frontends/mb86a16.c

19 static unsigned int verbose = 5;
20 module_param(verbose, int, 0644);
59 #define TRACE_IN	dprintk(verbose, MB86A16_DEBUG, 1, "-->()")
60 #define TRACE_OUT	dprintk(verbose, MB86A16_DEBUG, 1, "()-->")
74 	dprintk(verbose, MB86A16_DEBUG, 1,
104 		dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=%i)",
130 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
157 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
168 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
184 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
200 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
213 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
226 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
268 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
281 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
298 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
323 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
337 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
411 			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
416 			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
432 			dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
444 		dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
519 		dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error");
548 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
567 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
604 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
617 	dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val);
623 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
711 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
948 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
959 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
969 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
979 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
989 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1041 	dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate);
1068 			dprintk(verbose, MB86A16_ERROR, 1, "initial set failed");
1072 			dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
1076 			dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
1080 			dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
1084 			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error");
1088 			dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
1093 			dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error");
1166 				dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
1171 				dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
1175 				dprintk(verbose, MB86A16_ERROR, 1, "srst error");
1181 				dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1193 					dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j);
1197 				dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
1205 					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
1209 					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
1214 					dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****");
1217 					dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again...");
1220 						dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
1246 			dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check");
1254 				dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
1259 				dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
1263 				dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
1267 				dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
1272 				dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error");
1276 				dprintk(verbose, MB86A16_ERROR, 1, "srst error");
1294 				dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
1298 				dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
1303 				dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
1310 					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
1314 					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
1328 					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
1332 					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
1349 					dprintk(verbose, MB86A16_ERROR, 1, "rf val set");
1353 					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
1367 			dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq);
1369 			dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
1371 				dprintk(verbose, MB86A16_INFO, 1, "NO  --  SIGNAL !");
1381 					dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
1385 					dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
1391 					dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
1395 					dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
1399 					dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
1404 					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
1408 					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
1412 					dprintk(verbose, MB86A16_ERROR, 1, "srst error");
1420 					dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1447 				dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync);
1471 					dprintk(verbose, MB86A16_INFO, 1, "NO  -- SYNC");
1477 			dprintk(verbose, MB86A16_INFO, 1, "NO  -- SIGNAL");
1483 			dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******");
1491 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1494 		dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval);
1539 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1568 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1601 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1614 		dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK");
1618 	dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!");
1660 		dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber);
1680 			dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
1696 			dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
1701 	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1712 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1717 	dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength);
1761 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
1772 	dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level);
1784 		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");