Lines Matching defs:these
98 /* these are variables for documentation and experimentation purposes */
367 /* these are the error bits in the tid flows, and are W1C */
424 /* these are the (few) counters that are not port-specific */
632 * these 5 fields are used to establish deltas for IB symbol
1061 * All of these potentially need to have a buffer disarmed
1106 * All of these are "per port", so renamed:
1349 u64 these, lmask;
1355 these = (errs & msp->mask);
1356 lmask = (these & (these - 1)) ^ these;
1647 /* do these first, they are most important */
2303 * Set up per-VL credits. Below is kluge based on these assumptions:
2441 /* always enable these on driver reload, not sticky */
4493 /* Write these registers before the context is enabled. */
4547 /* Now that the context is disabled, clear these registers. */
5668 * these are in their canonical positions (e.g. lsb of
5750 /* these may be adjusted in init_chip_wc_pat() */
6205 * Some of these should be redundant on reset, but play safe.
6257 * Some of these should be redundant on reset, but play safe.
6326 val = TIDFLOW_ERRBITS; /* these are W1C */
6385 /* now that piobcnt2k and 4k set, we can allocate these */
6416 * we need these to do initial chip register accesses.
6427 /* link_recovery setup causes these errors, so ignore them,
7857 /* setup LoS params; these are subsystem, so chan == 5 */
7991 /* setup LoS params; these are subsystem, so chan == 5 */
8313 /* these are common for all IB port use cases. */