Lines Matching refs:voltage
136 /* safe frequency we can use at minimum voltage */
183 * Determine DFS_COEFF for the requested voltage. Always select external
184 * calibration override equal to the voltage, and set maximum detection
186 * voltage increases).
198 /* coeff = slope * voltage + offset */
476 clk->new_uv = volt->vid[cstate->voltage].uv;
485 * Compute PLL parameters that are always safe for the current voltage
586 * 1. If voltage is increasing:
592 * 2. If voltage is decreasing:
598 * i.e., it is low enough to be safe at any voltage in operating range
606 /* voltage will raise: safe frequency is current one */
609 /* voltage will drop: safe frequency is new one */
621 * - Set calibration level to new voltage
622 * - Set DVFS coefficient to match new voltage
642 .voltage = 0,
648 .voltage = 1,
654 .voltage = 2,
660 .voltage = 3,
666 .voltage = 4,
672 .voltage = 5,
678 .voltage = 6,
684 .voltage = 7,
690 .voltage = 8,
696 .voltage = 9,
702 .voltage = 10,
708 .voltage = 11,
714 .voltage = 12,
855 /* Get current voltage */
986 /* find lowest voltage we can use */
995 /* find max frequency at this voltage */
997 if (pstates[i].base.voltage == id)