drm/mcde/mcde_dsi.c

87 		dev_err(d->dev, "direct command ACK ERR received\n");
89 		dev_err(d->dev, "direct command read ERR received\n");
103 		dev_err(d->dev, "CMD mode SD1 underrun\n");
105 		dev_err(d->dev, "CMD mode SD2 underrun\n");
107 		dev_err(d->dev, "CMD mode unwanted RD\n");
126 		dev_err(d->dev, "VID mode missing data\n");
128 		dev_err(d->dev, "VID mode missing HSYNC\n");
130 		dev_err(d->dev, "VID mode missing VSYNC\n");
132 		dev_err(d->dev, "VID mode less bytes than expected between two HSYNC\n");
134 		dev_err(d->dev, "VID mode less lines than expected between two VSYNC\n");
138 		dev_err(d->dev, "VID mode read/write error\n");
140 		dev_err(d->dev, "VID mode received packets differ from expected size\n");
142 		dev_err(d->dev, "VID mode VSG in recovery mode\n");
236 			dev_err(d->dev, "DSI read timeout!\n");
249 			dev_err(d->dev, "DSI write timeout!\n");
256 		dev_err(d->dev, "read completed with error\n");
262 		dev_err(d->dev, "error during transmission: %04x\n",
280 			dev_err(d->dev, "read error, requested %zd got %d\n",
307 		dev_err(d->dev,
312 		dev_err(d->dev,
374 		dev_err(d->dev, "gave up after %d retries\n", retries);
471 		dev_err(d->dev, "unknown pixel mode\n");
634 			dev_err(d->dev, "blkline_pck too big %d bytes\n",
683 			dev_err(d->dev, "video block does not fit on line!\n");
684 			dev_err(d->dev,
687 			dev_err(d->dev,
690 			dev_err(d->dev,
880 		dev_err(d->dev, "failed to set LP clock rate %lu Hz\n",
886 		dev_err(d->dev, "failed to set HS clock rate %lu Hz\n",
892 		dev_err(d->dev, "failed to enable LP clock\n");
898 		dev_err(d->dev, "failed to enable HS clock\n");
965 		dev_err(d->dev, "no DSI device attached to encoder!\n");
1057 		dev_err(d->dev, "we need atomic updates\n");
1093 		dev_err(dev, "unable to get HS clock\n");
1099 		dev_err(dev, "unable to get LP clock\n");
1107 			dev_err(dev, "failed to find panel try bridge (%ld)\n",
1113 				dev_err(dev, "failed to find bridge\n");
1123 			dev_err(dev, "error adding panel bridge\n");
1133 		dev_err(dev, "no panel or bridge\n");
1186 		dev_err(dev, "no PRCMU regmap\n");
1202 		dev_err(dev, "failed to register DSI host: %d\n", ret);