drivers/atm/fore200e.c

68 #define DPRINTK(level, format, args...)  do { if (CONFIG_ATM_FORE200E_DEBUG >= (level)) \
71 #define DPRINTK(level, format, args...)  do {} while (0)
456 	DPRINTK(2,"FIFO OUT full, device %d\n", fore200e->atm_dev->number);
482     DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
491     DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base);
506     DPRINTK(2, "device %s being unmapped from memory\n", fore200e->name);
518     DPRINTK(2, "device %s being configured\n", fore200e->name);
682 	DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base);
786 	DPRINTK(3, "TX COMPLETED: entry = %p [tail = %d], vc_map = %p, skb = %p\n",
802 	    DPRINTK(1, "no ready vcc found for PDU sent on device %d\n",
825 		DPRINTK(1, "vcc closed-then-re-opened; dropping PDU sent on device %d\n",
920 		DPRINTK(2, "supplying %d rx buffers to queue %d / %d, freebuf_count = %d\n",
993 	DPRINTK(2, "unable to alloc new skb, rx PDU length = %d\n", pdu_len);
1024     DPRINTK(3, "rx skb: len = %d, truesize = %d\n", skb->len, skb->truesize);
1035 	DPRINTK(2, "receive buffers saturated for %d.%d.%d - PDU dropped\n",
1105 	    DPRINTK(1, "no ready VC found for PDU received on %d.%d.%d\n",
1118 		DPRINTK(2, "damaged PDU on %d.%d.%d\n",
1162 	DPRINTK(3, "interrupt NOT triggered by device %d\n", fore200e->atm_dev->number);
1165     DPRINTK(3, "interrupt triggered by device %d\n", fore200e->atm_dev->number);
1186     DPRINTK(3, "tx tasklet scheduled for device %d\n", fore200e->atm_dev->number);
1200     DPRINTK(3, "rx tasklet scheduled for device %d\n", fore200e->atm_dev->number);
1215     DPRINTK(1, "VC %d.%d.%d uses buffer scheme %d\n",
1278     DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci,
1339     DPRINTK(2, "opening %d.%d.%d:%d QoS = (tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; "
1392 	DPRINTK(3, "tx on %d.%d.%d:%d, tx PCR = %d, rx PCR = %d, data_cells = %u, idle_cells = %u\n",
1426     DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal));
1497 	DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi);
1508 	DPRINTK(3, "user-supplied cell header = 0x%08x\n", *cell_header);
1519 	DPRINTK(2, "misaligned tx PDU on device %s\n", fore200e->name);
1527 	DPRINTK(2, "incomplete tx AAL0 PDU on device %s\n", fore200e->name);
1579 	    DPRINTK(2, "tx queue of device %s is saturated, PDU dropped - heartbeat is %08x\n",
1618     DPRINTK(3, "tx on %d.%d.%d:%d, len = %u (%u)\n",
1760     DPRINTK(2, "set OC-3 reg = 0x%02x, value = 0x%02x, mask = 0x%02x\n", reg, value, mask);
1858     DPRINTK(2, "ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg);
1889 	DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi);
1893     DPRINTK(2, "change_qos %d.%d.%d, "
1997 	    DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn);
2057 	    DPRINTK(2, "buffer supply queue %d / %d is being initialized\n", scheme, magn);
2115     DPRINTK(2, "receive queue is being initialized\n");
2174     DPRINTK(2, "transmit queue is being initialized\n");
2236     DPRINTK(2, "command queue is being initialized\n");
2290     DPRINTK(2, "device %s being initialized\n", fore200e->name);
2411     DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n",
2422     DPRINTK(2, "device %s firmware being started\n", fore200e->name);
2452     DPRINTK(2, "device %s being registered\n", fore200e->name);