media-add-ons/radeon/Theater200.cpp

31 	PRINT(("CTheater200::CTheater200()\n"));
44 			PRINT(("CTheater200::CTheater200() - Unsupported crystal clock!\n"));
51 		PRINT(("CTheater200::CTheater200() - Rage Theater not found!\n"));
59 	PRINT(("CTheater200::~CTheater200()\n"));
73 		PRINT(("CTheater200::InitCheck() fPort Failed\n"));
80 		PRINT(("CTheater200::InitCheck() Invalid VIP Channel\n"));
87 	PRINT(("CTheater200::InitCheck() Sucess\n"));
93 	PRINT(("CTheater200::Reset()\n"));
119 		PRINT(("Cannot open microcode file\n"));
127 			PRINT(("Cannot read header from file: %s\n", micro_path));
131 		PRINT(("Microcode: num_seg: %x\n", microc_headp->num_seg));
143 				PRINT(("Cannot allocate memory\n"));
152 				PRINT(("Cannot read segment from microcode file: %s\n", micro_path));
159 				PRINT(("cannot allocate memory\n"));
163 			PRINT(("Microcode: segment number: %x\n", i));
164 			PRINT(("Microcode: curr_seg->num_bytes: %x\n", curr_seg->num_bytes));
165 			PRINT(("Microcode: curr_seg->download_dst: %x\n", curr_seg->download_dst));
166 			PRINT(("Microcode: curr_seg->crc_val: %x\n", curr_seg->crc_val));
184 				PRINT(("Cannot read segment data\n"));
208 			PRINT(("Cannot read header from file: %s\n", micro_path));
212 		PRINT(("Microcode: num_seg: %x\n", microc_headp->num_seg));
222 				PRINT(("Cannot allocate memory\n"));
236 				PRINT(("Cannot read segment from microcode file: %s\n", micro_path));
243 				PRINT(("cannot allocate memory\n"));
247 			PRINT(("Microcode: segment number: %x\n", i));
248 			PRINT(("Microcode: curr_seg->num_bytes: %x\n", curr_seg->num_bytes));
249 			PRINT(("Microcode: curr_seg->download_dst: %x\n", curr_seg->download_dst));
250 			PRINT(("Microcode: curr_seg->crc_val: %x\n", curr_seg->crc_val));
270 					PRINT(("Cannot read from file\n"));
284 		PRINT(("File type %s unknown\n", micro_type));
327 	PRINT(("CTheater200::Dsp_Init()\n"));
342 	PRINT(("Microcode: dsp_init: channel 14 available\n"));
358 	PRINT(("Microcode: before everything: %x\n", data8));
361 		PRINT(("Microcode: FIFO status0: %x\n", data8));
364 		PRINT(("Microcode: error reading FIFO status0\n"));
370 		PRINT(("Microcode: FIFO status1: %x\n", data8));
373 		PRINT(("Microcode: error reading FIFO status1\n"));
399 		PRINT(("Microcode: Loading first segment\n"));
403 			PRINT(("Microcode: write to FIFOD failed\n"));
415 			PRINT(("Microcode: channel 14 timeout\n"));
419 		PRINT(("Microcode: dsp_load: checkpoint 1\n"));
420 		PRINT(("Microcode: TC_STATUS: %x\n", data));
435 			PRINT(("Microcode: channel 14 timeout\n"));
438 		PRINT(("Microcode: dsp_load: checkpoint 2\n"));
439 		PRINT(("Microcode: TC_STATUS: %x\n", data));
446 		PRINT(("Microcode: dsp_load: checkpoint 3\n"));
447 		PRINT(("Microcode: TC_STATUS: %x\n", data));
455 		PRINT(("Microcode: dsp_load: checkpoint 4\n"));
462 		PRINT(("Microcode: Download of boot degment failed\n"));
466 	PRINT(("Microcode: Download of boot code succeeded\n"));
485 				PRINT(("Microcode: write to FIFOD failed\n"));
503 			PRINT(("Microcode: DSP failed to move seg: %x from data to code memory\n", seg_id));
507 		PRINT(("Microcode: segment: %x loaded\n", seg_id));
521 			PRINT(("Microcode: DSP failed to move seg: %x from data to code memory\n", seg_id));
526 	PRINT(("Microcode: download complete\n"));
538 		PRINT(("Microcode: DSP microcode successfully loaded\n"));
541 		PRINT(("Microcode: DSP microcode UNsuccessfully loaded\n"));
642 		PRINT(("Microcode: Use default microcode path: %s\n", DEFAULT_MICROC_PATH));
646 		PRINT(("Microcode: Use microcode path: %s\n", microcode_path));
652 		PRINT(("Microcode: Use default microcode type: %s\n", DEFAULT_MICROC_TYPE));
656 		PRINT(("Microcode: Use microcode type: %s\n", microcode_type));
678 		PRINT(("Microcode: cannot load microcode\n"));
683 		PRINT(("Microcode: device_id: %x\n", microc_data.microc_head.device_id));
684 		PRINT(("Microcode: vendor_id: %x\n", microc_data.microc_head.vendor_id));
685 		PRINT(("Microcode: rev_id: %x\n", 	 microc_data.microc_head.revision_id));
686 		PRINT(("Microcode: num_seg: %x\n", 	 microc_data.microc_head.num_seg));
691 		PRINT(("Microcode: dsp_init failed\n"));
696 		PRINT(("Microcode: dsp_init OK\n"));
701 		PRINT(("Microcode: dsp_download failed\n"));
706 		PRINT(("Microcode: dsp_download OK\n"));
761 	PRINT(("dsp_set_videostreamformat: %x\n", result));
776 	PRINT(("dsp_get_signallockstatus: %x, h_pll: %x, v_pll: %x\n", \
786 	PRINT(("CTheater200::SetEnable(%d, %d)\n", enable, vbi));
808 	PRINT(("CTheater200::SetStandard(%s, %s)\n",
820 	PRINT(("CTheater200::SetSize(%d, %d)\n", hactive, vactive));
828 	PRINT(("CTheater200::SetDeinterlace(%d)\n", deinterlace));
840 	PRINT(("CTheater200::SetSharpness(%d)\n", sharpness));
848 	PRINT(("CTheater200::SetBrightness(%d)\n", brightness));
856 	PRINT(("CTheater200::SetContrast(%d)\n", contrast));
864 	PRINT(("CTheater200::SetSaturation(%d)\n", saturation));
872 	PRINT(("CTheater200::SetHue(%d)\n", hue));
885 	PRINT(("CTheater200::SetADC(%c, %c)\n", "NJ4MNCB6S"[standard], "TCS"[source]));
910 		PRINT(("CTheater200::SetADC() - Bad standard\n"));
915 	PRINT(("VIP_GPIO_CNTL: %x\n", data));
918 	PRINT(("VIP_GPIO_INOUT: %x\n", data));
965 		PRINT(("CTheater200::SetADC() - Bad source\n"));
971 	PRINT(("VIP_GPIO_CNTL: %x\n", data));
974 	PRINT(("VIP_GPIO_INOUT: %x\n", data));
994 	PRINT(("CTheater200::WaitHSYNC() - wait for HSync locking time out!\n"));
1008 	PRINT(("CTheater200::WaitVSYNC() - wait for VBI timed out!\n"));
1022 	PRINT(("dsp_set_contrast: %x\n", result));
1027 	PRINT(("dsp_set_brightness: %x\n", result));
1047 	PRINT(("dsp_set_saturation: %x\n", saturation));
1048 	PRINT(("dsp_set_tint: %x\n", hue));
1144 	PRINT(("dsp_audio_mute: %x\n", result));
1160 	PRINT(("dsp_set_audio_volume: %x\n", result));
1176 	PRINT(("dsp_configure_i2s_port: %x\n", result));
1191 	PRINT(("dsp_configure_spdif_port: %x\n", result));
1216 	PRINT(("dsp_get_signallinenumber: %x, linenum: %x\n", \
1225 	PRINT(("<<< Rage Theater Registers >>>\n"));
1228 		PRINT(("REG_0x%04x = 0x%08x\n", index, value));