Lines Matching refs:uint8

20 	uint8	checksum;				/* checksum of bytes 0-19 (per ACPI 1.0) */
22 uint8 revision; /* 0 = ACPI 1.0, 2 = ACPI 3.0 */
28 uint8 checksum; /* checksum of bytes 0-19 (per ACPI 1.0) */
30 uint8 revision; /* 0 = ACPI 1.0, 2 = ACPI 3.0 */
34 uint8 extended_checksum; /* including entire table */
35 uint8 reserved[3];
43 uint8 revision;
44 uint8 checksum; /* checksum of entire table */
78 uint8 type;
79 uint8 length;
83 uint8 type; /* 0 = processor local APIC */
84 uint8 length; /* 8 bytes */
85 uint8 acpi_processor_id;
86 uint8 apic_id; /* the id of this APIC */
91 uint8 type; /* 1 = I/O APIC */
92 uint8 length; /* 12 bytes */
93 uint8 io_apic_id; /* the id of this APIC */
94 uint8 reserved;
100 uint8 type; /* 2 = Interrupt source override */
101 uint8 length; /* 10 bytes */
102 uint8 bus; /* 0 = ISA */
103 uint8 source; /* Bus-relative interrupt source (IRQ) */
111 uint8 type; /* 3 = NMI */
112 uint8 length; /* 8 bytes */
120 uint8 type; /* 4 = local APIC NMI */
121 uint8 length; /* 6 bytes */
122 uint8 acpi_processor_id; /* Processor ID corresponding to processor
127 uint8 local_interrupt; /* Local APIC interrupt input LINTn to which
132 uint8 type; /* 5 = local APIC address override */
133 uint8 length; /* 12 bytes */
140 uint8 type; /* 6 = I/0 SAPIC (should be used if it
143 uint8 length; /* 16 bytes */
144 uint8 io_apic_id; /* the id of this SAPIC */
145 uint8 reserved; /* reserved (must be set to zero) */
153 uint8 type; /* 7 = processor local SAPIC */
154 uint8 length; /* n bytes */
155 uint8 acpi_processor_id;
156 uint8 local_sapic_id;
157 uint8 local_sapic_eid;
158 uint8 reserved1; /* reserved (must be set to zero) */
159 uint8 reserved2; /* reserved (must be set to zero) */
160 uint8 reserved3; /* reserved (must be set to zero) */
170 uint8 type; /* 8 = platform interrupt source */
171 uint8 length; /* 16 bytes */
174 uint8 interrupt_type; /* 1 PMI, 2 INIT, 3 Corrected Platform
176 uint8 processor_id; /* processor ID of destination */
177 uint8 processor_eid; /* processor EID of destination */
178 uint8 io_sapic_vector; /* value that must be used to program the
188 uint8 type; /* 9 = processor local x2APIC */
189 uint8 length; /* 16 bytes */
198 uint8 type; /* 0xA = local x2APIC NMI */
199 uint8 length; /* 12 bytes */
205 uint8 local_interrupt; /* Local x2APIC interrupt input LINTn to
207 uint8 reserved1; /* reserved (must be set to zero) */
208 uint8 reserved2; /* reserved (must be set to zero) */
209 uint8 reserved3; /* reserved (must be set to zero) */
213 uint8 type;
214 uint8 length;
228 uint8 efficiency_class;
229 uint8 reserved2;
234 uint8 type;
235 uint8 length;
240 uint8 gic_version;
241 uint8 reserved[3];
245 uint8 address_space_id;
246 uint8 bit_width;
247 uint8 bit_offset;
248 uint8 access_size;
255 uint8 reserved[8];
262 uint8 start_bus_number;
263 uint8 end_bus_number;
271 uint8 interrupt_type;
272 uint8 irq;
274 uint8 baud;
275 uint8 parity;
276 uint8 stop_bits;
277 uint8 flow_control;
278 uint8 terminal_type;
279 uint8 language;
282 uint8 pci_bus_num;
283 uint8 pci_vendor_num;
284 uint8 pci_function_num;
286 uint8 pci_segment;
301 uint8 index;
307 uint8 write_protect;
313 uint8 write_protect;
314 uint8 caching;
315 uint8 range_type;
316 uint8 translation;
320 uint8 range_type;
321 uint8 translation;
322 uint8 translation_type;
323 uint8 reserved1;
329 uint8 type_specific;
357 uint8 resource_type;
358 uint8 producer_consumer;
359 uint8 decode;
360 uint8 minAddress_fixed;
361 uint8 maxAddress_fixed;
366 uint8 resource_type;
367 uint8 producer_consumer;
368 uint8 decode;
369 uint8 minAddress_fixed;
370 uint8 maxAddress_fixed;
377 uint8 resource_type;
378 uint8 producer_consumer;
379 uint8 decode;
380 uint8 minAddress_fixed;
381 uint8 maxAddress_fixed;
388 uint8 resource_type;
389 uint8 producer_consumer;
390 uint8 decode;
391 uint8 minAddress_fixed;
392 uint8 maxAddress_fixed;
399 uint8 producer_consumer;
400 uint8 triggering;
401 uint8 polarity;
402 uint8 shareable;
403 uint8 wake_capable;
404 uint8 interrupt_count;