ncurses/misc/terminfo.tmp

450 # ansi-mtabs adds relative addressing and minimal tab support
656 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
676 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
807 # have the eat_newline_glitch.  It doesn't support setting or removing tab
1154 #	control-tab	\[072q
1853 # tab settings are in non-volatile memory and don't need to be
2261 # Things that use <knxt> usually use tab anyways... and things that don't use
2262 # tab usually use <knxt> instead...
2263 # kprv is same as tab - Backtab is useless...
3292 #	vt100 TBC (tab reset) is not implemented.
3313 # operations.  Shift-tab generates a distinct sequence so it can be argued
4722 #   tbc   [clear tab stops] not implemented
4732 #   kcbt  [back-tab key] not implemented in cygwin?  \E[Z
5961 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
9402 	lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10505 #	transmit/do not transmit page tab stops tabs to host*
10506 #	transmit/do not transmit column tab stop tabs to host*
10549 #	page/column tab stops*
10973 #           the delay times and do an auto tab set rather than the indirect
11178 # of the tab key to send an ESC.  The real ESC key is positioned way out
12995 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
13529 #ctrl-I          Horiz tab
13577 #ESC 1           set tab
13578 #ESC 2           clear tab at cursor
13615 #ESC I           back tab
13711 #ESC i           tab
15547 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
15959 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
16721 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
17139 #	RM column tab mode:		^[[18l
17512 #	TBC tab clear (at cursor pos.)	^[[g
17513 #	TBI tab initialize 		^[[N
17514 #	TBS tab set (at cursor pos.)	^[p
17644 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
17762 # \E[2g		clear all tab stops
17766 # \E[4g		clear vertical tab stops
17768 # \E[%i%p1%du	set tab stop at column %d (origin == 1)
17770 #		a tab stop)
18525 # The tab 132 uses xon/xoff, so no padding needed.
18531 tab132|tab|tab132-15|tab 132/15,
19097 # If no tab is set or the terminal's in a bad mood, it glitches the screen
19102 # and cursor addressing sends a tab for row/column 9.  What a losing terminal!
19104 # least one line with no tabs in it, and once you tab through that line,
19395 # CHT  Cursor Horizontal Tab     \E [ Pn I           1         eF     tab (C)
19558 # (C) CHT corresponds to terminfo (tab).  Usually it has the value ^I.
19568 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
19569 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
19845 #	CSI <n>Z	(cbt)	back up n tab stops
19870 #	CSI H		(hts)	(hts) set tab stop
20400 #	* Changed all DEC VT300 and up terminals to use VT300 tab set