dev/e1000/e1000_ich8lan.c

103 					   u16 *speed, u16 *duplex);
518 	/* bus type/speed/width */
637  *  to get the current speed/duplex if link exists.
661 	 * link.  If so, then we want to get the current speed/duplex
728 	 * If we are forcing speed/duplex, then we simply return since
738 	 * of MAC speed/duplex configuration.  So we only need to
1223  *  from a lower speed.  This workaround disables K1 whenever link is at 1Gig
1827 	/* Set K1 beacon duration based on 1Gbps speed or otherwise */
2028  *  the phy speed. This function will manually set the LPLU bit and restart
2063  *  activating LPLU this function also disables smart speed
2092 		 * Call gig speed drop workaround on LPLU before accessing
2160  *  activating LPLU this function also disables smart speed
2228 		 * Call gig speed drop workaround on LPLU before accessing
3680  *  e1000_get_link_up_info_ich8lan - Get current link speed and duplex
3682  *  @speed: pointer to store current link speed
3689 static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
3696 	ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, duplex);
3702 	    (*speed == SPEED_1000)) {
3715  *  On link status change (i.e. PCI reset, speed change) and link is up and
3716  *  speed is gigabit-
3723  *  Note: this is only called for IGP3 copper when speed is 1gb.
3776 	 * Call gig speed drop workaround on Gig disable before accessing
3843 		 * Call gig speed drop workaround on Gig disable before
3915  *  instead of negotiating to a lower speed.  Before going to Sx, set
3916  *  'Gig Disable' to force link speed negotiation to a lower speed based on