Lines Matching refs:DEBUGOUT
769 DEBUGOUT("Soft resetting SGMII attached PHY...\n");
1001 DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
1011 DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
1069 DEBUGOUT("MNG configuration cycle has not completed.\n");
1138 DEBUGOUT("Error configuring flow control\n");
1289 DEBUGOUT("2500 Mbs, ");
1290 DEBUGOUT("Full Duplex\n");
1358 DEBUGOUT("PCI-E Master disable polling has failed.\n");
1363 DEBUGOUT("PCI-E Set completion timeout has failed.\n");
1365 DEBUGOUT("Masking off all interrupts\n");
1376 DEBUGOUT("Issuing a global reset to MAC\n");
1386 DEBUGOUT("Auto Read Done did not complete\n");
1420 DEBUGOUT("Error initializing identification LED\n");
1425 DEBUGOUT("Initializing the IEEE VLAN\n");
1432 DEBUGOUT("Zeroing the MTA\n");
1437 DEBUGOUT("Zeroing the UTA\n");
1503 DEBUGOUT("Error resetting the PHY.\n");
1606 DEBUGOUT("NVM Read Error\n");
1823 DEBUGOUT("PHY module has not been recognized\n");
1852 DEBUGOUT("NVM Read Error\n");
1897 DEBUGOUT("Running reset init script for 82575\n");
2098 DEBUGOUT("Queue disable timed out after 10ms\n");
2359 DEBUGOUT("NVM Read Error\n");
2405 DEBUGOUT("PCI-E Master disable polling has failed.\n");
2407 DEBUGOUT("Masking off all interrupts\n");
2446 DEBUGOUT("Auto Read Done did not complete\n");
2458 DEBUGOUT("Could not reset MDICNFG based on EEPROM\n");
2510 DEBUGOUT("NVM Read Error\n");
2517 DEBUGOUT("NVM Checksum Invalid\n");
2547 DEBUGOUT("NVM Read Error while updating checksum.\n");
2556 DEBUGOUT("NVM Write Error while updating checksum.\n");
2581 DEBUGOUT("NVM Read Error\n");
2621 DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n");
2631 DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n");
2821 DEBUGOUT("Error committing the PHY changes\n");
2920 DEBUGOUT("Error committing the PHY changes\n");
2969 DEBUGOUT("LPI Clock Stop Bit should not be set!\n");
3258 DEBUGOUT("I2C byte read error - Retrying.\n");
3260 DEBUGOUT("I2C byte read error.\n");
3332 DEBUGOUT("I2C byte write error - Retrying.\n");
3334 DEBUGOUT("I2C byte write error.\n");
3490 DEBUGOUT("I2C ack was not received.\n");