dev/e1000/e1000_phy.c

317 		DEBUGOUT("MDI Read did not complete\n");
321 		DEBUGOUT("MDI Error\n");
383 		DEBUGOUT("MDI Write did not complete\n");
387 		DEBUGOUT("MDI Error\n");
440 		DEBUGOUT("I2CCMD Read did not complete\n");
444 		DEBUGOUT("I2CCMD Error bit set\n");
499 		DEBUGOUT("I2CCMD Write did not complete\n");
503 		DEBUGOUT("I2CCMD Error bit set\n");
532 		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
553 		DEBUGOUT("I2CCMD Read did not complete\n");
557 		DEBUGOUT("I2CCMD Error bit set\n");
587 		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
628 		DEBUGOUT("I2CCMD Write did not complete\n");
632 		DEBUGOUT("I2CCMD Error bit set\n");
1058 			DEBUGOUT("Error resetting the PHY.\n");
1177 				DEBUGOUT("Error committing the PHY changes\n");
1235 		DEBUGOUT("Error committing the PHY changes\n");
1327 			DEBUGOUT("Error committing the PHY changes\n");
1343 		DEBUGOUT("Error committing the PHY changes\n");
1372 		DEBUGOUT("Error resetting the PHY.\n");
1388 			DEBUGOUT("Error Disabling LPLU D3\n");
1397 			DEBUGOUT("Error Disabling LPLU D0\n");
1516 		DEBUGOUT("Advertise 10mb Half duplex\n");
1522 		DEBUGOUT("Advertise 10mb Full duplex\n");
1528 		DEBUGOUT("Advertise 100mb Half duplex\n");
1534 		DEBUGOUT("Advertise 100mb Full duplex\n");
1540 		DEBUGOUT("Advertise 1000mb Half duplex request denied!\n");
1544 		DEBUGOUT("Advertise 1000mb Full duplex\n");
1598 		DEBUGOUT("Flow control param set incorrectly\n");
1643 	DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
1646 		DEBUGOUT("Error Setting up Auto-Negotiation\n");
1649 	DEBUGOUT("Restarting Auto-Neg\n");
1669 			DEBUGOUT("Error while waiting for autoneg to complete\n");
1706 		DEBUGOUT("Forcing Speed and Duplex\n");
1709 			DEBUGOUT("Error Forcing Speed and Duplex\n");
1723 		DEBUGOUT("Valid link established!!!\n");
1727 		DEBUGOUT("Unable to establish link!!!\n");
1779 		DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n");
1787 			DEBUGOUT("Link taking longer than expected.\n");
1851 		DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n");
1877 				DEBUGOUT("Link taking longer than expected.\n");
1982 		DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n");
1990 			DEBUGOUT("Link taking longer than expected.\n");
2039 		DEBUGOUT("Half Duplex\n");
2043 		DEBUGOUT("Full Duplex\n");
2051 		DEBUGOUT("Forcing 100mb\n");
2055 		DEBUGOUT("Forcing 10mb\n");
2636 		DEBUGOUT("Phy info is only valid for copper media\n");
2645 		DEBUGOUT("Phy info is only valid if link is up\n");
2715 		DEBUGOUT("Phy info is only valid if link is up\n");
2777 		DEBUGOUT("Phy info is only valid if link is up\n");
2909 	DEBUGOUT("Running IGP 3 PHY init script\n");
3337 		DEBUGOUT("Could not set Port Control page\n");
3391 		DEBUGOUT("Could not set Port Control page\n");
3449 			DEBUGOUT("Could not enable PHY wakeup reg access\n");
3802 		DEBUGOUT("Could not write the Address Offset port register\n");
3813 		DEBUGOUT("Could not access the Data port register\n");
3923 		DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n");
3931 			DEBUGOUT("Link taking longer than expected.\n");
3964 		DEBUGOUT("Phy info is only valid if link is up\n");
4249 		DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n");