dev/ctau/ctddk.c

92 	/* init board structure */
124 	/* Load firmware and set up board */
147 	ct_setup_g703 (c->board);
184  * Configure Tau/E1 board.
208  * Config Tau/G.703 board
234 		c->board->opt.clk1 = clk;
236 		c->board->opt.clk0 = clk;
238 		ct_setup_e1 (c->board);
241 		ct_setup_g703 (c->board);
249 	return c->num ? c->board->opt.clk1 : c->board->opt.clk0;
257 		c->board->opt.s1 = ts;
259 		c->board->opt.s0 = ts;
260 	ct_setup_e1 (c->board);
278 	ct_setup_e1 (c->board);
291 	if (c->board->type != B_TAU_E1 && c->board->type != B_TAU_E1C &&
292 	    c->board->type != B_TAU2_E1)
295 	cte_out2 (c->board->port, c->num ? AM_IMR : AM_IMR | AM_A,
297 	cte_out2 (c->board->port, AM_MICR, MICR_MIE);
356 		if (c->num && c->board->opt.cfg == CFG_B)
361 		if (c->num && c->board->opt.cfg == CFG_B)
372 	ier0 = inb (IER0(c->board->port));
374 	outb (IER0(c->board->port), ier0);
404 		ier0 = inb (IER0(c->board->port));
406 		outb (IER0(c->board->port), ier0);
412 		ier0 = inb (IER0(c->board->port));
415 		outb (IER0(c->board->port), ier0);
417 		ier1 = inb (IER1(c->board->port));
420 		outb (IER1(c->board->port), ier1);
444 		ier0 = inb (IER0(c->board->port));
447 		outb (IER0(c->board->port), ier0);
449 		ier1 = inb (IER1(c->board->port));
452 		outb (IER1(c->board->port), ier1);
514 	if (on) c->board->bcr2 |=  (c->num ? BCR2_INVTXC1 : BCR2_INVTXC0);
515 	else	c->board->bcr2 &= ~(c->num ? BCR2_INVTXC1 : BCR2_INVTXC0);
516 	outb (BCR2(c->board->port), c->board->bcr2);
521 	return (c->board->bcr2 & (c->num ? BCR2_INVTXC1 : BCR2_INVTXC0)) != 0;
529 	if (on) c->board->bcr2 |=  (c->num ? BCR2_INVRXC1 : BCR2_INVRXC0);
530 	else	c->board->bcr2 &= ~(c->num ? BCR2_INVRXC1 : BCR2_INVRXC0);
531 	outb (BCR2(c->board->port), c->board->bcr2);
536 	return (c->board->bcr2 & (c->num ? BCR2_INVRXC1 : BCR2_INVRXC0)) != 0;
647 	bpv = inb (GERR (c->board->port)) & (c->num ? GERR_BPV1 : GERR_BPV0);
648 	outb (GERR (c->board->port), bpv);
650 	tsterr = inb (GERR (c->board->port)) & (c->num ? GERR_ERR1 : GERR_ERR0);
651 	outb (GERR (c->board->port), tsterr);
653 	tstreq = inb (GLDR (c->board->port)) &
655 	outb (GLDR (c->board->port), tstreq);
728 	port = c->num ? E1CS1(c->board->port) : E1CS0(c->board->port);