Lines Matching defs:pins
336 struct iicrb_pin_access pins;
340 * If we have gpio pinmux config, reconfigure the pins to gpio mode,
342 * recovery sequence if necessary, then configure the pins back to i2c
350 pins.ctx = sc;
351 pins.getsda = i2c_recover_getsda;
352 pins.setsda = i2c_recover_setsda;
353 pins.getscl = i2c_recover_getscl;
354 pins.setscl = i2c_recover_setscl;
355 err = iic_recover_bus(&pins);
409 * Set up for bus recovery using gpio pins, if the pinctrl and gpio
425 * Preset the gpio pins to output high (idle bus state). The signal
426 * won't actually appear on the pins until the bus recovery code changes
435 * Obtain the index of pinctrl node for bus recovery using gpio pins,