sbin/camcontrol/camcontrol.c

1104 		if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) {
1108 		if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
1115 		if (fc->valid & CTS_FC_VALID_SPEED)
1121 		if (sas->valid & CTS_SAS_VALID_SPEED)
1127 		if (pata->valid & CTS_ATA_VALID_MODE)
1133 		if (sata->valid & CTS_SATA_VALID_REVISION)
1152 		if (((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)
1157 		if (((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0)
1159 			if (((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)
1166 		} else if (((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)
1175 		if (pata->valid & CTS_ATA_VALID_MODE)
1177 		if ((pata->valid & CTS_ATA_VALID_ATAPI) && pata->atapi != 0)
1179 		if (pata->valid & CTS_ATA_VALID_BYTECOUNT)
1187 		if (sata->valid & CTS_SATA_VALID_REVISION)
1191 		if (sata->valid & CTS_SATA_VALID_MODE)
1193 		if ((sata->valid & CTS_SATA_VALID_ATAPI) && sata->atapi != 0)
1195 		if (sata->valid & CTS_SATA_VALID_BYTECOUNT)
1203 		if (scsi->valid & CTS_SCSI_VALID_TQ) {
3903 			 * may not be valid, so use the maximum.
3950 				 * If we got a SCSI error and no valid length,
5041 		if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) {
5055 		if (spi->valid & CTS_SPI_VALID_SYNC_OFFSET) {
5060 		if (spi->valid & CTS_SPI_VALID_BUS_WIDTH) {
5065 		if (spi->valid & CTS_SPI_VALID_DISC) {
5075 		if (fc->valid & CTS_FC_VALID_WWNN)
5078 		if (fc->valid & CTS_FC_VALID_WWPN)
5081 		if (fc->valid & CTS_FC_VALID_PORT)
5083 		if (fc->valid & CTS_FC_VALID_SPEED)
5091 		if (sas->valid & CTS_SAS_VALID_SPEED)
5099 		if ((pata->valid & CTS_ATA_VALID_MODE) != 0) {
5103 		if ((pata->valid & CTS_ATA_VALID_ATAPI) != 0) {
5107 		if ((pata->valid & CTS_ATA_VALID_BYTECOUNT) != 0) {
5116 		if ((sata->valid & CTS_SATA_VALID_REVISION) != 0) {
5120 		if ((sata->valid & CTS_SATA_VALID_MODE) != 0) {
5124 		if ((sata->valid & CTS_SATA_VALID_ATAPI) != 0) {
5128 		if ((sata->valid & CTS_SATA_VALID_BYTECOUNT) != 0) {
5132 		if ((sata->valid & CTS_SATA_VALID_PM) != 0) {
5136 		if ((sata->valid & CTS_SATA_VALID_TAGS) != 0) {
5140 		if ((sata->valid & CTS_SATA_VALID_CAPS) != 0) {
5149 		if (ata->valid & CTS_ATA_VALID_TQ) {
5159 		if (scsi->valid & CTS_SCSI_VALID_TQ) {
5960 		ccb->cts.xport_specific.valid = 0;
5961 		ccb->cts.proto_specific.valid = 0;
5963 			spi->valid |= CTS_SPI_VALID_DISC;
5978 				ata->valid |= CTS_SCSI_VALID_TQ;
5985 				scsi->valid |= CTS_SCSI_VALID_TQ;
5999 			spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
6012 			spi->valid |= CTS_SPI_VALID_SYNC_RATE;
6050 			sata->valid |= CTS_SATA_VALID_REVISION;
6068 				pata->valid |= CTS_ATA_VALID_MODE;
6071 				sata->valid |= CTS_SATA_VALID_MODE;
6108 			spi->valid |= CTS_SPI_VALID_BUS_WIDTH;
6802 			warnx("%s argument only valid with overwrite "
9099 	 * If our valid data doesn't include the full reported length,
9130 	 * If we don't have enough valid length to include the timeout
9148 	 * If we don't have enough valid length to contain the full timeout
9955 			errx(1, "subcommand \"%s\" requires a valid device "