Lines Matching defs:gain
71 * the monitor gain is set to a default value.
114 #define DGAIN 5. /* subcarrier gain */
503 int gain; /* audio gain */
528 int gain; /* codec gain */
529 int mongain; /* codec monitor gain */
852 * Set the input port and monitor gain for the next buffer.
1240 * not in minute sync, fiddle the codec gain. Note the SNR is
1356 up->status, up->gain, sp->refid,
1483 up->status, up->gain, tepoch, up->epomax,
1685 * adjust the codec gain. Note the epoch is buffered from the
1861 up->status, up->gain, up->yepoch,
1969 * Save the data channel gain, then QSY to the probe channel and
1991 up->mitig[up->achan].gain = up->gain;
1994 up->mitig[up->achan].gain = up->gain;
2026 nsec, up->status, up->gain, up->yepoch, up->epomax,
2195 up->rsec - 1, up->status, up->gain, up->yepoch,
2510 up->gain = MAXGAIN / 2;
2513 * Initialize the station processes for audio gain, select bit,
2521 cp->gain = up->gain;
2579 up->mitig[up->achan].gain = up->gain;
2583 up->gain = up->mitig[up->achan].gain;
2608 * agc audio gain (0-255)
2655 up->watch, up->mitig[up->dchan].gain, sp->refid,
2665 * wwv_gain - adjust codec gain
2669 * there are no clips, the gain is bumped up; if there are more than
2688 * gain control field. Thus, it may take awhile for changes to
2692 up->gain += 4;
2693 if (up->gain > MAXGAIN)
2694 up->gain = MAXGAIN;
2696 up->gain -= 4;
2697 if (up->gain < 0)
2698 up->gain = 0;
2700 audio_gain(up->gain, up->mongain, up->port);