Lines Matching refs:Added
72 * Added union of request descriptors.
73 * Added union of reply descriptors.
75 * Added define for MPI2_VERSION_02_00.
81 * Added a sixth key value for the WriteSequence register
83 * Added message function codes for Diagnostic Buffer Post
90 * Added #defines for marking a reply descriptor as unused.
101 * Added RAID Accelerator functionality.
104 * Added MSI-x index mask and shift for Reply Post Host
106 * Added function code for Host Based Discovery Action.
108 * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
109 * Added defines for product-specific range of message
112 * Added alternative defines for the SGE Direction bit.
115 * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
117 * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
125 * Added Hard Reset delay timings.
130 * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
139 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
140 * Added Manufacturing Page 11.
141 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
148 * Added configuration pages IOC Page 8 and Driver
154 * Added new value for AccessStatus field of SAS Device
156 * 10-31-07 02.00.04 Added missing SEPDevHandle field to
162 * Added MPI2_CONFIG_PAGE_BIOS_4.
163 * Added MPI2_CONFIG_PAGE_LOG_0.
165 * Added SAS Device IDs.
169 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
170 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
172 * Added missing MaxNumRoutedSasAddresses field to
174 * Added SAS Port Page 0.
181 * Added two new values for the Physical Disk Coercion Size
183 * Added product-specific Manufacturing pages 16 to 31.
186 * Added new bit to AdditionalControlFlags of SAS IO Unit
188 * Added SupportedPhysDisks field to RAID Volume Page 1 and
190 * Added additional defines for RAID Volume Page 0
194 * Added PhysDiskAttributes field (and related defines) to
196 * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
197 * Added three new DiscoveryStatus bits for SAS IO Unit
200 * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
203 * Added two new AccessStatus values to SAS Device Page 0
204 * for indicating routing problems. Added 3 reserved words
209 * Added more pending task bits to RAID Volume Page 0
211 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
212 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
217 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
218 * Added PortGroups, DmaGroup, and ControlGroup fields to
220 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
222 * Added expander reduced functionality data to SAS
224 * Added SAS PHY Page 2 and SAS PHY Page 3.
225 * 07-30-09 02.00.12 Added IO Unit Page 7.
226 * Added new device ids.
227 * Added SAS IO Unit Page 5.
228 * Added partial and slumber power management capable flags
230 * Added PhyInfo defines for power condition.
231 * Added Ethernet configuration pages.
232 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
233 * Added SAS PHY Page 4 structure and defines.
239 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
240 * Added PowerManagementCapabilities to IO Unit Page 7.
241 * Added PortWidthModGroup field to
243 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
244 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
245 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
246 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
248 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
249 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
252 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
255 * Added BoardTemperature and BoardTemperatureUnits fields
257 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
259 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
260 * Added IO Unit Page 8, IO Unit Page 9,
262 * Added SASNotifyPrimitiveMasks field to
268 * Added SpinupFlags field containing a Disable Spin-up bit
271 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
272 * Added UEFIVersion field to BIOS Page 1 and defined new
275 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
276 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
279 * Added some defines for 12G SAS speeds.
280 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
283 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
285 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
287 * Added EnclosureLevel and ConnectorName fields to
289 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
291 * Added EnclosureLevel field to
293 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
301 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
312 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
314 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
315 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
317 * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
318 * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
320 * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command
322 * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
323 * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
330 * Added TotalImageSize field to FWDownload Request.
331 * Added reserved words to FWUpload Request.
332 * 06-26-07 02.00.02 Added IR Configuration Change List Event.
338 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
340 * Added SASAddress field to Initiator Device Table
342 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
347 * Added define for
349 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
350 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
357 * Added Log Entry Added Event and related structure.
358 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
360 * Added MaxVolumes and MaxPersistentEntries fields to
362 * Added ProtocalFlags and IOCCapabilities fields to
372 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
373 * Added two new RAIDOperation values for Integrated RAID
375 * Added four new IR Configuration Change List Event data
377 * Added two new ReasonCode defines for SAS Device Status
379 * Added three new DiscoveryStatus bits for the SAS
381 * Added Multiplexing Status Change bit to the PhyStatus
385 * Added defines for the indivdual signature bytes
387 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
388 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
390 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
393 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
394 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
395 * Added two new reason codes for SAS Device Status Change
397 * Added new event: SAS PHY Counter.
398 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
399 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
400 * Added new product id family for 2208.
401 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
402 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
403 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
404 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
405 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
406 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
407 * Added Host Based Discovery Phy Event data.
408 * Added defines for ProductID Product field
412 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
413 * Added PowerManagementControl Request structures and
416 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
417 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
418 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
421 * Added Temperature Threshold Event.
422 * Added Host Message Event.
423 * Added Send Host Message request and reply.
428 * 08-24-11 02.00.19 Added PhysicalPort field to
432 * 03-29-12 02.00.21 Added a product specific range to event values.
433 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
434 * Added ElapsedSeconds field to
438 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
439 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
440 * Added Encrypted Hash Extended Image.
441 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
448 * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
449 * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
452 * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
454 * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
455 * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
457 * Added product-specific range to RAID Action values.
459 * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
460 * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
461 * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
462 * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
467 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
469 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
474 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
476 * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA
484 * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
491 * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure.
493 * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT
495 * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and
501 * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
504 * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
505 * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
507 * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
509 * 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
510 * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
512 * 05-25-11 02.00.07 Added Flags field and related defines to
519 * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.