dev/mpr/mpr_sas.c

183 			mpr_dprint(sassc->sc, MPR_INIT,
191 		mpr_dprint(sassc->sc, MPR_INIT, "%s refcount %u\n", __func__,
202 		mpr_dprint(sassc->sc, MPR_INFO, "Unfreezing SIM queue\n");
216 			mpr_dprint(sassc->sc, MPR_INIT,
227 		mpr_dprint(sassc->sc, MPR_INIT, "%s refcount %u\n", __func__,
265 		mpr_dprint(sc, MPR_INFO, "Unfreezing devq for target ID %d\n",
295 		mpr_dprint(sc, MPR_ERROR, "unable to alloc CCB for rescan\n");
301 		mpr_dprint(sc, MPR_ERROR, "unable to create path for rescan\n");
311 	mpr_dprint(sc, MPR_TRACE, "%s targetid %u\n", __func__, targetid);
375 		mpr_dprint(sc, MPR_FAULT, "%s NULL reply resetting device "
383 		mpr_dprint(sc, MPR_ERROR, "IOCStatus = 0x%x while resetting "
387 	mpr_dprint(sc, MPR_XINFO, "Reset aborted %u commands\n",
392 	mpr_dprint(sc, MPR_XINFO, "clearing target %u handle 0x%04x\n",
444 		mpr_dprint(sc, MPR_ERROR,
453 		mpr_dprint(sc, MPR_ERROR,
475 	mpr_dprint(sc, MPR_INFO, "%s: Sending reset for target ID %d\n",
507 		mpr_dprint(sc, MPR_ERROR, "%s : invalid handle 0x%x \n",
516 		mpr_dprint(sc, MPR_ERROR, "%s: command alloc failure\n",
539 	mpr_dprint(sc, MPR_INFO, "%s: Sending reset for target ID %d\n",
567 		mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for remove of "
574 		mpr_dprint(sc, MPR_FAULT, "%s NULL reply resetting device "
582 		mpr_dprint(sc, MPR_ERROR, "IOCStatus = 0x%x while resetting "
586 	mpr_dprint(sc, MPR_XINFO, "Reset aborted %u commands\n",
604 	mpr_dprint(sc, MPR_INFO, "clearing target %u handle 0x%04x\n",
607 		mpr_dprint(sc, MPR_INFO, "At enclosure level %d, slot %d, "
614 		mpr_dprint(sc, MPR_XINFO, "Completing missed command %p\n", tm);
640 		mpr_dprint(sc, MPR_XINFO, "%s: cm_flags = %#x for remove of "
649 		mpr_dprint(sc, MPR_FAULT, "%s NULL reply removing device "
655 	mpr_dprint(sc, MPR_XINFO, "%s on handle 0x%04x, IOCStatus= 0x%x\n",
761 		mpr_dprint(sc, MPR_ERROR, "Cannot allocate SIMQ\n");
770 		mpr_dprint(sc, MPR_ERROR, "Cannot allocate SIM\n");
792 		mpr_dprint(sc, MPR_ERROR, "Error %d registering SCSI bus\n",
872 			mpr_dprint(sc, MPR_ERROR,
978 		mpr_dprint(sc, MPR_XINFO | MPR_MAPPING, "Discovery has "
995 	mpr_dprint(sassc->sc, MPR_TRACE, "ccb func_code 0x%x\n",
1113 		mpr_dprint(sassc->sc, MPR_XINFO, "mprsas_action "
1120 		mpr_dprint(sassc->sc, MPR_XINFO, "mprsas_action faking success "
1147 	mpr_dprint(sc, MPR_XINFO, "%s code %x target %d lun %jx\n", __func__,
1152 		mpr_dprint(sc, MPR_ERROR, "unable to create path for reset "
1222 	mpr_dprint(sc, MPR_INIT, "%s startup\n", __func__);
1234 	mpr_dprint(sc, MPR_INIT, "%s startup %u after command completion\n",
1243 			mpr_dprint(sc, MPR_INIT, "target %u outstanding %u\n",
1285 		mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for LUN reset! "
1373 		mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for target "
1435 		mpr_dprint(sc, MPR_ERROR, "%s null devhandle for target_id "
1467 		mpr_dprint(sc, MPR_ERROR, "unexpected reset type 0x%x\n", type);
1471 	mpr_dprint(sc, MPR_INFO, "to target %u handle 0x%04x\n", target->tid,
1474 		mpr_dprint(sc, MPR_INFO, "At enclosure level %d, slot %d, "
1590 		mpr_dprint(sc, MPR_ERROR,"%s null devhandle for target_id %d\n",
1621 	mpr_dprint(sc, MPR_INFO, "Sending reset from %s for target ID %d\n",
1627 		mpr_dprint(sc, MPR_RECOVERY,
1646 	mpr_dprint(sc, MPR_XINFO, "Timeout checking cm %p\n", cm);
1661 		mpr_dprint(sc, MPR_ERROR, "command timeout with NULL ccb\n");
1672 		mpr_dprint(sc, MPR_ERROR, "At enclosure level %d, slot %d, "
1688 		mpr_dprint(sc, MPR_RECOVERY, "queued timedout cm %p for "
1692 		mpr_dprint(sc, MPR_RECOVERY, "timedout cm %p allocated tm %p\n",
1708 		mpr_dprint(sc, MPR_RECOVERY, "timedout cm %p failed to "
1748 		mpr_dprint(sc, MPR_ERROR, "Parameter list length is Zero\n");
1754 		mpr_dprint(sc, MPR_ERROR, "Unable to allocate memory to "
1767 		mpr_dprint(sc, MPR_XINFO, "Number of descriptors in "
1775 		mpr_dprint(sc, MPR_ERROR, "data length: %d is greater than "
1890 	mpr_dprint(sc, MPR_TRACE, "ccb %p target flag %x\n", ccb, targ->flags);
1892 		mpr_dprint(sc, MPR_ERROR, "%s NULL handle for target %u\n",
1899 		mpr_dprint(sc, MPR_ERROR, "%s Raid component no SCSI IO "
1911 		mpr_dprint(sc, MPR_TRACE, "%s Command is not in progress for "
1931 		mpr_dprint(sc, MPR_INFO, "%s shutting down\n", __func__);
1943 		mpr_dprint(sc, MPR_INFO, "%s: Freezing devq for target ID %d\n",
2214 	mpr_dprint(sc, MPR_XINFO, "response_code(0x%01x): %s\n", response_code,
2352 	mpr_dprint(sc, MPR_XINFO, "\thandle(0x%04x), ioc_status(%s)(0x%04x)\n",
2355 		mpr_dprint(sc, MPR_XINFO, "At enclosure level %d, slot %d, "
2362 	mpr_dprint(sc, MPR_XINFO, "\tscsi_status(%s)(0x%02x), "
2368 		mpr_dprint(sc, MPR_XINFO, "-> Sense Buffer Data : Start :\n");
2370 		mpr_dprint(sc, MPR_XINFO, "-> Sense Buffer Data : End :\n");
2589 	mpr_dprint(sc, MPR_TRACE,
2675 			mpr_dprint(sc, MPR_XINFO, "Error sending command, "
2702 		mpr_dprint(sc, MPR_INFO, "Decrementing SSU count.\n");
2718 				mpr_dprint(sc, MPR_XINFO,
2877 			mpr_dprint(sc, MPR_XINFO, "Target %d supports SSU\n",
2974 		mpr_dprint(sc, MPR_XINFO, "Command completed, unfreezing SIM "
3005 		mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x on SMP "
3013 		mpr_dprint(sc, MPR_ERROR, "%s: NULL cm_reply!\n", __func__);
3025 		mpr_dprint(sc, MPR_XINFO, "%s: IOCStatus %04x SASStatus %02x\n",
3031 	mpr_dprint(sc, MPR_XINFO, "%s: SMP request to SAS address %#jx "
3073 		mpr_dprint(sc, MPR_ERROR, "%s: physical addresses not "
3085 			mpr_dprint(sc, MPR_ERROR, "%s: multiple request or "
3131 		mpr_dprint(sc, MPR_ERROR, "%s: physical addresses not "
3149 			mpr_dprint(sc, MPR_ERROR, "%s: multiple request or "
3188 		mpr_dprint(sc, MPR_ERROR, "%s: cannot allocate command\n",
3206 	mpr_dprint(sc, MPR_XINFO, "%s: sending SMP request to SAS address "
3268 		mpr_dprint(sc, MPR_ERROR, "%s: error %d returned from "
3298 		mpr_dprint(sc, MPR_ERROR, "%s: target %d does not exist!\n",
3346 			mpr_dprint(sc, MPR_ERROR, "%s: handle %d does not have "
3356 			mpr_dprint(sc, MPR_ERROR, "%s: handle %d does not have "
3364 			mpr_dprint(sc, MPR_ERROR, "%s: handle %d parent %d "
3375 			mpr_dprint(sc, MPR_ERROR, "%s: handle %d parent %d "
3383 			mpr_dprint(sc, MPR_ERROR, "%s: handle %d parent handle "
3396 		mpr_dprint(sc, MPR_INFO, "%s: unable to find SAS address for "
3427 		mpr_dprint(sc, MPR_ERROR, "command alloc failure in "
3449 	mpr_dprint(sc, MPR_INFO, "%s: Sending reset for target ID %d\n",
3479 		mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for reset of "
3486 	mpr_dprint(sc, MPR_XINFO, "%s: IOCStatus = 0x%x ResponseCode = 0x%x\n",
3514 		mpr_dprint(sassc->sc, MPR_XINFO, "%s clearing MPR_TRACE\n",
3589 				mpr_dprint(sc, MPR_ERROR, "Unable to alloc "
3698 		mpr_dprint(sc, MPR_ERROR, "Unable to alloc CCB for EEDP "
3705 		mpr_dprint(sc, MPR_ERROR, "Unable to create path for EEDP "
3725 			mpr_dprint(sc, MPR_ERROR, "Unable to alloc LUN for "
3736 	mpr_dprint(sc, MPR_INFO, "Sending read cap: path %s handle %d\n",
3747 		mpr_dprint(sc, MPR_ERROR, "Unable to alloc read capacity "
3829 			mpr_dprint(sassc->sc, MPR_INFO, "LUN %d for target ID "
3908 	mpr_dprint(sc, MPR_XINFO,
3929 		mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for port enable! "
3935 		mpr_dprint(sc, MPR_FAULT, "Portenable NULL reply\n");
3938 		mpr_dprint(sc, MPR_FAULT, "Portenable failed\n");
3942 		mpr_dprint(sc, MPR_XINFO, "disestablish config intrhook\n");