Lines Matching defs:address
478 /* read mac address */
482 /* multicast address update */
657 * Retrieves the PHY address and ID for both PHY's which do and do not use
677 * (e.g. integrated copper PHYs), an address of 1 should
721 * The address field in the I2CCMD register is 3 bits and 0 is invalid.
727 DEBUGOUT2("Vendor ID 0x%08X read at address %u\n",
736 DEBUGOUT1("PHY address %u was unreadable\n",
1478 /* Install any alternate MAC address into RAR0 */
1509 /* Setup the receive address */
2005 * e1000_read_mac_addr_82575 - Read device MAC address
2015 * If there's an alternate MAC address place it in RAR0
2017 * address.
2222 * than the 10ms recommended by the pci-e spec. To address this we need to
2541 /* Install any alternate MAC address into RAR0 */
2786 * @addr: EMI address to program
2787 * @data: pointer to value to read/write from/to the EMI address
2790 static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address,
2797 ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address);
2812 * @addr: EMI address to program
2813 * @data: value to be read from the EMI address
3265 * @dev_addr: device address
3269 * a specified device address.
3356 * @dev_addr: device address
3360 * a specified device address.