Lines Matching refs:usSI
130 unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
139 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
149 pSettings->usDspIRQ = usSI & 0x00FF;
150 pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
169 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
178 pSettings->usUartIRQ = usSI & 0x000F;
179 if (((usSI & 0xFF00) >> 8) < numUartBases) {
180 pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
207 unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
274 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
279 if ((usSI & 0xFF) == mwave_uart_irq) {
282 "smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
285 "smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
290 bRC = smapi_request(0x1403, 0x0100, 0, usSI,
291 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
294 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
300 if ((usSI >> 8) == uartio_index) {
303 "smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
306 "smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
311 bRC = smapi_request (0x1403, 0x0100, 0, usSI,
312 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
315 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
327 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
332 if ((usSI & 0xFF) == mwave_uart_irq) {
335 "smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
338 "smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
343 bRC = smapi_request(0x1405, 0x0100, 0, usSI,
344 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
347 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
353 if ((usSI >> 8) == uartio_index) {
356 "smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
359 "smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
364 bRC = smapi_request (0x1405, 0x0100, 0, usSI,
365 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
368 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
380 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
383 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
399 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
402 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
404 bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
405 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
408 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
414 if ((usSI & 0xff) == uartio_index) {
417 "smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
420 "smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
426 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
429 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
431 bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
432 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
435 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
446 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
453 usSI = (usSI & 0xff00) | mwave_3780i_irq;
456 bRC = smapi_request(0x1803, 0x0101, usDI, usSI,
457 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
461 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
465 usSI = (usSI & 0x00ff) | (uartio_index << 8);
468 usSI = (usSI & 0xff00) | mwave_uart_irq;
470 bRC = smapi_request(0x1805, 0x0101, 0, usSI,
471 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
475 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
479 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
499 unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
507 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);