perf unwind: Use perf_arch_reg_{ip|sp}() to substitute macros

We use perf_arch_reg_ip() and perf_arch_reg_sp() to substitute macros
for obtaining the register numbers of SP and IP. This modification
enables cross analysis in the unwinding, therefore, the unwinding is
not restricted to the predefined values by the macros.

Consequently, the macros LIBUNWIND__ARCH_REG_{IP|SP} are removed since
they are no longer used.

Committer notes:

Add missing "util/env.h" header to make sure we have the definition for
perf_env__arch(), that when built with NO_LIBUNWIND=1 isn't available,
i.e. it was being included by sheer luck.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Don't show unwind error messages when augmenting frame pointer stack

Commit Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when
using 'perf record --call-graph=fp'") intended to add a 'best effort'
DWARF unwind that improved the frame pointer stack in most scenarios.

It's expected that the unwind will fail sometimes, but this shouldn't be
reported as an error. It only works when the return address can be
determined from the contents of the link register alone.

Fix the error shown when the unwinder requires extra registers by adding
a new flag that suppresses error messages. This flag is not set in the
normal --call-graph=dwarf unwind mode so that behavior is not changed.

Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf maps: Merge 'struct maps' with 'struct map_groups'

And pick the shortest name: 'struct maps'.

The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.

That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.

First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Use 'struct map_symbol' in 'struct unwind_entry'

To help in passing that info around to callchain routines that, for the
same reason, are moving to use 'struct map_symbol'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-epsiibeprpxa8qpwji47uskc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Fix libunwind when tid != pid

Commit e5adfc3e7e77 ("perf map: Synthesize maps only for thread group
leader") changed the recording side so that we no longer get mmap events
for threads other than the thread group leader (when synthesising these
events for threads which exist before perf is started).

When a file recorded after this change is loaded, the lack of mmap
records mean that unwinding is not set up for any other threads.

This can be seen in a simple record/report scenario:

perf record --call-graph=dwarf -t $TID
perf report

If $TID is a process ID then the report will show call graphs, but if
$TID is a secondary thread the output is as if --call-graph=none was
specified.

Following the rationale in that commit, move the libunwind fields into
struct map_groups and update the libunwind functions to take this
instead of the struct thread. This is only required for
unwind__finish_access which must now be called from map_groups__delete
and the others are changed for symmetry.

Note that unwind__get_entries keeps the thread argument since it is
required for symbol lookup and the libdw unwind provider uses the thread
ID.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: e5adfc3e7e77 ("perf map: Synthesize maps only for thread group leader")
Link: http://lkml.kernel.org/r/20190815100146.28842-2-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf unwind: Provide only forward declarations for pointer types

No need to drag the headers, helps in untangling them and reducing build
time.

Link: http://lkml.kernel.org/n/tip-l8soqph92duyw5jdha0fij8b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Add initialized arg into unwind__prepare_access

Adding initialized arg into unwind__prepare_access to get feedback about
the initialization state.

It's not possible to get it from error code, because we return 0 even in
case we don't recognize dso, which is valid.

The 'initialized' value is used in following patch to speedup
unwind__prepare_access calls logic in fork path.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-4-git-send-email-jolsa@kernel.org
[ Remove ; after static inline function signatures, fixes build break ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Change macro names of perf register

Use macro name prefixed with "LIBUNWIND_ARCH" for better understanding
that the regs used by callbacks of libunwind are arch specific. The real
regs used should be defined in the wrapper file of
"unwind-libunwind-local.c" for each supported arch.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466578626-92406-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Change fixed name of libunwind__arch_reg_id to macro

For local libunwind, it uses the fixed methods to convert register id
according to the host platform, but in remote libunwind, this convert
function should be the one for remote architecture. This patch changes
the fixed name to macro and code for each remote platform can be
compiled indivadually.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-12-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Check the target platform before assigning unwind methods

Currently, 'perf script' uses host unwind methods to parse perf.data
callchain info without taking the target architecture into account, i.e.
assuming the perf.data file was generated on the same machine where the
analysis is being performed. So we get wrong result without any warnings
when unwinding callchains of x86(32-bit) on x86(64-bit) machine.

This patch adds an extra step that checks the target platform before
assigning unwind methods. In later patches in this series, we can use
this info to assign the right unwind methods for supported platforms.

Committer note:

After fixing it to register the local unwinder for live mode tools
('perf trace', 'perf top'), i.e. tools that don't use a perf.data file,
it works as intended and passes the 'perf test unwind' test:

# perf trace -e nanosleep --call dwarf usleep 1
0.328 ( 0.058 ms): usleep/11115 nanosleep(rqtp: 0x7fff083fa480) = 0
__nanosleep_nocancel+0x7 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/bin/usleep)
# perf test 48
48: Test dwarf unwind : Ok
#

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-11-git-send-email-hekuang@huawei.com
[ Fixed exit path for 'live' mode tools, where we need to default to local unwinding ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Introduce 'struct unwind_libunwind_ops' for local unwind

Currently, libunwind operations are fixed, and they are chosen according
to the host architecture. This will lead to a problem that if a thread
is run as x86_32 on a x86_64 machine, perf will use libunwind methods
for x86_64 to parse the callchain and get wrong results.

This patch changes the fixed methods of libunwind operations to be
thread/map related, and each thread can have individual libunwind
operations. Local libunwind methods are registered as default value.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-4-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchains: Use thread->mg->machine

The unwind__get_entries() already receives the thread parameter, from where it can
obtain the matching machine structure, shorten the signature.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-isjc6bm8mv4612mhi6af64go@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchain: Use global caching provided by libunwind

The libunwind provides two caching policy which are global and
per-thread. As perf unwinds callchains in a single thread, it'd
sufficient to use global caching.

This speeds up my perf report from 14s to 7s on a ~260MB data file.
Although the output sometimes contains a slight difference (~0.01% in
terms of number of lines printed) on callchains which were not resolved.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchain: Create an address space per thread

The unw_addr_space_t in libunwind represents an address space to be used
for stack unwinding. It doesn't need to be create/destory everytime to
unwind callchain (as in get_entries) and can have a same lifetime as
thread (unless exec called).

So move the address space construction/destruction logic to the thread
lifetime handling functions. This is a preparation to enable caching in
the unwind library.

Note that it saves unw_addr_space_t object using thread__set_priv(). It
seems currently only used by perf trace and perf kvm stat commands which
don't use callchain.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-3-git-send-email-namhyung@kernel.org
[ Fixup unwind-libunwind.c missing CALLCHAIN_DWARF definition, added
missing __maybe_unused on unused parameters in stubs at util/unwind.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools: Consolidate types.h

Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>

perf callchain: Introduce HAVE_DWARF_UNWIND_SUPPORT macro

Introducing global macro HAVE_DWARF_UNWIND_SUPPORT to indicate we have
dwarf unwind support. Any library providing the dwarf post unwind
support will enable this macro.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchain: Rename unwind__arch_reg_id into libunwind__arch_reg_id

Renaming unwind__arch_reg_id into libunwind__arch_reg_id, so it's clear
it's specific to libunwind.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchain: Add mask into struct regs_dump

Adding mask info into struct regs_dump to make the registers information
compact.

The mask was always passed along, so logically the mask info fits more
into the struct regs_dump.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Limit max callchain using max_stack on DWARF unwinding too

It was affecting only frame-pointer (fp) based callchain processing.

Usage example:

perf top --call-graph dwarf,1024 --max-stack 2

Works for any tool that does callchain resolving and provides a
--max-stack option.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-eu45v8s3tq9ruay8tpfyon79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools/perf: Standardize feature support define names to: HAVE_{FEATURE}_SUPPORT

Standardize all the feature flags based on the HAVE_{FEATURE}_SUPPORT naming convention:

HAVE_ARCH_X86_64_SUPPORT
HAVE_BACKTRACE_SUPPORT
HAVE_CPLUS_DEMANGLE_SUPPORT
HAVE_DWARF_SUPPORT
HAVE_ELF_GETPHDRNUM_SUPPORT
HAVE_GTK2_SUPPORT
HAVE_GTK_INFO_BAR_SUPPORT
HAVE_LIBAUDIT_SUPPORT
HAVE_LIBELF_MMAP_SUPPORT
HAVE_LIBELF_SUPPORT
HAVE_LIBNUMA_SUPPORT
HAVE_LIBUNWIND_SUPPORT
HAVE_ON_EXIT_SUPPORT
HAVE_PERF_REGS_SUPPORT
HAVE_SLANG_SUPPORT
HAVE_STRLCPY_SUPPORT

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-u3zvqejddfZhtrbYbfhi3spa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Convert to LIBUNWIND_SUPPORT

For building perf without libunwind, we can set NO_LIBUNWIND=1 as a
argument of make. It then defines NO_LIBUNWIND_SUPPORT macro for C code
to do the proper handling. However it usually used in a negative
semantics - e.g. #ifndef - so we saw double negations which can be
misleading. Convert it to a positive form to make it more readable.

Also change NO_PERF_REGS macro to HAVE_PERF_REGS for the same reason.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use __maybe_used for unused variables

perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support for DWARF CFI unwinding on post processing

This brings the support for DWARF cfi unwinding on perf post
processing. Call frame informations are retrieved and then passed
to libunwind that requests memory and register content from the
applications.

Adding unwind object to handle the user stack backtrace based
on the user register values and user stack dump.

The unwind object access the libunwind via remote interface
and provides to it all the necessary data to unwind the stack.

The unwind interface provides following function:
unwind__get_entries

And callback (specified in above function) to retrieve
the backtrace entries:
typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry,
void *arg);

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-12-git-send-email-jolsa@redhat.com
[ Replaced use of perf_session by usage of perf_evsel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>