perf thread_map: Reduce exposure of libperf internal API

Remove unnecessary include of internal threadmap.h and refcount.h in
thread_map.h. Switch to using public APIs when possible or including
the internal header file in the C file. Fix a transitive dependency in
openat-syscall.c broken by the clean up.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libperf: Rename the PERF_RECORD_ structs to have a "perf" prefix

Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libperf: Add perf_thread_map__nr/perf_thread_map__pid functions

So it's part of libperf library as basic functions operating on
perf_thread_map objects.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libperf: Add perf_thread_map__get()/perf_thread_map__put()

Move the following functions:

thread_map__get()
thread_map__put()
thread_map__comm()

to libperf with the following names:

perf_thread_map__get()
perf_thread_map__put()
perf_thread_map__comm()

Add the perf_thread_map__comm() function for it to work/compile.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libperf: Add perf_thread_map__new_dummy() function

Moving the following functions:

thread_map__new_dummy()
thread_map__realloc()
thread_map__set_pid()

to libperf with the following names:

perf_thread_map__new_dummy()
perf_thread_map__realloc()
perf_thread_map__set_pid()

the other 2 functions are dependencies of the
perf_thread_map__new_dummy() function.

The perf_thread_map__realloc() function is not exported.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libperf: Add perf_thread_map struct

Add perf_thread_map struct to libperf.

It's added as a declaration into into:

include/perf/threadmap.h

which will be included by users.

The perf_thread_map struct definition is added into:

include/internal/threadmap.h

which is not to be included by users, but shared within perf and
libperf.

We tried the total separation of the perf_thread_map struct in libperf,
but it lead to complications and much bigger changes in perf code, so we
decided to share the declaration.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-32-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Rename struct thread_map to struct perf_thread_map

Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Ignore error thread when enabling system-wide --per-thread

If we execute 'perf stat --per-thread' with non-root account (even set
kernel.perf_event_paranoid = -1 yet), it reports the error:

jinyao@skl:~$ perf stat --per-thread
Error:
You may not have permission to collect system-wide stats.

Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_SYS_ADMIN).

The current value is 2:

-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN

To make this setting permanent, edit /etc/sysctl.conf too, e.g.:

kernel.perf_event_paranoid = -1

Perhaps the ptrace rule doesn't allow to trace some processes. But anyway
the global --per-thread mode had better ignore such errors and continue
working on other threads.

This patch will record the index of error thread in perf_evsel__open()
and remove this thread before retrying.

For example (run with non-root, kernel.perf_event_paranoid isn't set):

jinyao@skl:~$ perf stat --per-thread
^C
Performance counter stats for 'system wide':

vmstat-3458 6.171984 cpu-clock:u (msec) # 0.000 CPUs utilized
perf-3670 0.515599 cpu-clock:u (msec) # 0.000 CPUs utilized
vmstat-3458 1,163,643 cycles:u # 0.189 GHz
perf-3670 40,881 cycles:u # 0.079 GHz
vmstat-3458 1,410,238 instructions:u # 1.21 insn per cycle
perf-3670 3,536 instructions:u # 0.09 insn per cycle
vmstat-3458 288,937 branches:u # 46.814 M/sec
perf-3670 936 branches:u # 1.815 M/sec
vmstat-3458 15,195 branch-misses:u # 5.26% of all branches
perf-3670 76 branch-misses:u # 8.12% of all branches

12.651675247 seconds time elapsed

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1516117388-10120-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use target->per_thread and target->system_wide flags

Mathieu Poirier reports issue in commit ("73c0ca1eee3d perf thread_map:
Enumerate all threads from /proc") that it has negative impact on 'perf
record --per-thread'. It has the effect of creating a kernel event for
each thread in the system for 'perf record --per-thread'.

Mathieu Poirier's patch ("perf util: Do not reuse target->per_thread flag")
can fix this issue by creating a new target->all_threads flag.

This patch is based on Mathieu Poirier's patch but it doesn't use a new
target->all_threads flag. This patch just uses 'target->per_thread &&
target->system_wide' as a condition to check for all threads case.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 73c0ca1eee3d ("perf thread_map: Enumerate all threads from /proc")
Link: http://lkml.kernel.org/r/1518467557-18505-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
[Fixed checkpatch warning about line over 80 characters]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Enumerate all threads from /proc

This patch calls thread_map__new_all_cpus() to enumerate all threads
from /proc if per-thread flag is enabled.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512482591-4646-10-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Add method to map all threads in the system

Reusing the thread_map__new_by_uid() proc scanning already in place to
return a map with all threads in the system.

Based-on-a-patch-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-khh28q0wwqbqtrk32bfe07hd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf thread_map: Convert thread_map.refcnt from atomic_t to refcount_t

The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.

This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-10-git-send-email-elena.reshetova@intel.com
[ Did missing tests/thread-map.c conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Add thread_map__remove function

Add thread_map__remove function to remove thread from thread map.

Add automated test also.

Committer notes:

Testing it:

# perf test "Remove thread map"
39: Remove thread map : Ok
# perf test -v "Remove thread map"
39: Remove thread map :
--- start ---
test child forked, pid 4483
2 threads: 4482, 4483
1 thread: 4483
0 thread:
test child finished with 0
---- end ----
Remove thread map: Ok
#

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org
[ Added stdlib.h, to get the free() declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Make new_by_tid_str constructor public

It will be used in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Add has() method

Adding thread_map__has() to return bool of pid presence in threads map.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Add thread_map__new_event function

Introducing the thread_map__new_event function to create a struct
thread_map object from a thread_map event.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thrad_map: Add comm string into array

Adding support to hold comm name together with pids in 'struct
thread_map'. It will be useful for --per-thread option to display task
pid together with task name.

Adding thread_map__read_comms function that reads/set
comm string for the 'struct thread_map'.

Getting the task name from /proc/$pid/comm.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add reference counting for thread_map object

Adding reference counting for thread_map object, so it could be easily
shared among other objects.

Using thread_map__put instead thread_map__delete and making
thread_map__delete static.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-5-git-send-email-jolsa@kernel.org
[ Adjustments to move it ahead of the "comm" patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Change map entries into a struct

We need to store command names with the pid. Changing map entries to be
a struct holding pid. Process name is coming in shortly.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-2-git-send-email-jolsa@kernel.org
[ Split providing the set/get accessors from transforming the entries structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Don't access the array entries directly

Instead provide a method to set the array entries, and another to access
the contents.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-2-git-send-email-jolsa@kernel.org
[ Split providing the set/get accessors from transforming the entries structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread_map: Create dummy constructor out of open coded equivalent

Create a dummy thread_map, one that has just one entry and it is -1,
meaning 'all threads', as this ends up going down to perf_event_open().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8av26cz8uxmbnihl5mmrygp9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Add thread_map__nr() helper

Introduce and use the thread_map__nr() function to protect a possible
NULL pointer dereference and cleanup the code a bit.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix thread map that is type pid_t

Thread map is actually type pid_t and not int.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-3-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Allow multiple threads or processes in record, stat, top

Allow a user to collect events for multiple threads or processes
using a comma separated list.

e.g., collect data on a VM and its vhost thread:
perf top -p 21483,21485
perf stat -p 21483,21485 -ddd
perf record -p 21483,21485

or monitoring vcpu threads
perf top -t 21488,21489
perf stat -t 21488,21489 -ddd
perf record -t 21488,21489

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328718772-16688-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce per user view

The new --uid command line option will show only the tasks for a given
user, using the proc interface to figure out the existing tasks.

Kernel work is needed to close races at startup, but this should already
be useful in many use cases.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bdnspm000gw2l984a2t53o8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add fprintf methods for thread_map and cpu_map classes

For helping with debugging.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-m06n4rp7pwr6dlzwoq89cl69@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf threads: Move thread_map to separate file

To untangle it from struct thread handling, that is tied to symbols, etc.

Right now in the python bindings I'm working on I need just a subset of
the util/ files, untangling it allows me to do that.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>